]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/o2d300.h
Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging
[karo-tx-uboot.git] / include / configs / o2d300.h
1 /*
2  * (C) Copyright 2012
3  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License as
7  * published by the Free Software Foundation; either version 2 of
8  * the License, or (at your option) any later version.
9  */
10
11 /*
12  * Valid values for CONFIG_SYS_TEXT_BASE are:
13  * 0xFC000000   boot low boot high (standard configuration)
14  * 0x00100000   boot from RAM (for testing only)
15  */
16 #ifndef CONFIG_SYS_TEXT_BASE
17 #define CONFIG_SYS_TEXT_BASE    0xfc000000      /* Standard: boot low */
18 #endif
19
20 /* Board specific flash config */
21 #define CONFIG_SYS_FLASH_BASE           0xfc000000
22 #define CONFIG_SYS_FLASH_SIZE           0x04000000      /* maximum 64MB */
23 /* max number of sectors on one chip */
24 #define CONFIG_SYS_MAX_FLASH_SECT       512
25
26 /*
27  * Include common defines for all ifm boards
28  */
29 #include "o2dnt-common.h"
30
31 /*
32  * GPIO configuration:
33  * CS1 SDRAM activate + no CAN + no PCI
34  */
35 #define CONFIG_SYS_GPS_PORT_CONFIG      0x8000A004
36
37 /* Other board specific configs */
38 #define CONFIG_SYS_BOOTCS_CFG           0x00057d01
39 #define CONFIG_SYS_RESET_ADDRESS        0xfc000000
40
41 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
42 #define CONFIG_SYS_MEMTEST_END          0x07f00000      /* 1 - 127 MB in DRAM */
43
44 /* Use redundant environment */
45 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
46 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
47
48 #define CONFIG_BOARD_NAME               "o2d300"
49 #define CONFIG_BOARD_BOOTCMD            "run dhcp_boot"
50 #define CONFIG_BOARD_MEM_LIMIT          xstr(126)
51 #define BOARD_POST_CRC32_END            xstr(0x02000000)
52
53 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
54         CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
55         CONFIG_IFM_DEFAULT_ENV_OLD                                      \
56         CONFIG_IFM_DEFAULT_ENV_NEW                                      \
57         "autoload=no\0"                                                 \
58         "dhcp_boot=run dhcpcmd;run flash_mtd\0"                         \
59         "flash_mtd=run mtd_args addip addmem;"                          \
60                 "bootm ${kernel_addr}\0"                                \
61         "mtd_args=setenv bootargs root=/dev/mtdblock4 "                 \
62                 "rw rootfstype=cramfs\0"                                \
63         "linbot=fc080000\0"                                             \
64         "lintop=fc17ffff\0"                                             \
65         "rambot=fc180000\0"                                             \
66         "ramtop=fc57ffff\0"                                             \
67         "jffbot=fc580000\0"                                             \
68         "jfftop=fd39ffff\0"                                             \
69         "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
70         "ubotop=fc03ffff\0"                                             \
71         "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0"      \
72         "halbot=fd3a0000\0"                                             \
73         "haltop=fdf9ffff\0"                                             \
74         "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};"     \
75                 "cp.b ${fileaddr} ${halbot} ${filesize}\0"              \
76         "kernel_addr=0xfc060000\0"                                      \
77         "ramdisk_addr=0xfc160000\0"                                     \
78         "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"           \
79                 "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"               \
80         "netretry=once\0"                                               \
81         "protcmd=protect on ${linbot} ${lintop};"                       \
82                 "protect on ${rambot} ${ramtop}\0"                      \
83         "o2derror=def_env\0"                                            \
84         "sensorType=O2D300AA\0"