include/configs/nitrogen6x.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Boundary Devices Nitrogen6X
   5  * and Freescale i.MX6Q Sabre Lite boards.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_MX6
  14 #define CONFIG_DISPLAY_CPUINFO
  15 #define CONFIG_DISPLAY_BOARDINFO
  16
  17 #define CONFIG_MACH_TYPE        3769
  18
  19 #include <asm/arch/imx-regs.h>
  20 #include <asm/imx-common/gpio.h>
  21
  22 #define CONFIG_CMDLINE_TAG
  23 #define CONFIG_SETUP_MEMORY_TAGS
  24 #define CONFIG_INITRD_TAG
  25 #define CONFIG_REVISION_TAG
  26
  27 /* Size of malloc() pool */
  28 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  29
  30 #define CONFIG_BOARD_EARLY_INIT_F
  31 #define CONFIG_MISC_INIT_R
  32 #define CONFIG_MXC_GPIO
  33
  34 #define CONFIG_CMD_FUSE
  35 #ifdef CONFIG_CMD_FUSE
  36 #define CONFIG_MXC_OCOTP
  37 #endif
  38
  39 #define CONFIG_MXC_UART
  40 #define CONFIG_MXC_UART_BASE           UART2_BASE
  41
  42 #define CONFIG_CMD_SF
  43 #ifdef CONFIG_CMD_SF
  44 #define CONFIG_SPI_FLASH
  45 #define CONFIG_SPI_FLASH_SST
  46 #define CONFIG_MXC_SPI
  47 #define CONFIG_SF_DEFAULT_BUS  0
  48 #define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
  49 #define CONFIG_SF_DEFAULT_SPEED 25000000
  50 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  51 #endif
  52
  53 /* I2C Configs */
  54 #define CONFIG_CMD_I2C
  55 #define CONFIG_SYS_I2C
  56 #define CONFIG_SYS_I2C_MXC
  57 #define CONFIG_SYS_I2C_SPEED            100000
  58
  59 /* OCOTP Configs */
  60 #define CONFIG_CMD_IMXOTP
  61 #ifdef CONFIG_CMD_IMXOTP
  62 #define CONFIG_IMX_OTP
  63 #define IMX_OTP_BASE                    OCOTP_BASE_ADDR
  64 #define IMX_OTP_ADDR_MAX                0x7F
  65 #define IMX_OTP_DATA_ERROR_VAL          0xBADABADA
  66 #define IMX_OTPWRITE_ENABLED
  67 #endif
  68
  69 /* MMC Configs */
  70 #define CONFIG_FSL_ESDHC
  71 #define CONFIG_FSL_USDHC
  72 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  73 #define CONFIG_SYS_FSL_USDHC_NUM       2
  74
  75 #define CONFIG_MMC
  76 #define CONFIG_CMD_MMC
  77 #define CONFIG_GENERIC_MMC
  78 #define CONFIG_BOUNCE_BUFFER
  79 #define CONFIG_CMD_EXT2
  80 #define CONFIG_CMD_FAT
  81 #define CONFIG_DOS_PARTITION
  82
  83 #ifdef CONFIG_MX6Q
  84 #define CONFIG_CMD_SATA
  85 #endif
  86
  87 /*
  88  * SATA Configs
  89  */
  90 #ifdef CONFIG_CMD_SATA
  91 #define CONFIG_DWC_AHSATA
  92 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  93 #define CONFIG_DWC_AHSATA_PORT_ID       0
  94 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  95 #define CONFIG_LBA48
  96 #define CONFIG_LIBATA
  97 #endif
  98
  99 #define CONFIG_CMD_PING
 100 #define CONFIG_CMD_DHCP
 101 #define CONFIG_CMD_MII
 102 #define CONFIG_CMD_NET
 103 #define CONFIG_FEC_MXC
 104 #define CONFIG_MII
 105 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 106 #define CONFIG_FEC_XCV_TYPE             RGMII
 107 #define CONFIG_ETHPRIME                 "FEC"
 108 #define CONFIG_FEC_MXC_PHYADDR          6
 109 #define CONFIG_PHYLIB
 110 #define CONFIG_PHY_MICREL
 111 #define CONFIG_PHY_MICREL_KSZ9021
 112
 113 /* USB Configs */
 114 #define CONFIG_CMD_USB
 115 #define CONFIG_CMD_FAT
 116 #define CONFIG_USB_EHCI
 117 #define CONFIG_USB_EHCI_MX6
 118 #define CONFIG_USB_STORAGE
 119 #define CONFIG_USB_HOST_ETHER
 120 #define CONFIG_USB_ETHER_ASIX
 121 #define CONFIG_USB_ETHER_SMSC95XX
 122 #define CONFIG_MXC_USB_PORT     1
 123 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 124 #define CONFIG_MXC_USB_FLAGS    0
 125
 126 /* Miscellaneous commands */
 127 #define CONFIG_CMD_BMODE
 128 #define CONFIG_CMD_SETEXPR
 129
 130 /* Framebuffer and LCD */
 131 #define CONFIG_VIDEO
 132 #define CONFIG_VIDEO_IPUV3
 133 #define CONFIG_CFB_CONSOLE
 134 #define CONFIG_VGA_AS_SINGLE_DEVICE
 135 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 136 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 137 #define CONFIG_VIDEO_BMP_RLE8
 138 #define CONFIG_SPLASH_SCREEN
 139 #define CONFIG_BMP_16BPP
 140 #define CONFIG_VIDEO_LOGO
 141 #define CONFIG_IPUV3_CLK 260000000
 142 #define CONFIG_CMD_HDMIDETECT
 143 #define CONFIG_CONSOLE_MUX
 144 #define CONFIG_IMX_HDMI
 145
 146 /* allow to overwrite serial and ethaddr */
 147 #define CONFIG_ENV_OVERWRITE
 148 #define CONFIG_CONS_INDEX              1
 149 #define CONFIG_BAUDRATE                        115200
 150
 151 /* Command definition */
 152 #include <config_cmd_default.h>
 153
 154 #undef CONFIG_CMD_IMLS
 155
 156 #define CONFIG_BOOTDELAY               1
 157
 158 #define CONFIG_PREBOOT                 ""
 159
 160 #define CONFIG_LOADADDR                        0x12000000
 161 #define CONFIG_SYS_TEXT_BASE           0x17800000
 162
 163 #ifdef CONFIG_CMD_SATA
 164 #define CONFIG_DRIVE_SATA "sata "
 165 #else
 166 #define CONFIG_DRIVE_SATA
 167 #endif
 168
 169 #ifdef CONFIG_CMD_MMC
 170 #define CONFIG_DRIVE_MMC "mmc "
 171 #else
 172 #define CONFIG_DRIVE_MMC
 173 #endif
 174
 175 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 176
 177 #if defined(CONFIG_SABRELITE)
 178 #define CONFIG_EXTRA_ENV_SETTINGS \
 179         "script=boot.scr\0" \
 180         "uimage=uImage\0" \
 181         "console=ttymxc1\0" \
 182         "fdt_high=0xffffffff\0" \
 183         "initrd_high=0xffffffff\0" \
 184         "fdt_file=imx6q-sabrelite.dtb\0" \
 185         "fdt_addr=0x11000000\0" \
 186         "boot_fdt=try\0" \
 187         "ip_dyn=yes\0" \
 188         "mmcdev=0\0" \
 189         "mmcpart=1\0" \
 190         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 191         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 192                 "root=${mmcroot}\0" \
 193         "loadbootscript=" \
 194                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 195         "bootscript=echo Running bootscript from mmc ...; " \
 196                 "source\0" \
 197         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 198         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 199         "mmcboot=echo Booting from mmc ...; " \
 200                 "run mmcargs; " \
 201                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 202                         "if run loadfdt; then " \
 203                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 204                         "else " \
 205                                 "if test ${boot_fdt} = try; then " \
 206                                         "bootm; " \
 207                                 "else " \
 208                                         "echo WARN: Cannot load the DT; " \
 209                                 "fi; " \
 210                         "fi; " \
 211                 "else " \
 212                         "bootm; " \
 213                 "fi;\0" \
 214         "netargs=setenv bootargs console=${console},${baudrate} " \
 215                 "root=/dev/nfs " \
 216         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 217                 "netboot=echo Booting from net ...; " \
 218                 "run netargs; " \
 219                 "if test ${ip_dyn} = yes; then " \
 220                         "setenv get_cmd dhcp; " \
 221                 "else " \
 222                         "setenv get_cmd tftp; " \
 223                 "fi; " \
 224                 "${get_cmd} ${uimage}; " \
 225                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 226                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 227                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 228                         "else " \
 229                                 "if test ${boot_fdt} = try; then " \
 230                                         "bootm; " \
 231                                 "else " \
 232                                         "echo WARN: Cannot load the DT; " \
 233                                 "fi; " \
 234                         "fi; " \
 235                 "else " \
 236                         "bootm; " \
 237                 "fi;\0"
 238
 239 #define CONFIG_BOOTCOMMAND \
 240            "mmc dev ${mmcdev}; if mmc rescan; then " \
 241                    "if run loadbootscript; then " \
 242                            "run bootscript; " \
 243                    "else " \
 244                            "if run loaduimage; then " \
 245                                    "run mmcboot; " \
 246                            "else run netboot; " \
 247                            "fi; " \
 248                    "fi; " \
 249            "else run netboot; fi"
 250 #else
 251 #define CONFIG_EXTRA_ENV_SETTINGS \
 252         "console=ttymxc1\0" \
 253         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 254                 "sf erase 0xc0000 0x2000 && " \
 255                 "echo restored environment to factory default ; fi\0" \
 256         "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
 257                 "; do " \
 258                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 259                                 "for fs in fat ext2 ; do " \
 260                                         "${fs}load " \
 261                                                 "${dtype} ${disk}:1 " \
 262                                                 "10008000 " \
 263                                                 "/6x_bootscript" \
 264                                                 "&& source 10008000 ; " \
 265                                 "done ; " \
 266                         "done ; " \
 267                 "done; " \
 268                 "setenv stdout serial,vga ; " \
 269                 "echo ; echo 6x_bootscript not found ; " \
 270                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
 271                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
 272                 "setenv stdout serial\0" \
 273         "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
 274                 "; do " \
 275                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 276                      "for fs in fat ext2 ; do " \
 277                                 "${fs}load ${dtype} ${disk}:1 10008000 " \
 278                                         "/6x_upgrade " \
 279                                         "&& source 10008000 ; " \
 280                         "done ; " \
 281                 "done ; " \
 282         "done\0" \
 283
 284 #endif
 285 /* Miscellaneous configurable options */
 286 #define CONFIG_SYS_LONGHELP
 287 #define CONFIG_SYS_HUSH_PARSER
 288 #define CONFIG_SYS_PROMPT              "U-Boot > "
 289 #define CONFIG_AUTO_COMPLETE
 290 #define CONFIG_SYS_CBSIZE              1024
 291
 292 /* Print Buffer Size */
 293 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 294 #define CONFIG_SYS_MAXARGS             16
 295 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 296
 297 #define CONFIG_SYS_MEMTEST_START       0x10000000
 298 #define CONFIG_SYS_MEMTEST_END         0x10010000
 299 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 300
 301 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 302 #define CONFIG_SYS_HZ                  1000
 303
 304 #define CONFIG_CMDLINE_EDITING
 305
 306 /* Physical Memory Map */
 307 #define CONFIG_NR_DRAM_BANKS           1
 308 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 309
 310 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 311 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 312 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 313
 314 #define CONFIG_SYS_INIT_SP_OFFSET \
 315         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 316 #define CONFIG_SYS_INIT_SP_ADDR \
 317         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 318
 319 /* FLASH and environment organization */
 320 #define CONFIG_SYS_NO_FLASH
 321
 322 #define CONFIG_ENV_SIZE                 (8 * 1024)
 323
 324 #if defined(CONFIG_SABRELITE)
 325 #define CONFIG_ENV_IS_IN_MMC
 326 #else
 327 #define CONFIG_ENV_IS_IN_SPI_FLASH
 328 #endif
 329
 330 #if defined(CONFIG_ENV_IS_IN_MMC)
 331 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 332 #define CONFIG_SYS_MMC_ENV_DEV          0
 333 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 334 #define CONFIG_ENV_OFFSET               (768 * 1024)
 335 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 336 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 337 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 338 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 339 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 340 #endif
 341
 342 #define CONFIG_OF_LIBFDT
 343 #define CONFIG_CMD_BOOTZ
 344
 345 #ifndef CONFIG_SYS_DCACHE_OFF
 346 #define CONFIG_CMD_CACHE
 347 #endif
 348
 349 #define CONFIG_CMD_BMP
 350
 351 #define CONFIG_CMD_TIME
 352 #define CONFIG_SYS_ALT_MEMTEST
 353
 354 #define CONFIG_CMD_BOOTZ
 355 #define CONFIG_SUPPORT_RAW_INITRD
 356 #define CONFIG_CMD_FS_GENERIC
 357
 358 #endif         /* __CONFIG_H */