]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/integratorcp.h
karo: tx6: enable GPT command
[karo-tx-uboot.git] / include / configs / integratorcp.h
1 /*
2  * (C) Copyright 2003
3  * Texas Instruments.
4  * Kshitij Gupta <kshitij@ti.com>
5  * Configuation settings for the TI OMAP Innovator board.
6  *
7  * (C) Copyright 2004
8  * ARM Ltd.
9  * Philippe Robin, <philippe.robin@arm.com>
10  * Configuration for Compact Integrator board.
11  *
12  * SPDX-License-Identifier:     GPL-2.0+
13  */
14
15 #ifndef __CONFIG_H
16 #define __CONFIG_H
17
18 #include "integrator-common.h"
19
20 /* Integrator CP-specific configuration */
21 #define CONFIG_SYS_HZ_CLOCK             1000000 /* Timer 1 is clocked at 1Mhz */
22
23 /*
24  * Hardware drivers
25  */
26 #define CONFIG_SMC91111
27 #define CONFIG_SMC_USE_32_BIT
28 #define CONFIG_SMC91111_BASE    0xC8000000
29 #undef CONFIG_SMC91111_EXT_PHY
30
31 /*
32  * Command line configuration.
33  */
34 #define CONFIG_BOOTDELAY        2
35 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
36 #define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
37 #define CONFIG_SERVERIP 192.168.1.100
38 #define CONFIG_IPADDR 192.168.1.104
39 #define CONFIG_BOOTFILE "uImage"
40
41 /*
42  * Miscellaneous configurable options
43  */
44 #define PHYS_FLASH_SIZE                 0x01000000      /* 16MB */
45 #define CONFIG_SYS_MAX_FLASH_SECT       64
46 #define CONFIG_ENV_IS_IN_FLASH  1
47 #define CONFIG_SYS_MONITOR_LEN          0x00100000
48
49 /*
50  * Move up the U-Boot & monitor area if more flash is fitted.
51  * If this U-Boot is to be run on Integrators with varying flash sizes,
52  * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
53  * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
54  * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
55  * embedded in the boot monitor(s) area
56  */
57 #if ( PHYS_FLASH_SIZE == 0x04000000 )
58
59 #define CONFIG_ENV_ADDR         0x27F00000
60 #define CONFIG_SYS_MONITOR_BASE 0x27F40000
61
62 #elif (PHYS_FLASH_SIZE == 0x02000000 )
63
64 #define CONFIG_ENV_ADDR         0x25F00000
65 #define CONFIG_SYS_MONITOR_BASE 0x25F40000
66
67 #else
68
69 #define CONFIG_ENV_ADDR         0x24F00000
70 #define CONFIG_SYS_MONITOR_BASE 0x27F40000
71
72 #endif
73
74 #define CONFIG_ENV_SECT_SIZE    0x40000         /* 256KB */
75 #define CONFIG_ENV_SIZE         8192            /* 8KB */
76
77 #endif /* __CONFIG_H */