include/configs/mx6sxsabresd.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6SX Sabresd board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "mx6_common.h"
  14
  15 #ifdef CONFIG_SPL
  16 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  17 #define CONFIG_SPL_MMC_SUPPORT
  18 #include "imx6_spl.h"
  19 #endif
  20
  21 /* Size of malloc() pool */
  22 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  23
  24 #define CONFIG_BOARD_EARLY_INIT_F
  25
  26 #define CONFIG_MXC_UART
  27 #define CONFIG_MXC_UART_BASE            UART1_BASE
  28
  29 #define CONFIG_EXTRA_ENV_SETTINGS \
  30         "script=boot.scr\0" \
  31         "image=zImage\0" \
  32         "console=ttymxc0\0" \
  33         "fdt_high=0xffffffff\0" \
  34         "initrd_high=0xffffffff\0" \
  35         "fdt_file=imx6sx-sdb.dtb\0" \
  36         "fdt_addr=0x88000000\0" \
  37         "boot_fdt=try\0" \
  38         "ip_dyn=yes\0" \
  39         "mmcdev=2\0" \
  40         "mmcpart=1\0" \
  41         "mmcroot=/dev/mmcblk3p2 rootwait rw\0" \
  42         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  43                 "root=${mmcroot}\0" \
  44         "loadbootscript=" \
  45                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  46         "bootscript=echo Running bootscript from mmc ...; " \
  47                 "source\0" \
  48         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  49         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  50         "mmcboot=echo Booting from mmc ...; " \
  51                 "run mmcargs; " \
  52                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  53                         "if run loadfdt; then " \
  54                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  55                         "else " \
  56                                 "if test ${boot_fdt} = try; then " \
  57                                         "bootz; " \
  58                                 "else " \
  59                                         "echo WARN: Cannot load the DT; " \
  60                                 "fi; " \
  61                         "fi; " \
  62                 "else " \
  63                         "bootz; " \
  64                 "fi;\0" \
  65         "netargs=setenv bootargs console=${console},${baudrate} " \
  66                 "root=/dev/nfs " \
  67         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  68                 "netboot=echo Booting from net ...; " \
  69                 "run netargs; " \
  70                 "if test ${ip_dyn} = yes; then " \
  71                         "setenv get_cmd dhcp; " \
  72                 "else " \
  73                         "setenv get_cmd tftp; " \
  74                 "fi; " \
  75                 "${get_cmd} ${image}; " \
  76                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  77                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  78                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  79                         "else " \
  80                                 "if test ${boot_fdt} = try; then " \
  81                                         "bootz; " \
  82                                 "else " \
  83                                         "echo WARN: Cannot load the DT; " \
  84                                 "fi; " \
  85                         "fi; " \
  86                 "else " \
  87                         "bootz; " \
  88                 "fi;\0"
  89
  90 #define CONFIG_BOOTCOMMAND \
  91            "mmc dev ${mmcdev};" \
  92            "mmc dev ${mmcdev}; if mmc rescan; then " \
  93                    "if run loadbootscript; then " \
  94                            "run bootscript; " \
  95                    "else " \
  96                            "if run loadimage; then " \
  97                                    "run mmcboot; " \
  98                            "else run netboot; " \
  99                            "fi; " \
 100                    "fi; " \
 101            "else run netboot; fi"
 102
 103 /* Miscellaneous configurable options */
 104 #define CONFIG_SYS_MEMTEST_START        0x80000000
 105 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x10000)
 106
 107 #define CONFIG_STACKSIZE                SZ_128K
 108
 109 /* Physical Memory Map */
 110 #define CONFIG_NR_DRAM_BANKS            1
 111 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 112 #define PHYS_SDRAM_SIZE                 SZ_1G
 113
 114 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 115 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 116 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 117
 118 #define CONFIG_SYS_INIT_SP_OFFSET \
 119         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 120 #define CONFIG_SYS_INIT_SP_ADDR \
 121         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 122
 123 /* MMC Configuration */
 124 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
 125
 126 /* I2C Configs */
 127 #define CONFIG_CMD_I2C
 128 #define CONFIG_SYS_I2C
 129 #define CONFIG_SYS_I2C_MXC
 130 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 131 #define CONFIG_SYS_I2C_SPEED              100000
 132
 133 /* PMIC */
 134 #define CONFIG_POWER
 135 #define CONFIG_POWER_I2C
 136 #define CONFIG_POWER_PFUZE100
 137 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 138
 139 /* Network */
 140 #define CONFIG_CMD_PING
 141 #define CONFIG_CMD_DHCP
 142 #define CONFIG_CMD_MII
 143 #define CONFIG_FEC_MXC
 144 #define CONFIG_MII
 145
 146 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 147 #define CONFIG_FEC_MXC_PHYADDR          0x1
 148
 149 #define CONFIG_FEC_XCV_TYPE             RGMII
 150 #define CONFIG_ETHPRIME                 "FEC"
 151
 152 #define CONFIG_PHYLIB
 153 #define CONFIG_PHY_ATHEROS
 154
 155
 156 #define CONFIG_CMD_USB
 157 #ifdef CONFIG_CMD_USB
 158 #define CONFIG_USB_EHCI
 159 #define CONFIG_USB_EHCI_MX6
 160 #define CONFIG_USB_STORAGE
 161 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 162 #define CONFIG_USB_HOST_ETHER
 163 #define CONFIG_USB_ETHER_ASIX
 164 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 165 #define CONFIG_MXC_USB_FLAGS   0
 166 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 167 #endif
 168
 169 #define CONFIG_CMD_PCI
 170 #ifdef CONFIG_CMD_PCI
 171 #define CONFIG_PCI
 172 #define CONFIG_PCI_PNP
 173 #define CONFIG_PCI_SCAN_SHOW
 174 #define CONFIG_PCIE_IMX
 175 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(2, 0)
 176 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(2, 1)
 177 #endif
 178
 179 #define CONFIG_IMX6_THERMAL
 180
 181 #define CONFIG_CMD_FUSE
 182 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
 183 #define CONFIG_MXC_OCOTP
 184 #endif
 185
 186 #define CONFIG_CMD_TIME
 187
 188 #define CONFIG_FSL_QSPI
 189
 190 #ifdef CONFIG_FSL_QSPI
 191 #define CONFIG_CMD_SF
 192 #define CONFIG_SPI_FLASH
 193 #define CONFIG_SPI_FLASH_BAR
 194 #define CONFIG_SPI_FLASH_SPANSION
 195 #define CONFIG_SPI_FLASH_STMICRO
 196 #define CONFIG_SYS_FSL_QSPI_LE
 197 #define CONFIG_SYS_FSL_QSPI_AHB
 198 #ifdef CONFIG_MX6SX_SABRESD_REVA
 199 #define FSL_QSPI_FLASH_SIZE             SZ_16M
 200 #else
 201 #define FSL_QSPI_FLASH_SIZE             SZ_32M
 202 #endif
 203 #define FSL_QSPI_FLASH_NUM              2
 204 #endif
 205
 206 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 207 #define CONFIG_ENV_SIZE                 SZ_8K
 208 #define CONFIG_ENV_IS_IN_MMC
 209
 210 #define CONFIG_SYS_FSL_USDHC_NUM        3
 211 #if defined(CONFIG_ENV_IS_IN_MMC)
 212 #define CONFIG_SYS_MMC_ENV_DEV          2  /*USDHC4*/
 213 #endif
 214
 215 #endif                          /* __CONFIG_H */