include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 #define CONFIG_SPL_NAND_SUPPORT
  13 #define CONFIG_SPL_MMC_SUPPORT
  14 #define CONFIG_SPL_POWER_SUPPORT
  15 /* Location in NAND to read U-Boot from */
  16 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  17
  18 /* Falcon Mode */
  19 #define CONFIG_CMD_SPL
  20 #define CONFIG_SPL_OS_BOOT
  21 #define CONFIG_SPL_ENV_SUPPORT
  22 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  23 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  24
  25 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  26 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  27 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  28
  29 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  30 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  31 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  32 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  33
  34 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  35 #include "mx6_common.h"
  36
  37 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  38
  39 /* Serial ATAG */
  40 #define CONFIG_SERIAL_TAG
  41
  42 /* Size of malloc() pool */
  43 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  44
  45 /* Init Functions */
  46 #define CONFIG_BOARD_EARLY_INIT_F
  47 #define CONFIG_MISC_INIT_R
  48
  49 /* Driver Model */
  50 #ifndef CONFIG_SPL_BUILD
  51 #define CONFIG_DM
  52 #define CONFIG_DM_GPIO
  53 #define CONFIG_DM_SERIAL
  54 #define CONFIG_DM_THERMAL
  55 #define CONFIG_CMD_DM
  56 #endif
  57
  58 /* GPIO */
  59 #define CONFIG_MXC_GPIO
  60 #define CONFIG_CMD_GPIO
  61
  62 /* Thermal */
  63 #define CONFIG_IMX6_THERMAL
  64
  65 /* Serial */
  66 #define CONFIG_MXC_UART
  67 #define CONFIG_MXC_UART_BASE           UART2_BASE
  68
  69 #ifdef CONFIG_SPI_FLASH
  70
  71 /* SPI */
  72 #define CONFIG_CMD_SF
  73 #ifdef CONFIG_CMD_SF
  74   #define CONFIG_MXC_SPI
  75   #define CONFIG_SPI_FLASH_MTD
  76   #define CONFIG_SPI_FLASH_BAR
  77   #define CONFIG_SPI_FLASH_WINBOND
  78   #define CONFIG_SF_DEFAULT_BUS              0
  79   #define CONFIG_SF_DEFAULT_CS               0
  80                                              /* GPIO 3-19 (21248) */
  81   #define CONFIG_SF_DEFAULT_SPEED            30000000
  82   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  83 #endif
  84
  85 #else
  86 /* Enable NAND support */
  87 #define CONFIG_CMD_TIME
  88 #define CONFIG_CMD_NAND
  89 #define CONFIG_CMD_NAND_TRIMFFS
  90 #ifdef CONFIG_CMD_NAND
  91   #define CONFIG_NAND_MXS
  92   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  93   #define CONFIG_SYS_NAND_BASE          0x40000000
  94   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  95   #define CONFIG_SYS_NAND_ONFI_DETECTION
  96
  97   /* DMA stuff, needed for GPMI/MXS NAND support */
  98   #define CONFIG_APBH_DMA
  99   #define CONFIG_APBH_DMA_BURST
 100   #define CONFIG_APBH_DMA_BURST8
 101 #endif
 102
 103 #endif /* CONFIG_SPI_FLASH */
 104
 105 /* Flattened Image Tree Suport */
 106 #define CONFIG_FIT
 107 #define CONFIG_FIT_VERBOSE
 108
 109 /* I2C Configs */
 110 #define CONFIG_CMD_I2C
 111 #define CONFIG_SYS_I2C
 112 #define CONFIG_SYS_I2C_MXC
 113 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 114 #define CONFIG_SYS_I2C_SPEED            100000
 115 #define CONFIG_I2C_GSC                  0
 116 #define CONFIG_I2C_PMIC                 1
 117 #define CONFIG_I2C_EDID
 118
 119 /* MMC Configs */
 120 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 121 #define CONFIG_SYS_FSL_USDHC_NUM       1
 122
 123 /* Filesystem support */
 124 #define CONFIG_CMD_UBIFS
 125
 126 /*
 127  * SATA Configs
 128  */
 129 #define CONFIG_CMD_SATA
 130 #ifdef CONFIG_CMD_SATA
 131   #define CONFIG_DWC_AHSATA
 132   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 133   #define CONFIG_DWC_AHSATA_PORT_ID     0
 134   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 135   #define CONFIG_LBA48
 136   #define CONFIG_LIBATA
 137 #endif
 138
 139 /*
 140  * PCI express
 141  */
 142 #define CONFIG_CMD_PCI
 143 #ifdef CONFIG_CMD_PCI
 144 #define CONFIG_PCI
 145 #define CONFIG_PCI_PNP
 146 #define CONFIG_PCI_SCAN_SHOW
 147 #define CONFIG_PCI_FIXUP_DEV
 148 #define CONFIG_PCIE_IMX
 149 #endif
 150
 151 /*
 152  * PMIC
 153  */
 154 #define CONFIG_POWER
 155 #define CONFIG_POWER_I2C
 156 #define CONFIG_POWER_PFUZE100
 157 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 158 #define CONFIG_POWER_LTC3676
 159 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 160
 161 /* Various command support */
 162 #define CONFIG_CMD_PING
 163 #define CONFIG_CMD_DHCP
 164 #define CONFIG_CMD_MII
 165 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 166 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 167 #define CONFIG_CMD_GSC
 168 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 169 #define CONFIG_CMD_UBI
 170 #define CONFIG_RBTREE
 171 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 172 #ifdef CONFIG_CMD_FUSE
 173 #define CONFIG_MXC_OCOTP
 174 #endif
 175
 176
 177 /* Ethernet support */
 178 #define CONFIG_FEC_MXC
 179 #define CONFIG_E1000
 180 #define CONFIG_MII
 181 #define IMX_FEC_BASE             ENET_BASE_ADDR
 182 #define CONFIG_FEC_XCV_TYPE      RGMII
 183 #define CONFIG_FEC_MXC_PHYADDR   0
 184 #define CONFIG_PHYLIB
 185 #define CONFIG_ARP_TIMEOUT       200UL
 186
 187 /* USB Configs */
 188 #define CONFIG_CMD_USB
 189 #define CONFIG_USB_EHCI
 190 #define CONFIG_USB_EHCI_MX6
 191 #define CONFIG_USB_STORAGE
 192 #define CONFIG_USB_HOST_ETHER
 193 #define CONFIG_USB_ETHER_ASIX
 194 #define CONFIG_USB_ETHER_SMSC95XX
 195 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 196 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 197 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 198 #define CONFIG_MXC_USB_FLAGS      0
 199 #define CONFIG_USB_KEYBOARD
 200 #define CONFIG_CI_UDC
 201 #define CONFIG_USBD_HS
 202 #define CONFIG_USB_GADGET_DUALSPEED
 203 #define CONFIG_USB_ETHER
 204 #define CONFIG_USB_ETH_CDC
 205 #define CONFIG_NETCONSOLE
 206 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 207
 208 /* USB Mass Storage Gadget */
 209 #define CONFIG_USB_GADGET
 210 #define CONFIG_CMD_USB_MASS_STORAGE
 211 #define CONFIG_USB_GADGET_MASS_STORAGE
 212 #define CONFIG_USBDOWNLOAD_GADGET
 213 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 214
 215 /* Netchip IDs */
 216 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 217 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 218 #define CONFIG_G_DNL_MANUFACTURER "Gateworks"
 219
 220 /* Framebuffer and LCD */
 221 #define CONFIG_VIDEO
 222 #define CONFIG_VIDEO_IPUV3
 223 #define CONFIG_CFB_CONSOLE
 224 #define CONFIG_VGA_AS_SINGLE_DEVICE
 225 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 226 #define CONFIG_VIDEO_BMP_RLE8
 227 #define CONFIG_SPLASH_SCREEN
 228 #define CONFIG_BMP_16BPP
 229 #define CONFIG_VIDEO_LOGO
 230 #define CONFIG_IPUV3_CLK          260000000
 231 #define CONFIG_CMD_HDMIDETECT
 232 #define CONFIG_CONSOLE_MUX
 233 #define CONFIG_IMX_HDMI
 234 #define CONFIG_IMX_VIDEO_SKIP
 235
 236 /* Miscellaneous configurable options */
 237 #define CONFIG_SYS_PROMPT                    "Ventana > "
 238 #define CONFIG_HWCONFIG
 239
 240 /* Print Buffer Size */
 241 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 242
 243 /* Memory configuration */
 244 #define CONFIG_SYS_MEMTEST_START       0x10000000
 245 #define CONFIG_SYS_MEMTEST_END         0x10010000
 246 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 247
 248 /* Physical Memory Map */
 249 #define CONFIG_NR_DRAM_BANKS           1
 250 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 251 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 252 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 253 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 254
 255 #define CONFIG_SYS_INIT_SP_OFFSET \
 256         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 257 #define CONFIG_SYS_INIT_SP_ADDR \
 258         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 259
 260 /*
 261  * MTD Command for mtdparts
 262  */
 263 #define CONFIG_LZO
 264 #define CONFIG_CMD_MTDPARTS
 265 #define CONFIG_MTD_DEVICE
 266 #define CONFIG_MTD_PARTITIONS
 267 #ifdef CONFIG_SPI_FLASH
 268 #define MTDIDS_DEFAULT    "nor0=nor"
 269 #define MTDPARTS_DEFAULT  \
 270         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 271 #else
 272 #define MTDIDS_DEFAULT    "nand0=nand"
 273 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 274 #endif
 275
 276 /* Persistent Environment Config */
 277 #ifdef CONFIG_SPI_FLASH
 278 #define CONFIG_ENV_IS_IN_SPI_FLASH
 279 #else
 280 #define CONFIG_ENV_IS_IN_NAND
 281 #endif
 282 #if defined(CONFIG_ENV_IS_IN_MMC)
 283   #define CONFIG_SYS_MMC_ENV_DEV         0
 284   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 285   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 286   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 287 #elif defined(CONFIG_ENV_IS_IN_NAND)
 288   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 289   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 290   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 291   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 292   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 293 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 294   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 295   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 296   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 297   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 298   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 299   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 300   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 301 #endif
 302
 303 /* Environment */
 304 #define CONFIG_IPADDR             192.168.1.1
 305 #define CONFIG_SERVERIP           192.168.1.146
 306 #define HWCONFIG_DEFAULT \
 307         "hwconfig=rs232;" \
 308         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 309
 310 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 311         "usb_pgood_delay=2000\0" \
 312         "console=ttymxc1\0" \
 313         "bootdevs=usb mmc sata flash\0" \
 314         HWCONFIG_DEFAULT \
 315         "video=\0" \
 316         \
 317         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 318         "mtdids=" MTDIDS_DEFAULT "\0" \
 319         \
 320         "fdt_high=0xffffffff\0" \
 321         "fdt_addr=0x18000000\0" \
 322         "initrd_high=0xffffffff\0" \
 323         "bootdir=boot\0" \
 324         "loadfdt=" \
 325                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 326                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 327                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 328                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 329                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 330                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 331                 "fi\0" \
 332         \
 333         "script=6x_bootscript-ventana\0" \
 334         "loadscript=" \
 335                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 336                         "source; " \
 337                 "fi\0" \
 338         \
 339         "uimage=uImage\0" \
 340         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 341         "mmc_boot=" \
 342                 "setenv fsload 'ext2load mmc 0:1'; " \
 343                 "mmc dev 0 && mmc rescan && " \
 344                 "setenv dtype mmc; run loadscript; " \
 345                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 346                         "setenv bootargs console=${console},${baudrate} " \
 347                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 348                                 "rootwait rw ${video} ${extra}; " \
 349                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 350                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 351                         "else " \
 352                                 "bootm; " \
 353                         "fi; " \
 354                 "fi\0" \
 355         \
 356         "sata_boot=" \
 357                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 358                 "setenv dtype sata; run loadscript; " \
 359                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 360                         "setenv bootargs console=${console},${baudrate} " \
 361                                 "root=/dev/sda1 rootfstype=ext4 " \
 362                                 "rootwait rw ${video} ${extra}; " \
 363                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 364                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 365                         "else " \
 366                                 "bootm; " \
 367                         "fi; " \
 368                 "fi\0" \
 369         "usb_boot=" \
 370                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 371                 "setenv dtype usb; run loadscript; " \
 372                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 373                         "setenv bootargs console=${console},${baudrate} " \
 374                                 "root=/dev/sda1 rootfstype=ext4 " \
 375                                 "rootwait rw ${video} ${extra}; " \
 376                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 377                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 378                         "else " \
 379                                 "bootm; " \
 380                         "fi; " \
 381                 "fi\0"
 382
 383 #ifdef CONFIG_SPI_FLASH
 384         #define CONFIG_EXTRA_ENV_SETTINGS \
 385         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 386         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 387         "image_uboot=ventana/u-boot_spi.imx\0" \
 388         \
 389         "spi_koffset=0x90000\0" \
 390         "spi_klen=0x200000\0" \
 391         \
 392         "spi_updateuboot=echo Updating uboot from " \
 393                 "${serverip}:${image_uboot}...; " \
 394                 "tftpboot ${loadaddr} ${image_uboot} && " \
 395                 "sf probe && sf erase 0 80000 && " \
 396                         "sf write ${loadaddr} 400 ${filesize}\0" \
 397         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 398                 "to ${spi_koffset} ...; " \
 399                 "tftp ${loadaddr} ${image_os} && " \
 400                 "sf probe && " \
 401                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 402         \
 403         "flash_boot=" \
 404                 "if sf probe && " \
 405                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 406                         "setenv bootargs console=${console},${baudrate} " \
 407                                 "root=/dev/mtdblock3 " \
 408                                 "rootfstype=squashfs,jffs2 " \
 409                                 "${video} ${extra}; " \
 410                         "bootm; " \
 411                 "fi\0"
 412 #else
 413         #define CONFIG_EXTRA_ENV_SETTINGS \
 414         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 415         \
 416         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 417         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 418                 "tftp ${loadaddr} ${image_rootfs} && " \
 419                 "nand erase.part rootfs && " \
 420                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 421         \
 422         "flash_boot=" \
 423                 "setenv fsload 'ubifsload'; " \
 424                 "ubi part rootfs; " \
 425                 "if ubi check boot; then " \
 426                         "ubifsmount ubi0:boot; " \
 427                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 428                                 "rootfstype=squashfs,ubifs; " \
 429                         "setenv bootdir; " \
 430                 "elif ubi check rootfs; then " \
 431                         "ubifsmount ubi0:rootfs; " \
 432                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 433                                 "rootfstype=ubifs; " \
 434                 "fi; " \
 435                 "setenv dtype nand; run loadscript; " \
 436                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 437                         "setenv bootargs console=${console},${baudrate} " \
 438                                 "root=${root} ${video} ${extra}; " \
 439                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 440                                 "ubifsumount; " \
 441                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 442                         "else " \
 443                                 "ubifsumount; bootm; " \
 444                         "fi; " \
 445                 "fi\0"
 446 #endif
 447
 448 #define CONFIG_BOOTCOMMAND \
 449         "for btype in ${bootdevs}; do " \
 450                 "echo; echo Attempting ${btype} boot...; " \
 451                 "if run ${btype}_boot; then; fi; " \
 452         "done"
 453
 454 /* Device Tree Support */
 455 #define CONFIG_OF_BOARD_SETUP
 456 #define CONFIG_FDT_FIXUP_PARTITIONS
 457
 458 #endif                         /* __CONFIG_H */