include/configs/muas3001.h

   1 /*
   2  * (C) Copyright 2008
   3  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 /*
  12  * High Level Configuration Options
  13  * (easy to change)
  14  */
  15
  16 #define CONFIG_MUAS3001         1
  17
  18 #define CONFIG_SYS_TEXT_BASE    0xFF000000
  19
  20 #define CONFIG_CPM2             1       /* Has a CPM2 */
  21
  22 /* Do boardspecific init */
  23 #define CONFIG_BOARD_EARLY_INIT_R       1
  24
  25 /* enable Watchdog */
  26 #define CONFIG_WATCHDOG         1
  27
  28 /*
  29  * Select serial console configuration
  30  *
  31  * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  32  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  33  * for SCC).
  34  */
  35 #define CONFIG_CONS_ON_SMC              /* Console is on SMC         */
  36 #undef  CONFIG_CONS_ON_SCC              /* It's not on SCC           */
  37 #undef  CONFIG_CONS_NONE                /* It's not on external UART */
  38 #if defined(CONFIG_MUAS_DEV_BOARD)
  39 #define CONFIG_CONS_INDEX       2       /* SMC2 is used for console  */
  40 #else
  41 #define CONFIG_CONS_INDEX       1       /* SMC1 is used for console  */
  42 #endif
  43
  44 /*
  45  * Select ethernet configuration
  46  *
  47  * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
  48  * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
  49  * SCC, 1-3 for FCC)
  50  *
  51  * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
  52  * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
  53  * must be unset.
  54  */
  55 #undef  CONFIG_ETHER_ON_SCC             /* Ethernet is not on SCC */
  56 #define CONFIG_ETHER_ON_FCC             /* Ethernet is on FCC     */
  57 #undef  CONFIG_ETHER_NONE               /* No external Ethernet   */
  58
  59 #define CONFIG_ETHER_INDEX      1
  60 #define CONFIG_ETHER_ON_FCC1
  61 #define CONFIG_HAS_ETH0
  62 #define FCC_ENET
  63
  64 /*
  65  * - Rx-CLK is CLK11
  66  * - Tx-CLK is CLK12
  67  */
  68 # define CONFIG_SYS_CMXFCR_VALUE1       (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
  69 # define CONFIG_SYS_CMXFCR_MASK1        (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
  70 /*
  71  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  72  */
  73 # define CONFIG_SYS_CPMFCR_RAMTYPE      (0)
  74 /* know on local Bus */
  75 /* define CONFIG_SYS_CPMFCR_RAMTYPE     (CPMFCR_DTB | CPMFCR_BDB) */
  76 /*
  77  * - Enable Full Duplex in FSMR
  78  */
  79 # define CONFIG_SYS_FCC_PSMR            (FCC_PSMR_FDE|FCC_PSMR_LPB)
  80
  81 #define CONFIG_MII                      /* MII PHY management           */
  82 #define CONFIG_BITBANGMII               /* bit-bang MII PHY management  */
  83 # define CONFIG_SYS_PHY_ADDR            1
  84 /*
  85  * GPIO pins used for bit-banged MII communications
  86  */
  87 #define MDIO_PORT       0               /* Port A */
  88 #define MDIO_DECLARE    volatile ioport_t *iop = ioport_addr ( \
  89                                 (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
  90 #define MDC_DECLARE     MDIO_DECLARE
  91
  92
  93 #define CONFIG_SYS_MDIO_PIN     0x00200000      /* PA10 */
  94 #define CONFIG_SYS_MDC_PIN      0x00400000      /* PA9  */
  95
  96 #define MDIO_ACTIVE     (iop->pdir |=  CONFIG_SYS_MDIO_PIN)
  97 #define MDIO_TRISTATE   (iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
  98 #define MDIO_READ       ((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
  99
 100 #define MDIO(bit)       if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
 101                         else    iop->pdat &= ~CONFIG_SYS_MDIO_PIN
 102
 103 #define MDC(bit)        if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
 104                         else    iop->pdat &= ~CONFIG_SYS_MDC_PIN
 105
 106 #define MIIDELAY        udelay(1)
 107
 108 #ifndef CONFIG_8260_CLKIN
 109 #define CONFIG_8260_CLKIN       66000000        /* in Hz */
 110 #endif
 111
 112 #define CONFIG_BAUDRATE         115200
 113
 114 /*
 115  * Command line configuration.
 116  */
 117 #include <config_cmd_default.h>
 118
 119 #define CONFIG_CMD_DTT
 120 #define CONFIG_CMD_ECHO
 121 #define CONFIG_CMD_IMMAP
 122 #define CONFIG_CMD_MII
 123 #define CONFIG_CMD_PING
 124 #define CONFIG_CMD_I2C
 125
 126 /*
 127  * Default environment settings
 128  */
 129 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
 130         "netdev=eth0\0"                                                         \
 131         "u-boot_addr_r=100000\0"                                                \
 132         "kernel_addr_r=200000\0"                                                \
 133         "fdt_addr_r=400000\0"                                                   \
 134         "rootpath=/opt/eldk/ppc_6xx\0"                                          \
 135         "u-boot=muas3001/u-boot.bin\0"                                          \
 136         "bootfile=muas3001/uImage\0"                                            \
 137         "fdt_file=muas3001/muas3001.dtb\0"                                      \
 138         "ramdisk_file=uRamdisk\0"                                               \
 139         "load=tftp ${u-boot_addr_r} ${u-boot}\0"                                \
 140         "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; "            \
 141                 "cp.b ${u-boot_addr_r} ff000000 ${filesize};"                   \
 142                 "prot on ff000000 ff03ffff\0"                                   \
 143         "ramargs=setenv bootargs root=/dev/ram rw\0"                            \
 144         "nfsargs=setenv bootargs root=/dev/nfs rw "                             \
 145                 "nfsroot=${serverip}:${rootpath}\0"                             \
 146         "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0"     \
 147         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"                      \
 148         "addip=setenv bootargs ${bootargs} "                                    \
 149                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                        \
 150                 "${netmask}:${hostname}:${netdev}:off panic=1\0"                \
 151         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                           \
 152                 "tftp ${fdt_addr_r} ${fdt_file}; run nfsargs addip addcons;"    \
 153                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"                      \
 154         "net_self=tftp ${kernel_addr_r} ${bootfile}; "                          \
 155                 "tftp ${fdt_addr_r} ${fdt_file}; "                              \
 156                 "tftp ${ramdisk_addr} ${ramdisk_file}; "                        \
 157                 "run ramargs addip; "                                           \
 158                 "bootm ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r}\0"        \
 159         "ramdisk_addr=ff210000\0"                                               \
 160         "kernel_addr=ff050000\0"                                                \
 161         "fdt_addr=ff200000\0"                                                   \
 162         "flash_self=run ramargs addip addcons;bootm ${kernel_addr}"             \
 163         " ${ramdisk_addr} ${fdt_addr}\0"                                        \
 164         "updateramdisk=era ${ramdisk_addr} +1f0000;tftpb ${kernel_addr_r}"      \
 165         " ${ramdisk_file};"                                                     \
 166         "cp.b ${kernel_addr_r} ${ramdisk_addr} ${filesize}\0"                   \
 167         "updatekernel=era ${kernel_addr} +1b0000;tftpb ${kernel_addr_r}"        \
 168         " ${bootfile};"                                                         \
 169         "cp.b ${kernel_addr_r} ${kernel_addr} ${filesize}\0"                    \
 170         "updatefdt=era ${fdt_addr} +10000;tftpb ${fdt_addr_r} ${fdt_file};"     \
 171         "cp.b ${fdt_addr_r} ${fdt_addr} ${filesize}\0"                          \
 172         ""
 173
 174 #define CONFIG_BOOTCOMMAND      "run net_nfs"
 175 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
 176
 177 /*
 178  * Miscellaneous configurable options
 179  */
 180 #define CONFIG_SYS_HUSH_PARSER
 181 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 182 #if defined(CONFIG_CMD_KGDB)
 183 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
 184 #else
 185 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
 186 #endif
 187 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size  */
 188 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
 189 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size  */
 190
 191 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 192 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1 ... 15 MB in DRAM  */
 193
 194 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 195
 196 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
 197
 198 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 199 #define CONFIG_SYS_FLASH_BASE           0xFF000000
 200 #define CONFIG_SYS_FLASH_SIZE           32
 201 #define CONFIG_SYS_FLASH_CFI
 202 #define CONFIG_FLASH_CFI_DRIVER
 203 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of flash banks       */
 204 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max num of sects on one chip */
 205
 206 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 207
 208 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 209 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 210 #define CONFIG_SYS_RAMBOOT
 211 #endif
 212
 213 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256KB for Monitor */
 214
 215 #define CONFIG_ENV_IS_IN_FLASH
 216
 217 #ifdef CONFIG_ENV_IS_IN_FLASH
 218 #define CONFIG_ENV_SECT_SIZE    0x10000
 219 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 220 #endif /* CONFIG_ENV_IS_IN_FLASH */
 221
 222 /*
 223  * I2C Bus
 224  */
 225 #define CONFIG_HARD_I2C         1       /* To enable I2C support        */
 226 #define CONFIG_SYS_I2C_SPEED            100000  /* I2C speed and slave address  */
 227 #define CONFIG_SYS_I2C_SLAVE            0x7F
 228
 229 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 230 /* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
 231 #define CONFIG_DTT_LM75         1       /* ON Semi's LM75               */
 232 #define CONFIG_DTT_SENSORS      {0}     /* Sensor addresses             */
 233 #define CONFIG_SYS_DTT_MAX_TEMP 70
 234 #define CONFIG_SYS_DTT_LOW_TEMP -30
 235 #define CONFIG_SYS_DTT_HYSTERESIS       3
 236
 237 #define CONFIG_SYS_IMMR         0xF0000000
 238 #define CONFIG_SYS_DEFAULT_IMMR 0x0F010000
 239
 240 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 241 #define CONFIG_SYS_INIT_RAM_SIZE        0x2000  /* Size of used area in DPRAM   */
 242 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 243 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 244
 245 /* Hard reset configuration word */
 246 #define CONFIG_SYS_HRCW_MASTER          0x0E028200      /* BPS=11 CIP=1 ISB=010 BMS=1 */
 247
 248 /* No slaves */
 249 #define CONFIG_SYS_HRCW_SLAVE1  0
 250 #define CONFIG_SYS_HRCW_SLAVE2  0
 251 #define CONFIG_SYS_HRCW_SLAVE3  0
 252 #define CONFIG_SYS_HRCW_SLAVE4  0
 253 #define CONFIG_SYS_HRCW_SLAVE5  0
 254 #define CONFIG_SYS_HRCW_SLAVE6  0
 255 #define CONFIG_SYS_HRCW_SLAVE7  0
 256
 257 #define CONFIG_SYS_MALLOC_LEN           (4096 << 10)    /* Reserve 4 MB for malloc()    */
 258 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 259
 260 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC8260 CPUs */
 261 #if defined(CONFIG_CMD_KGDB)
 262 #  define CONFIG_SYS_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 263 #endif
 264
 265 #define CONFIG_SYS_HID0_INIT            0
 266 #define CONFIG_SYS_HID0_FINAL           (HID0_ICE | HID0_IFEM | HID0_ABE)
 267
 268 #define CONFIG_SYS_HID2         0
 269
 270 #define CONFIG_SYS_SIUMCR               0x00200000
 271 #define CONFIG_SYS_BCR                  0x004c0000
 272 #define CONFIG_SYS_SCCR         0x0
 273
 274 /*-----------------------------------------------------------------------
 275  * SYPCR - System Protection Control                             4-35
 276  * SYPCR can only be written once after reset!
 277  *-----------------------------------------------------------------------
 278  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
 279  */
 280 #if defined(CONFIG_WATCHDOG)
 281 #define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 282                          SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 283 #else
 284 #define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 285                          SYPCR_SWRI|SYPCR_SWP)
 286 #endif /* CONFIG_WATCHDOG */
 287
 288 /*-----------------------------------------------------------------------
 289  * RMR - Reset Mode Register                                     5-5
 290  *-----------------------------------------------------------------------
 291  * turn on Checkstop Reset Enable
 292  */
 293 #define CONFIG_SYS_RMR         0
 294
 295 /*-----------------------------------------------------------------------
 296  * TMCNTSC - Time Counter Status and Control                     4-40
 297  *-----------------------------------------------------------------------
 298  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
 299  * and enable Time Counter
 300  */
 301 #define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 302
 303 /*-----------------------------------------------------------------------
 304  * PISCR - Periodic Interrupt Status and Control                 4-42
 305  *-----------------------------------------------------------------------
 306  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
 307  * Periodic timer
 308  */
 309 #define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 310
 311 /*-----------------------------------------------------------------------
 312  * RCCR - RISC Controller Configuration                         13-7
 313  *-----------------------------------------------------------------------
 314  */
 315 #define CONFIG_SYS_RCCR        0
 316
 317 /*
 318  * Init Memory Controller:
 319  *
 320  * Bank Bus     Machine PortSz  Device
 321  * ---- ---     ------- ------  ------
 322  *  0   60x     GPCM    32 bit  FLASH
 323  *  1   60x     SDRAM   64 bit  SDRAM
 324  *  4   60x     GPCM    16 bit  I/O Ctrl
 325  *
 326  */
 327 /* Bank 0 - FLASH
 328  */
 329 #define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)    |\
 330                          BRx_PS_32                      |\
 331                          BRx_MS_GPCM_P                  |\
 332                          BRx_V)
 333
 334 #define CONFIG_SYS_OR0_PRELIM (0xff000020)
 335
 336 /* Bank 1 - 60x bus SDRAM
 337  */
 338 #define CONFIG_SYS_GLOBAL_SDRAM_LIMIT   (256 << 20)     /* less than 256 MB */
 339
 340 #define CONFIG_SYS_MPTPR       0x2800
 341
 342 /*-----------------------------------------------------------------------------
 343  * Address for Mode Register Set (MRS) command
 344  *-----------------------------------------------------------------------------
 345  */
 346 #define CONFIG_SYS_MRS_OFFS     0x00000110
 347 #define CONFIG_SYS_PSRT        0x13
 348
 349 #define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 350                          BRx_PS_64                      |\
 351                          BRx_MS_SDRAM_P                 |\
 352                          BRx_V)
 353
 354 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR1_LITTLE
 355
 356 /* SDRAM initialization values
 357 */
 358 #define CONFIG_SYS_OR1_LITTLE   ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 359                          ORxS_BPD_4                     |\
 360                          ORxS_ROWST_PBI1_A7             |\
 361                          ORxS_NUMR_12)
 362
 363 #define CONFIG_SYS_PSDMR_LITTLE 0x004b36a3
 364
 365 #define CONFIG_SYS_OR1_BIG      ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 366                          ORxS_BPD_4                     |\
 367                          ORxS_ROWST_PBI1_A4             |\
 368                          ORxS_NUMR_12)
 369
 370 #define CONFIG_SYS_PSDMR_BIG            0x014f36a3
 371
 372 /* IO on CS4 initialization values
 373 */
 374 #define CONFIG_SYS_IO_BASE      0xc0000000
 375 #define CONFIG_SYS_IO_SIZE      1
 376
 377 #define CONFIG_SYS_BR4_PRELIM   ((CONFIG_SYS_IO_BASE & BRx_BA_MSK) |\
 378                          BRx_PS_16 | BRx_MS_GPCM_L | BRx_V)
 379
 380 #define CONFIG_SYS_OR4_PRELIM   (0xfff80020)
 381
 382 #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC     /* "bad" address                */
 383
 384 /* pass open firmware flat tree */
 385 #define CONFIG_OF_LIBFDT        1
 386 #define CONFIG_OF_BOARD_SETUP   1
 387
 388 #define OF_TBCLK                (bd->bi_busfreq / 4)
 389 #if defined(CONFIG_MUAS_DEV_BOARD)
 390 #define OF_STDOUT_PATH          "/soc/cpm/serial@11a90"
 391 #else
 392 #define OF_STDOUT_PATH          "/soc/cpm/serial@11a80"
 393 #endif
 394
 395 #endif /* __CONFIG_H */