include/configs/mx6qsabrelite.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q Sabre Lite board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #define CONFIG_MX6
  13 #define CONFIG_MX6Q
  14
  15 #include "mx6_common.h"
  16
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #define CONFIG_MACH_TYPE        3769
  21
  22 #include <asm/arch/imx-regs.h>
  23 #include <asm/imx-common/gpio.h>
  24
  25 #define CONFIG_CMDLINE_TAG
  26 #define CONFIG_SETUP_MEMORY_TAGS
  27 #define CONFIG_INITRD_TAG
  28 #define CONFIG_REVISION_TAG
  29
  30 /* Size of malloc() pool */
  31 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  32
  33 #define CONFIG_BOARD_EARLY_INIT_F
  34 #define CONFIG_MISC_INIT_R
  35 #define CONFIG_MXC_GPIO
  36
  37 #define CONFIG_CMD_FUSE
  38 #ifdef CONFIG_CMD_FUSE
  39 #define CONFIG_MXC_OCOTP
  40 #endif
  41
  42 #define CONFIG_MXC_UART
  43 #define CONFIG_MXC_UART_BASE           UART2_BASE
  44
  45 #define CONFIG_CMD_SF
  46 #ifdef CONFIG_CMD_SF
  47 #define CONFIG_SPI_FLASH
  48 #define CONFIG_SPI_FLASH_SST
  49 #define CONFIG_MXC_SPI
  50 #define CONFIG_SF_DEFAULT_BUS  0
  51 #define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
  52 #define CONFIG_SF_DEFAULT_SPEED 25000000
  53 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  54 #endif
  55
  56 /* I2C Configs */
  57 #define CONFIG_CMD_I2C
  58 #define CONFIG_I2C_MULTI_BUS
  59 #define CONFIG_I2C_MXC
  60 #define CONFIG_SYS_I2C_SPEED            100000
  61
  62 /* MMC Configs */
  63 #define CONFIG_FSL_ESDHC
  64 #define CONFIG_FSL_USDHC
  65 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  66 #define CONFIG_SYS_FSL_USDHC_NUM       2
  67
  68 #define CONFIG_MMC
  69 #define CONFIG_CMD_MMC
  70 #define CONFIG_GENERIC_MMC
  71 #define CONFIG_BOUNCE_BUFFER
  72 #define CONFIG_CMD_EXT2
  73 #define CONFIG_CMD_FAT
  74 #define CONFIG_DOS_PARTITION
  75
  76 #define CONFIG_CMD_SATA
  77 /*
  78  * SATA Configs
  79  */
  80 #ifdef CONFIG_CMD_SATA
  81 #define CONFIG_DWC_AHSATA
  82 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  83 #define CONFIG_DWC_AHSATA_PORT_ID       0
  84 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  85 #define CONFIG_LBA48
  86 #define CONFIG_LIBATA
  87 #endif
  88
  89 #define CONFIG_CMD_PING
  90 #define CONFIG_CMD_DHCP
  91 #define CONFIG_CMD_MII
  92 #define CONFIG_CMD_NET
  93 #define CONFIG_FEC_MXC
  94 #define CONFIG_MII
  95 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  96 #define CONFIG_FEC_XCV_TYPE             RGMII
  97 #define CONFIG_ETHPRIME                 "FEC"
  98 #define CONFIG_FEC_MXC_PHYADDR          6
  99 #define CONFIG_PHYLIB
 100 #define CONFIG_PHY_MICREL
 101 #define CONFIG_PHY_MICREL_KSZ9021
 102
 103 /* USB Configs */
 104 #define CONFIG_CMD_USB
 105 #define CONFIG_CMD_FAT
 106 #define CONFIG_USB_EHCI
 107 #define CONFIG_USB_EHCI_MX6
 108 #define CONFIG_USB_STORAGE
 109 #define CONFIG_USB_HOST_ETHER
 110 #define CONFIG_USB_ETHER_ASIX
 111 #define CONFIG_USB_ETHER_SMSC95XX
 112 #define CONFIG_MXC_USB_PORT     1
 113 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 114 #define CONFIG_MXC_USB_FLAGS    0
 115
 116 /* Miscellaneous commands */
 117 #define CONFIG_CMD_BMODE
 118
 119 /* Framebuffer and LCD */
 120 #define CONFIG_VIDEO
 121 #define CONFIG_VIDEO_IPUV3
 122 #define CONFIG_CFB_CONSOLE
 123 #define CONFIG_VGA_AS_SINGLE_DEVICE
 124 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 125 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 126 #define CONFIG_VIDEO_BMP_RLE8
 127 #define CONFIG_SPLASH_SCREEN
 128 #define CONFIG_BMP_16BPP
 129 #define CONFIG_VIDEO_LOGO
 130 #define CONFIG_IPUV3_CLK 260000000
 131
 132 /* allow to overwrite serial and ethaddr */
 133 #define CONFIG_ENV_OVERWRITE
 134 #define CONFIG_CONS_INDEX              1
 135 #define CONFIG_BAUDRATE                        115200
 136
 137 /* Command definition */
 138 #include <config_cmd_default.h>
 139
 140 #undef CONFIG_CMD_IMLS
 141
 142 #define CONFIG_BOOTDELAY               1
 143
 144 #define CONFIG_PREBOOT                 ""
 145
 146 #define CONFIG_LOADADDR                        0x12000000
 147 #define CONFIG_SYS_TEXT_BASE           0x17800000
 148
 149 #define CONFIG_EXTRA_ENV_SETTINGS \
 150         "script=boot.scr\0" \
 151         "uimage=uImage\0" \
 152         "console=ttymxc1\0" \
 153         "fdt_high=0xffffffff\0" \
 154         "initrd_high=0xffffffff\0" \
 155         "fdt_file=imx6q-sabrelite.dtb\0" \
 156         "fdt_addr=0x11000000\0" \
 157         "boot_fdt=try\0" \
 158         "ip_dyn=yes\0" \
 159         "mmcdev=0\0" \
 160         "mmcpart=1\0" \
 161         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 162         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 163                 "root=${mmcroot}\0" \
 164         "loadbootscript=" \
 165                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 166         "bootscript=echo Running bootscript from mmc ...; " \
 167                 "source\0" \
 168         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 169         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 170         "mmcboot=echo Booting from mmc ...; " \
 171                 "run mmcargs; " \
 172                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 173                         "if run loadfdt; then " \
 174                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 175                         "else " \
 176                                 "if test ${boot_fdt} = try; then " \
 177                                         "bootm; " \
 178                                 "else " \
 179                                         "echo WARN: Cannot load the DT; " \
 180                                 "fi; " \
 181                         "fi; " \
 182                 "else " \
 183                         "bootm; " \
 184                 "fi;\0" \
 185         "netargs=setenv bootargs console=${console},${baudrate} " \
 186                 "root=/dev/nfs " \
 187         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 188                 "netboot=echo Booting from net ...; " \
 189                 "run netargs; " \
 190                 "if test ${ip_dyn} = yes; then " \
 191                         "setenv get_cmd dhcp; " \
 192                 "else " \
 193                         "setenv get_cmd tftp; " \
 194                 "fi; " \
 195                 "${get_cmd} ${uimage}; " \
 196                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 197                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 198                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 199                         "else " \
 200                                 "if test ${boot_fdt} = try; then " \
 201                                         "bootm; " \
 202                                 "else " \
 203                                         "echo WARN: Cannot load the DT; " \
 204                                 "fi; " \
 205                         "fi; " \
 206                 "else " \
 207                         "bootm; " \
 208                 "fi;\0"
 209
 210 #define CONFIG_BOOTCOMMAND \
 211            "mmc dev ${mmcdev}; if mmc rescan; then " \
 212                    "if run loadbootscript; then " \
 213                            "run bootscript; " \
 214                    "else " \
 215                            "if run loaduimage; then " \
 216                                    "run mmcboot; " \
 217                            "else run netboot; " \
 218                            "fi; " \
 219                    "fi; " \
 220            "else run netboot; fi"
 221
 222 /* Miscellaneous configurable options */
 223 #define CONFIG_SYS_LONGHELP
 224 #define CONFIG_SYS_HUSH_PARSER
 225 #define CONFIG_SYS_PROMPT              "MX6QSABRELITE U-Boot > "
 226 #define CONFIG_AUTO_COMPLETE
 227 #define CONFIG_SYS_CBSIZE              256
 228
 229 /* Print Buffer Size */
 230 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 231 #define CONFIG_SYS_MAXARGS             16
 232 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 233
 234 #define CONFIG_SYS_MEMTEST_START       0x10000000
 235 #define CONFIG_SYS_MEMTEST_END         0x10010000
 236 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 237
 238 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 239 #define CONFIG_SYS_HZ                  1000
 240
 241 #define CONFIG_CMDLINE_EDITING
 242
 243 /* Physical Memory Map */
 244 #define CONFIG_NR_DRAM_BANKS           1
 245 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 246 #define PHYS_SDRAM_SIZE                        (1u * 1024 * 1024 * 1024)
 247
 248 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 249 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 250 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 251
 252 #define CONFIG_SYS_INIT_SP_OFFSET \
 253        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 254 #define CONFIG_SYS_INIT_SP_ADDR \
 255        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 256
 257 /* FLASH and environment organization */
 258 #define CONFIG_SYS_NO_FLASH
 259
 260 #define CONFIG_ENV_SIZE                 (8 * 1024)
 261
 262 #define CONFIG_ENV_IS_IN_MMC
 263 /* #define CONFIG_ENV_IS_IN_SPI_FLASH */
 264
 265 #if defined(CONFIG_ENV_IS_IN_MMC)
 266 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 267 #define CONFIG_SYS_MMC_ENV_DEV          0
 268 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 269 #define CONFIG_ENV_OFFSET               (768 * 1024)
 270 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 271 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 272 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 273 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 274 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 275 #endif
 276
 277 #define CONFIG_OF_LIBFDT
 278 #define CONFIG_CMD_BOOTZ
 279
 280 #ifndef CONFIG_SYS_DCACHE_OFF
 281 #define CONFIG_CMD_CACHE
 282 #endif
 283
 284 #endif                         /* __CONFIG_H */