]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/dnp5370.h
karo: tx6: increase SYS_BOOTM_LEN to 32MiB
[karo-tx-uboot.git] / include / configs / dnp5370.h
1 /*
2  * U-boot - Configuration file for SSV DNP5370 board
3  */
4
5 #ifndef __CONFIG_DNP5370_H__
6 #define __CONFIG_DNP5370_H__
7
8 /* this must come first */
9 #include <asm/config-pre.h>
10
11 /*
12  * Processor Settings
13  */
14 #define CONFIG_BFIN_CPU       bf537-0.3
15 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
16
17 /*
18  * Clock Settings
19  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
20  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
21  */
22 #define CONFIG_CLKIN_HZ                 25000000
23 #define CONFIG_CLKIN_HALF               0
24 #define CONFIG_PLL_BYPASS               0
25 #define CONFIG_VCO_MULT                 24
26 #define CONFIG_CCLK_DIV                 1
27 #define CONFIG_SCLK_DIV                 5
28
29 /*
30  * Memory Settings
31  */
32 #define CONFIG_MEM_ADD_WDTH     9
33 #define CONFIG_MEM_SIZE         32
34
35 #define CONFIG_EBIU_SDRRC_VAL   0x03a0
36 #define CONFIG_EBIU_SDBCTL_VAL  0x0013
37 #define CONFIG_EBIU_SDGCTL_VAL  0x8091998d
38
39 #define CONFIG_EBIU_AMGCTL_VAL  0xF7
40 #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
41 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
42
43 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
44 #define CONFIG_SYS_MALLOC_LEN   (128 * 1024)
45
46 /*
47  * Network Settings
48  */
49 #ifndef __ADSPBF534__
50 #define CONFIG_ROOTPATH        "/romfs"
51
52 #define CONFIG_BFIN_MAC         1
53 #define CONFIG_PHY_ADDR         0
54 #define CONFIG_RMII             1
55
56 #define CONFIG_CMD_MII
57 #define CONFIG_CMD_PING
58
59 #endif
60
61 /*
62  * Flash Settings
63  *
64  * Only 3 MB of the 4 MB NOR flash are addressable.
65  * But limiting the flash size does not seem to work.
66  * It seems the CFI detection has precedence.
67  */
68 #define CONFIG_FLASH_CFI_DRIVER
69 #define CONFIG_SYS_FLASH_BASE       0x20000000
70 #define CONFIG_SYS_FLASH_CFI
71 #define CONFIG_SYS_FLASH_PROTECTION
72 #define CONFIG_SYS_MAX_FLASH_BANKS  1
73 #define CONFIG_SYS_MAX_FLASH_SECT   71 /* (M29W320EB) */
74
75 /* 512k reserved for u-boot */
76 #define CONFIG_SYS_JFFS2_FIRST_SECTOR 15
77
78 /*
79  * Env Storage Settings
80  */
81 #define CONFIG_ENV_IS_IN_FLASH     1
82 #define CONFIG_ENV_ADDR       0x20004000
83 #define CONFIG_ENV_SIZE       0x00002000
84 #define CONFIG_ENV_SECT_SIZE  0x00002000 /* Total Size of Environment Sector */
85 #define CONFIG_ENV_OFFSET     0x00004000 /* (CONFIG_ENV_ADDR - CONFIG_FLASH_BASE) */
86
87 #define ENV_IS_EMBEDDED
88 #define LDS_BOARD_TEXT \
89         arch/blackfin/lib/built-in.o (.text*); \
90         arch/blackfin/cpu/built-in.o (.text*); \
91         . = DEFINED(env_offset) ? env_offset : .; \
92         common/env_embedded.o (.text*);
93
94 /*
95  * Misc Settings
96  */
97 #define CONFIG_CMD_GPIO
98 #define CONFIG_CMD_STRINGS
99 #define CONFIG_MISC_INIT_R
100 #define CONFIG_RTC_BFIN
101 #define CONFIG_SYS_LONGHELP
102
103 /* This disables the hardware watchdog (not inside the bfin) */
104 #define CONFIG_DNP5370_EXT_WD_DISABLE 1
105
106 #define CONFIG_UART_CONSOLE 0
107 #define CONFIG_BFIN_SERIAL
108 #define CONFIG_BAUDRATE     115200
109 #define CONFIG_BOOTCOMMAND  "bootm 0x20030000"
110 #define CONFIG_BOOTARGS     "console=ttyBF0,115200 root=/dev/mtdblock3 rootfstype=ext2"
111
112 /* Convenience commands to update Linux in NOR flash */
113 #define CONFIG_EXTRA_ENV_SETTINGS \
114         "fetchme=tftpboot 0x01000000 uImage;" \
115                 "iminfo\0" \
116         "flashme=protect off 0x20030000 0x2003ffff;" \
117                 "erase 0x20030000 0x202effff;" \
118                 "cp.b 0x01000000 0x20030000 0x2c0000\0" \
119         "runme=bootm 0x01000000\0"
120
121 #endif