include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_NAND_SUPPORT
  12 #define CONFIG_SPL_MMC_SUPPORT
  13 #define CONFIG_SPL_FAT_SUPPORT
  14 /*
  15 #define CONFIG_SPL_SATA_SUPPORT
  16 */
  17 /* Location in NAND to read U-Boot from */
  18 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
  19
  20 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  21 #include "mx6_common.h"
  22 #define CONFIG_MX6
  23 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  24 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  25
  26 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  27
  28 #include <asm/arch/imx-regs.h>
  29 #include <asm/imx-common/gpio.h>
  30
  31 /* ATAGs */
  32 #define CONFIG_CMDLINE_TAG
  33 #define CONFIG_SETUP_MEMORY_TAGS
  34 #define CONFIG_INITRD_TAG
  35 #define CONFIG_SERIAL_TAG
  36 #define CONFIG_REVISION_TAG
  37
  38 #define CONFIG_SYS_GENERIC_BOARD
  39
  40 /* Size of malloc() pool */
  41 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  42 #define CONFIG_SYS_MALLOC_F_LEN         (1 << 10)
  43
  44 /* Init Functions */
  45 #define CONFIG_BOARD_EARLY_INIT_F
  46 #define CONFIG_MISC_INIT_R
  47
  48 /* GPIO */
  49 #define CONFIG_MXC_GPIO
  50
  51 /* Serial */
  52 #define CONFIG_MXC_UART
  53 #define CONFIG_MXC_UART_BASE           UART2_BASE
  54
  55 #ifdef CONFIG_SPI_FLASH
  56
  57 /* SPI */
  58 #define CONFIG_CMD_SF
  59 #ifdef CONFIG_CMD_SF
  60   #define CONFIG_MXC_SPI
  61   #define CONFIG_SPI_FLASH_MTD
  62   #define CONFIG_SPI_FLASH_BAR
  63   #define CONFIG_SPI_FLASH_WINBOND
  64   #define CONFIG_SF_DEFAULT_BUS              0
  65   #define CONFIG_SF_DEFAULT_CS               0
  66                                              /* GPIO 3-19 (21248) */
  67   #define CONFIG_SF_DEFAULT_SPEED            30000000
  68   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  69 #endif
  70
  71 #else
  72 /* Enable NAND support */
  73 #define CONFIG_CMD_TIME
  74 #define CONFIG_CMD_NAND
  75 #define CONFIG_CMD_NAND_TRIMFFS
  76 #ifdef CONFIG_CMD_NAND
  77   #define CONFIG_NAND_MXS
  78   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  79   #define CONFIG_SYS_NAND_BASE          0x40000000
  80   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  81   #define CONFIG_SYS_NAND_ONFI_DETECTION
  82
  83   /* DMA stuff, needed for GPMI/MXS NAND support */
  84   #define CONFIG_APBH_DMA
  85   #define CONFIG_APBH_DMA_BURST
  86   #define CONFIG_APBH_DMA_BURST8
  87 #endif
  88
  89 #endif /* CONFIG_SPI_FLASH */
  90
  91 /* Flattened Image Tree Suport */
  92 #define CONFIG_FIT
  93 #define CONFIG_FIT_VERBOSE
  94
  95 /* I2C Configs */
  96 #define CONFIG_CMD_I2C
  97 #define CONFIG_SYS_I2C
  98 #define CONFIG_SYS_I2C_MXC
  99 #define CONFIG_SYS_I2C_SPEED            100000
 100 #define CONFIG_I2C_GSC                  0
 101 #define CONFIG_I2C_PMIC                 1
 102
 103 /* MMC Configs */
 104 #define CONFIG_FSL_ESDHC
 105 #define CONFIG_FSL_USDHC
 106 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 107 #define CONFIG_SYS_FSL_USDHC_NUM       1
 108 #define CONFIG_MMC
 109 #define CONFIG_CMD_MMC
 110 #define CONFIG_GENERIC_MMC
 111 #define CONFIG_BOUNCE_BUFFER
 112
 113 /* Filesystem support */
 114 #define CONFIG_CMD_EXT2
 115 #define CONFIG_CMD_FAT
 116 #define CONFIG_CMD_UBIFS
 117 #define CONFIG_DOS_PARTITION
 118
 119 /* Network config - Allow larger/faster download for TFTP/NFS */
 120 #define CONFIG_IP_DEFRAG
 121 #define CONFIG_TFTP_BLOCKSIZE 4096
 122 #define CONFIG_NFS_READ_SIZE  4096
 123
 124 /*
 125  * SATA Configs
 126  */
 127 #define CONFIG_CMD_SATA
 128 #ifdef CONFIG_CMD_SATA
 129   #define CONFIG_DWC_AHSATA
 130   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 131   #define CONFIG_DWC_AHSATA_PORT_ID     0
 132   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 133   #define CONFIG_LBA48
 134   #define CONFIG_LIBATA
 135 #endif
 136
 137 /*
 138  * PCI express
 139  */
 140 #define CONFIG_CMD_PCI
 141 #ifdef CONFIG_CMD_PCI
 142 #define CONFIG_PCI
 143 #define CONFIG_PCI_PNP
 144 #define CONFIG_PCI_SCAN_SHOW
 145 #define CONFIG_PCI_FIXUP_DEV
 146 #define CONFIG_PCIE_IMX
 147 #endif
 148
 149 /*
 150  * PMIC
 151  */
 152 #define CONFIG_POWER
 153 #define CONFIG_POWER_I2C
 154 #define CONFIG_POWER_PFUZE100
 155 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 156 #define CONFIG_POWER_LTC3676
 157 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 158
 159 /* Various command support */
 160 #include <config_cmd_default.h>
 161 #undef CONFIG_CMD_IMLS
 162 #define CONFIG_CMD_PING
 163 #define CONFIG_CMD_DHCP
 164 #define CONFIG_CMD_MII
 165 #define CONFIG_CMD_NET
 166 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 167 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 168 #define CONFIG_CMD_SETEXPR
 169 #define CONFIG_CMD_BOOTZ
 170 #define CONFIG_CMD_GSC
 171 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 172 #define CONFIG_CMD_UBI
 173 #define CONFIG_RBTREE
 174 #define CONFIG_LZO
 175 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 176 #ifdef CONFIG_CMD_FUSE
 177 #define CONFIG_MXC_OCOTP
 178 #endif
 179
 180
 181 /* Ethernet support */
 182 #define CONFIG_FEC_MXC
 183 #define CONFIG_MII
 184 #define IMX_FEC_BASE             ENET_BASE_ADDR
 185 #define CONFIG_FEC_XCV_TYPE      RGMII
 186 #define CONFIG_ETHPRIME          "FEC"
 187 #define CONFIG_FEC_MXC_PHYADDR   0
 188 #define CONFIG_PHYLIB
 189 #define CONFIG_ARP_TIMEOUT       200UL
 190
 191 /* USB Configs */
 192 #define CONFIG_CMD_USB
 193 #define CONFIG_USB_EHCI
 194 #define CONFIG_USB_EHCI_MX6
 195 #define CONFIG_USB_STORAGE
 196 #define CONFIG_USB_HOST_ETHER
 197 #define CONFIG_USB_ETHER_ASIX
 198 #define CONFIG_USB_ETHER_SMSC95XX
 199 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 200 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 201 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 202 #define CONFIG_MXC_USB_FLAGS      0
 203 #define CONFIG_USB_KEYBOARD
 204 #define CONFIG_CI_UDC
 205 #define CONFIG_USBD_HS
 206 #define CONFIG_USB_GADGET_DUALSPEED
 207 #define CONFIG_USB_ETHER
 208 #define CONFIG_USB_ETH_CDC
 209 #define CONFIG_NETCONSOLE
 210 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 211
 212 /* Framebuffer and LCD */
 213 #define CONFIG_VIDEO
 214 #define CONFIG_VIDEO_IPUV3
 215 #define CONFIG_CFB_CONSOLE
 216 #define CONFIG_VGA_AS_SINGLE_DEVICE
 217 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 218 #define CONFIG_VIDEO_BMP_RLE8
 219 #define CONFIG_SPLASH_SCREEN
 220 #define CONFIG_BMP_16BPP
 221 #define CONFIG_VIDEO_LOGO
 222 #define CONFIG_IPUV3_CLK          260000000
 223 #define CONFIG_CMD_HDMIDETECT
 224 #define CONFIG_CONSOLE_MUX
 225 #define CONFIG_IMX_HDMI
 226 #define CONFIG_IMX_VIDEO_SKIP
 227
 228 /* serial console (ttymxc1,115200) */
 229 #define CONFIG_CONS_INDEX              1
 230 #define CONFIG_BAUDRATE                115200
 231
 232 /* Miscellaneous configurable options */
 233 #define CONFIG_SYS_LONGHELP
 234 #define CONFIG_SYS_HUSH_PARSER
 235 #define CONFIG_SYS_PROMPT                    "Ventana > "
 236 #define CONFIG_SYS_CBSIZE                    1024
 237 #define CONFIG_AUTO_COMPLETE
 238 #define CONFIG_CMDLINE_EDITING
 239 #define CONFIG_HWCONFIG
 240
 241 /* Print Buffer Size */
 242 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 243 #define CONFIG_SYS_MAXARGS                 16
 244 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 245
 246 /* Memory configuration */
 247 #define CONFIG_SYS_MEMTEST_START       0x10000000
 248 #define CONFIG_SYS_MEMTEST_END         0x10010000
 249 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 250 #define CONFIG_SYS_TEXT_BASE             0x17800000
 251 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 252
 253 /* Physical Memory Map */
 254 #define CONFIG_NR_DRAM_BANKS           1
 255 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 256 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 257 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 258 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 259
 260 #define CONFIG_SYS_INIT_SP_OFFSET \
 261         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 262 #define CONFIG_SYS_INIT_SP_ADDR \
 263         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 264
 265 /* FLASH and environment organization */
 266 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 267
 268 /*
 269  * MTD Command for mtdparts
 270  */
 271 #define CONFIG_CMD_MTDPARTS
 272 #define CONFIG_MTD_DEVICE
 273 #define CONFIG_MTD_PARTITIONS
 274 #ifdef CONFIG_SPI_FLASH
 275 #define MTDIDS_DEFAULT    "nor0=nor"
 276 #define MTDPARTS_DEFAULT  \
 277         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 278 #else
 279 #define MTDIDS_DEFAULT    "nand0=nand"
 280 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 281 #endif
 282
 283 /* Persistent Environment Config */
 284 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 285 #ifdef CONFIG_SPI_FLASH
 286 #define CONFIG_ENV_IS_IN_SPI_FLASH
 287 #else
 288 #define CONFIG_ENV_IS_IN_NAND
 289 #endif
 290 #if defined(CONFIG_ENV_IS_IN_MMC)
 291   #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 292   #define CONFIG_ENV_SIZE                (8 * 1024)
 293   #define CONFIG_SYS_MMC_ENV_DEV         0
 294 #elif defined(CONFIG_ENV_IS_IN_NAND)
 295   #define CONFIG_ENV_OFFSET              (16 << 20)
 296   #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 297   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 298   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
 299   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 300 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 301   #define CONFIG_ENV_OFFSET              (512 * 1024)
 302   #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 303   #define CONFIG_ENV_SIZE                (8 * 1024)
 304   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 305   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 306   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 307   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 308 #endif
 309
 310 /* Environment */
 311 #define CONFIG_BOOTDELAY          3
 312 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 313 #define CONFIG_IPADDR             192.168.1.1
 314 #define CONFIG_SERVERIP           192.168.1.146
 315 #define HWCONFIG_DEFAULT \
 316         "hwconfig=rs232;" \
 317         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 318
 319 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 320         "console=ttymxc1\0" \
 321         "bootdevs=usb mmc sata flash\0" \
 322         HWCONFIG_DEFAULT \
 323         "video=\0" \
 324         \
 325         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 326         "mtdids=" MTDIDS_DEFAULT "\0" \
 327         \
 328         "fdt_high=0xffffffff\0" \
 329         "fdt_addr=0x18000000\0" \
 330         "loadfdt=" \
 331                 "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
 332                         "echo Loaded DTB from boot/${fdt_file}; " \
 333                 "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
 334                         "echo Loaded DTB from boot/${fdt_file1}; " \
 335                 "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
 336                                 "echo Loaded DTB from boot/${fdt_file2}; " \
 337                 "fi\0" \
 338         \
 339         "script=boot/6x_bootscript-ventana\0" \
 340         "loadscript=" \
 341                 "if ${fsload} ${loadaddr} ${script}; then " \
 342                         "source; " \
 343                 "fi\0" \
 344         \
 345         "uimage=boot/uImage\0" \
 346         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 347         "mmc_boot=" \
 348                 "setenv fsload 'ext2load mmc 0:1'; " \
 349                 "mmc dev 0 && mmc rescan && " \
 350                 "run loadscript; " \
 351                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 352                         "setenv bootargs console=${console},${baudrate} " \
 353                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 354                                 "rootwait rw ${video} ${extra}; " \
 355                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 356                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 357                         "else " \
 358                                 "bootm; " \
 359                         "fi; " \
 360                 "fi\0" \
 361         \
 362         "sata_boot=" \
 363                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 364                 "run loadscript; " \
 365                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 366                         "setenv bootargs console=${console},${baudrate} " \
 367                                 "root=/dev/sda1 rootfstype=ext4 " \
 368                                 "rootwait rw ${video} ${extra}; " \
 369                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 370                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 371                         "else " \
 372                                 "bootm; " \
 373                         "fi; " \
 374                 "fi\0" \
 375         "usb_boot=" \
 376                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 377                 "run loadscript; " \
 378                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 379                         "setenv bootargs console=${console},${baudrate} " \
 380                                 "root=/dev/sda1 rootfstype=ext4 " \
 381                                 "rootwait rw ${video} ${extra}; " \
 382                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 383                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 384                         "else " \
 385                                 "bootm; " \
 386                         "fi; " \
 387                 "fi\0"
 388
 389 #ifdef CONFIG_SPI_FLASH
 390         #define CONFIG_EXTRA_ENV_SETTINGS \
 391         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 392         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 393         "image_uboot=ventana/u-boot_spi.imx\0" \
 394         \
 395         "spi_koffset=0x90000\0" \
 396         "spi_klen=0x200000\0" \
 397         \
 398         "spi_updateuboot=echo Updating uboot from " \
 399                 "${serverip}:${image_uboot}...; " \
 400                 "tftpboot ${loadaddr} ${image_uboot} && " \
 401                 "sf probe && sf erase 0 80000 && " \
 402                         "sf write ${loadaddr} 400 ${filesize}\0" \
 403         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 404                 "to ${spi_koffset} ...; " \
 405                 "tftp ${loadaddr} ${image_os} && " \
 406                 "sf probe && " \
 407                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 408         \
 409         "flash_boot=" \
 410                 "if sf probe && " \
 411                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 412                         "setenv bootargs console=${console},${baudrate} " \
 413                                 "root=/dev/mtdblock3 " \
 414                                 "rootfstype=squashfs,jffs2 " \
 415                                 "${video} ${extra}; " \
 416                         "bootm; " \
 417                 "fi\0"
 418 #else
 419         #define CONFIG_EXTRA_ENV_SETTINGS \
 420         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 421         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 422         \
 423         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 424                 "tftp ${loadaddr} ${image_rootfs} && " \
 425                 "nand erase.part rootfs && " \
 426                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 427         \
 428         "flash_boot=" \
 429                 "setenv fsload 'ubifsload'; " \
 430                 "ubi part rootfs && ubifsmount ubi0:rootfs; " \
 431                 "run loadscript; " \
 432                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 433                         "setenv bootargs console=${console},${baudrate} " \
 434                                 "root=ubi0:rootfs ubi.mtd=2 " \
 435                                 "rootfstype=ubifs ${video} ${extra}; " \
 436                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 437                                 "ubifsumount; " \
 438                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 439                         "else " \
 440                                 "ubifsumount; bootm; " \
 441                         "fi; " \
 442                 "fi\0"
 443 #endif
 444
 445 #define CONFIG_BOOTCOMMAND \
 446         "for btype in ${bootdevs}; do " \
 447                 "echo; echo Attempting ${btype} boot...; " \
 448                 "if run ${btype}_boot; then; fi; " \
 449         "done"
 450
 451 /* Device Tree Support */
 452 #define CONFIG_OF_BOARD_SETUP
 453 #define CONFIG_OF_LIBFDT
 454 #define CONFIG_FDT_FIXUP_PARTITIONS
 455
 456 #ifndef CONFIG_SYS_DCACHE_OFF
 457   #define CONFIG_CMD_CACHE
 458 #endif
 459
 460 #endif                         /* __CONFIG_H */