]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/dnp5370.h
at91sam9260ek: move board id setup to config header
[karo-tx-uboot.git] / include / configs / dnp5370.h
1 /*
2  * U-boot - Configuration file for SSV DNP5370 board
3  */
4
5 #ifndef __CONFIG_DNP5370_H__
6 #define __CONFIG_DNP5370_H__
7
8 /* this must come first */
9 #include <asm/config-pre.h>
10
11 /*
12  * Processor Settings
13  */
14 #define CONFIG_BFIN_CPU       bf537-0.3
15 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
16
17 /*
18  * Clock Settings
19  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
20  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
21  */
22 #define CONFIG_CLKIN_HZ                 25000000
23 #define CONFIG_CLKIN_HALF               0
24 #define CONFIG_PLL_BYPASS               0
25 #define CONFIG_VCO_MULT                 24
26 #define CONFIG_CCLK_DIV                 1
27 #define CONFIG_SCLK_DIV                 5
28
29 /*
30  * Memory Settings
31  */
32 #define CONFIG_MEM_ADD_WDTH     9
33 #define CONFIG_MEM_SIZE         32
34
35 #define CONFIG_EBIU_SDRRC_VAL   0x03a0
36 #define CONFIG_EBIU_SDBCTL_VAL  0x0013
37 #define CONFIG_EBIU_SDGCTL_VAL  0x8091998d
38
39 #define CONFIG_EBIU_AMGCTL_VAL  0xF7
40 #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
41 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
42
43 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
44 #define CONFIG_SYS_MALLOC_LEN   (128 * 1024)
45
46 /*
47  * Network Settings
48  */
49 #ifndef __ADSPBF534__
50 #define CONFIG_ROOTPATH        "/romfs"
51
52 #define CONFIG_BFIN_MAC         1
53 #define CONFIG_PHY_ADDR         0
54 #define CONFIG_RMII             1
55
56 #define CONFIG_CMD_MII
57 #define CONFIG_CMD_PING
58 #endif
59
60 /*
61  * Flash Settings
62  *
63  * Only 3 MB of the 4 MB NOR flash are addressable.
64  * But limiting the flash size does not seem to work.
65  * It seems the CFI detection has precedence.
66  */
67 #define CONFIG_FLASH_CFI_DRIVER
68 #define CONFIG_SYS_FLASH_BASE       0x20000000
69 #define CONFIG_SYS_FLASH_CFI
70 #define CONFIG_SYS_FLASH_PROTECTION
71 #define CONFIG_SYS_MAX_FLASH_BANKS  1
72 #define CONFIG_SYS_MAX_FLASH_SECT   71 /* (M29W320EB) */
73
74 /* 512k reserved for u-boot */
75 #define CONFIG_SYS_JFFS2_FIRST_SECTOR 15
76
77 /*
78  * Env Storage Settings
79  */
80 #define CONFIG_ENV_IS_IN_FLASH     1
81 #define CONFIG_ENV_ADDR       0x20004000
82 #define CONFIG_ENV_SIZE       0x00002000
83 #define CONFIG_ENV_SECT_SIZE  0x00002000 /* Total Size of Environment Sector */
84 #define CONFIG_ENV_OFFSET     0x00004000 /* (CONFIG_ENV_ADDR - CONFIG_FLASH_BASE) */
85
86 #define ENV_IS_EMBEDDED
87 #define LDS_BOARD_TEXT \
88         arch/blackfin/lib/libblackfin.o (.text*); \
89         arch/blackfin/cpu/libblackfin.o (.text*); \
90         . = DEFINED(env_offset) ? env_offset : .; \
91         common/env_embedded.o (.text*);
92
93 /*
94  * Misc Settings
95  */
96 #define CONFIG_CMD_GPIO
97 #define CONFIG_CMD_STRINGS
98 #define CONFIG_MISC_INIT_R
99 #define CONFIG_RTC_BFIN
100 #define CONFIG_SYS_LONGHELP
101
102 /* This disables the hardware watchdog (not inside the bfin) */
103 #define CONFIG_DNP5370_EXT_WD_DISABLE 1
104
105 #define CONFIG_UART_CONSOLE 0
106 #define CONFIG_BAUDRATE     115200
107 #define CONFIG_BOOTCOMMAND  "bootm 0x20030000"
108 #define CONFIG_BOOTARGS     "console=ttyBF0,115200 root=/dev/mtdblock3 rootfstype=ext2"
109
110 /* Convenience commands to update Linux in NOR flash */
111 #define CONFIG_EXTRA_ENV_SETTINGS \
112         "fetchme=tftpboot 0x01000000 uImage;" \
113                 "iminfo\0" \
114         "flashme=protect off 0x20030000 0x2003ffff;" \
115                 "erase 0x20030000 0x202effff;" \
116                 "cp.b 0x01000000 0x20030000 0x2c0000\0" \
117         "runme=bootm 0x01000000\0"
118
119 /* this sets up the default list of enabled commands */
120 #include <config_cmd_default.h>
121
122 #ifndef CONFIG_BFIN_MAC
123 # undef CONFIG_CMD_NET
124 # undef CONFIG_CMD_NFS
125 #endif
126
127 #endif