include/configs/lsxl.h

   1 /*
   2  * Copyright (c) 2012 Michael Walle
   3  * Michael Walle <michael@walle.cc>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _CONFIG_LSXL_H
   9 #define _CONFIG_LSXL_H
  10
  11 /*
  12  * Version number information
  13  */
  14 #if defined(CONFIG_LSCHLV2)
  15 #define CONFIG_IDENT_STRING " LS-CHLv2"
  16 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
  17 #define CONFIG_MACH_TYPE 3006
  18 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
  19 #elif defined(CONFIG_LSXHL)
  20 #define CONFIG_IDENT_STRING " LS-XHL"
  21 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
  22 #define CONFIG_MACH_TYPE 2663
  23 /* CONFIG_SYS_TCLK is 200000000 by default */
  24 #else
  25 #error "unknown board"
  26 #endif
  27
  28 /*
  29  * General configuration options
  30  */
  31 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  32 #define CONFIG_KIRKWOOD                 /* SOC Family Name */
  33 #define CONFIG_KW88F6281                /* SOC Name */
  34
  35 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  36 #define CONFIG_MISC_INIT_R
  37 #define CONFIG_SHOW_BOOT_PROGRESS
  38
  39 #define CONFIG_RANDOM_MACADDR
  40 #define CONFIG_LIB_RAND
  41 #define CONFIG_KIRKWOOD_GPIO
  42 #define CONFIG_OF_LIBFDT
  43
  44 #define CONFIG_SYS_NO_FLASH
  45 #define CONFIG_SYS_HUSH_PARSER
  46 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  47 #define CONFIG_SYS_CONSOLE_INFO_QUIET
  48
  49 /*
  50  * Enable u-boot API for standalone programs.
  51  */
  52 #define CONFIG_API
  53
  54 /*
  55  * Commands configuration
  56  */
  57 #include <config_cmd_default.h>
  58 #define CONFIG_CMD_DHCP
  59 #define CONFIG_CMD_ELF
  60 #define CONFIG_CMD_ENV
  61 #define CONFIG_CMD_EXT2
  62 #define CONFIG_CMD_FAT
  63 #define CONFIG_CMD_IDE
  64 #define CONFIG_CMD_PING
  65 #define CONFIG_CMD_PING
  66 #define CONFIG_CMD_SF
  67 #define CONFIG_CMD_SPI
  68 #define CONFIG_CMD_USB
  69
  70 #define CONFIG_DOS_PARTITION
  71 #define CONFIG_EFI_PARTITION
  72
  73 /*
  74  * mv-common.h should be defined after CMD configs since it used them
  75  * to enable certain macros
  76  */
  77 #include "mv-common.h"
  78
  79 /* ST M25P40 */
  80 #undef CONFIG_SPI_FLASH_MACRONIX
  81 #define CONFIG_SPI_FLASH_STMICRO
  82 #undef CONFIG_ENV_SPI_MAX_HZ
  83 #define CONFIG_ENV_SPI_MAX_HZ           25000000
  84 #undef CONFIG_SF_DEFAULT_SPEED
  85 #define CONFIG_SF_DEFAULT_SPEED         25000000
  86
  87
  88 #undef CONFIG_SYS_PROMPT
  89 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
  90
  91 /*
  92  *  Environment variables configurations
  93  */
  94 #ifdef CONFIG_SPI_FLASH
  95 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  96 #define CONFIG_SYS_MAX_FLASH_SECT       8
  97 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
  98 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64K */
  99 #else
 100 #define CONFIG_ENV_IS_NOWHERE
 101 #endif
 102
 103 #define CONFIG_ENV_SIZE                 0x10000 /* 64k */
 104 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
 105
 106 /*
 107  * Default environment variables
 108  */
 109 #define CONFIG_LOADADDR         0x00800000
 110 #define CONFIG_BOOTCOMMAND      "run bootcmd_${bootsource}"
 111 #define CONFIG_BOOTARGS         "console=ttyS0,115200 root=/dev/sda2"
 112 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 113         "bootsource=hdd\0"                                              \
 114         "hdpart=0:1\0"                                                  \
 115         "bootcmd_net=bootp 0x00100000 uImage "                          \
 116                 "&& tftpboot 0x00800000 uInitrd "                       \
 117                 "&& bootm 0x00100000 0x00800000\0"                      \
 118         "bootcmd_hdd=ide reset "                                        \
 119                 "&& ext2load ide ${hdpart} 0x00100000 /uImage "         \
 120                 "&& ext2load ide ${hdpart} 0x00800000 /uInitrd "        \
 121                 "&& bootm 0x00100000 0x00800000\0"                      \
 122         "bootcmd_usb=usb start "                                        \
 123                 "&& fatload usb 0:1 0x00100000 /uImage "                \
 124                 "&& fatload usb 0:1 0x00800000 /uInitrd "               \
 125                 "&& bootm 0x00100000 0x00800000\0"                      \
 126         "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
 127         "eraseenv=sf probe 0 "                                          \
 128                 "&& sf erase " __stringify(CONFIG_ENV_OFFSET)           \
 129                         " +" __stringify(CONFIG_ENV_SIZE) "\0"          \
 130         "config_nc_dhcp=setenv autoload_old ${autoload}; "              \
 131                 "setenv autoload no "                                   \
 132                 "&& bootp "                                             \
 133                 "&& setenv ncip "                                       \
 134                 "&& setenv autoload ${autoload_old}; "                  \
 135                 "setenv autoload_old\0"                                 \
 136         "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
 137                 "setenv ncip; setenv gatewayip; setenv ethact; "        \
 138                 "setenv bootfile; setenv dnsip; "                       \
 139                 "setenv bootsource hdd; run ser\0"                      \
 140         "restore_env=run standard_env; saveenv; reset\0"                \
 141         "ser=setenv stdin serial; setenv stdout serial; "               \
 142                 "setenv stderr serial\0"                                \
 143         "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"      \
 144         "stdin=serial\0"                                                \
 145         "stdout=serial\0"                                               \
 146         "stderr=serial\0"
 147
 148 /*
 149  * Ethernet Driver configuration
 150  */
 151 #ifdef CONFIG_CMD_NET
 152 #define CONFIG_MVGBE_PORTS              {0, 1} /* enable port 1 only */
 153 #define CONFIG_PHY_BASE_ADR             7
 154 #undef CONFIG_RESET_PHY_R
 155 #endif /* CONFIG_CMD_NET */
 156
 157 #ifdef CONFIG_CMD_IDE
 158 #undef CONFIG_IDE_LED
 159 #undef CONFIG_SYS_IDE_MAXBUS
 160 #define CONFIG_SYS_IDE_MAXBUS           1
 161 #undef CONFIG_SYS_IDE_MAXDEVICE
 162 #define CONFIG_SYS_IDE_MAXDEVICE        1
 163 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 164 #endif
 165
 166 #endif /* _CONFIG_LSXL_H */