include/configs/omap3_igep00x0.h

   1 /*
   2  * Common configuration settings for IGEP technology based boards
   3  *
   4  * (C) Copyright 2012
   5  * ISEE 2007 SL, <www.iseebcn.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __IGEP00X0_H
  11 #define __IGEP00X0_H
  12
  13 #include <asm/sizes.h>
  14
  15 /*
  16  * High Level Configuration Options
  17  */
  18 #define CONFIG_OMAP             1       /* in a TI OMAP core */
  19 #define CONFIG_OMAP34XX         1       /* which is a 34XX */
  20 #define CONFIG_OMAP_GPIO
  21 #define CONFIG_OMAP_COMMON
  22
  23 #define CONFIG_SDRC     /* The chip has SDRC controller */
  24
  25 #include <asm/arch/cpu.h>
  26 #include <asm/arch/omap3.h>
  27 #include <asm/mach-types.h>
  28
  29 /*
  30  * Display CPU and Board information
  31  */
  32 #define CONFIG_DISPLAY_CPUINFO          1
  33 #define CONFIG_DISPLAY_BOARDINFO        1
  34
  35 /* Clock Defines */
  36 #define V_OSCK                  26000000        /* Clock output from T2 */
  37 #define V_SCLK                  (V_OSCK >> 1)
  38
  39 #define CONFIG_MISC_INIT_R
  40
  41 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
  42 #define CONFIG_SETUP_MEMORY_TAGS        1
  43 #define CONFIG_INITRD_TAG               1
  44 #define CONFIG_REVISION_TAG             1
  45
  46 #define CONFIG_OF_LIBFDT
  47 #define CONFIG_CMD_BOOTZ
  48 #define CONFIG_SUPPORT_RAW_INITRD
  49
  50 /*
  51  * NS16550 Configuration
  52  */
  53
  54 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  55
  56 #define CONFIG_SYS_NS16550
  57 #define CONFIG_SYS_NS16550_SERIAL
  58 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  59 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  60
  61 /* select serial console configuration */
  62 #define CONFIG_CONS_INDEX               3
  63 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  64 #define CONFIG_SERIAL3                  3
  65
  66 /* allow to overwrite serial and ethaddr */
  67 #define CONFIG_ENV_OVERWRITE
  68 #define CONFIG_BAUDRATE                 115200
  69 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600, \
  70                                         115200}
  71 #define CONFIG_GENERIC_MMC              1
  72 #define CONFIG_MMC                      1
  73 #define CONFIG_OMAP_HSMMC               1
  74 #define CONFIG_DOS_PARTITION            1
  75
  76 /* define to enable boot progress via leds */
  77 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
  78     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
  79 #define CONFIG_SHOW_BOOT_PROGRESS
  80 #endif
  81
  82 /* USB */
  83 #define CONFIG_MUSB_UDC                 1
  84 #define CONFIG_USB_OMAP3                1
  85 #define CONFIG_TWL4030_USB              1
  86
  87 /* USB device configuration */
  88 #define CONFIG_USB_DEVICE               1
  89 #define CONFIG_USB_TTY                  1
  90 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  91
  92 /* Change these to suit your needs */
  93 #define CONFIG_USBD_VENDORID            0x0451
  94 #define CONFIG_USBD_PRODUCTID           0x5678
  95 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  96 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
  97
  98 /* commands to include */
  99 #include <config_cmd_default.h>
 100
 101 #define CONFIG_CMD_CACHE
 102 #define CONFIG_CMD_EXT4
 103 #define CONFIG_CMD_FAT          /* FAT support                  */
 104 #define CONFIG_CMD_FS_GENERIC
 105 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
 106 #define CONFIG_CMD_MMC          /* MMC support                  */
 107 #ifdef CONFIG_BOOT_ONENAND
 108 #define CONFIG_CMD_ONENAND      /* ONENAND support              */
 109 #endif
 110 #ifdef CONFIG_BOOT_NAND
 111 #define CONFIG_CMD_NAND
 112 #endif
 113 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
 114     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
 115 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
 116 #endif
 117 #define CONFIG_CMD_DHCP
 118 #define CONFIG_CMD_PING
 119 #define CONFIG_CMD_NFS          /* NFS support                  */
 120 #define CONFIG_CMD_MTDPARTS     /* Enable MTD parts commands    */
 121 #define CONFIG_MTD_DEVICE
 122
 123 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
 124 #undef CONFIG_CMD_IMLS          /* List all found images        */
 125
 126 #define CONFIG_SYS_NO_FLASH
 127 #define CONFIG_SYS_I2C
 128 #define CONFIG_SYS_I2C_OMAP34XX
 129 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 130 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 131
 132 /*
 133  * TWL4030
 134  */
 135 #define CONFIG_TWL4030_POWER            1
 136
 137 #define CONFIG_BOOTDELAY                3
 138
 139 #define CONFIG_EXTRA_ENV_SETTINGS \
 140         "usbtty=cdc_acm\0" \
 141         "loadaddr=0x82000000\0" \
 142         "dtbaddr=0x81600000\0" \
 143         "bootdir=/boot\0" \
 144         "bootfile=zImage\0" \
 145         "usbtty=cdc_acm\0" \
 146         "console=ttyO2,115200n8\0" \
 147         "mpurate=auto\0" \
 148         "vram=12M\0" \
 149         "dvimode=1024x768MR-16@60\0" \
 150         "defaultdisplay=dvi\0" \
 151         "mmcdev=0\0" \
 152         "mmcroot=/dev/mmcblk0p2 rw\0" \
 153         "mmcrootfstype=ext4 rootwait\0" \
 154         "nandroot=/dev/mtdblock4 rw\0" \
 155         "nandrootfstype=jffs2\0" \
 156         "mmcargs=setenv bootargs console=${console} " \
 157                 "mpurate=${mpurate} " \
 158                 "vram=${vram} " \
 159                 "omapfb.mode=dvi:${dvimode} " \
 160                 "omapfb.debug=y " \
 161                 "omapdss.def_disp=${defaultdisplay} " \
 162                 "root=${mmcroot} " \
 163                 "rootfstype=${mmcrootfstype}\0" \
 164         "nandargs=setenv bootargs console=${console} " \
 165                 "mpurate=${mpurate} " \
 166                 "vram=${vram} " \
 167                 "omapfb.mode=dvi:${dvimode} " \
 168                 "omapfb.debug=y " \
 169                 "omapdss.def_disp=${defaultdisplay} " \
 170                 "root=${nandroot} " \
 171                 "rootfstype=${nandrootfstype}\0" \
 172         "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
 173         "importbootenv=echo Importing environment from mmc ...; " \
 174                 "env import -t $loadaddr $filesize\0" \
 175         "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
 176         "loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
 177         "mmcboot=echo Booting from mmc ...; " \
 178                 "run mmcargs; " \
 179                 "bootz ${loadaddr}\0" \
 180         "mmcbootfdt=echo Booting with DT from mmc ...; " \
 181                 "bootz ${loadaddr} - ${dtbaddr}\0" \
 182         "nandboot=echo Booting from onenand ...; " \
 183                 "run nandargs; " \
 184                 "onenand read ${loadaddr} 280000 400000; " \
 185                 "bootz ${loadaddr}\0" \
 186
 187 #define CONFIG_BOOTCOMMAND \
 188         "mmc dev ${mmcdev}; if mmc rescan; then " \
 189                 "echo SD/MMC found on device ${mmcdev};" \
 190                 "if run loadbootenv; then " \
 191                         "run importbootenv;" \
 192                 "fi;" \
 193                 "if test -n $uenvcmd; then " \
 194                         "echo Running uenvcmd ...;" \
 195                         "run uenvcmd;" \
 196                 "fi;" \
 197                 "if run loadzimage; then " \
 198                         "if test -n $dtbfile; then " \
 199                                 "if run loadfdt; then " \
 200                                         "run mmcbootfdt;" \
 201                                 "fi;" \
 202                         "fi;" \
 203                         "run mmcboot;" \
 204                 "fi;" \
 205         "fi;" \
 206         "run nandboot;" \
 207
 208 #define CONFIG_AUTO_COMPLETE            1
 209
 210 /*
 211  * Miscellaneous configurable options
 212  */
 213 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 214 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 215 #define CONFIG_SYS_PROMPT               "U-Boot # "
 216 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 217 /* Print Buffer Size */
 218 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 219                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 220 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 221 /* Boot Argument Buffer Size */
 222 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 223
 224 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)     /* memtest */
 225                                                                 /* works on */
 226 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 227                                         0x01F00000) /* 31MB */
 228
 229 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)     /* default */
 230                                                         /* load address */
 231
 232 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)
 233
 234 /*
 235  * OMAP3 has 12 GP timers, they can be driven by the system clock
 236  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 237  * This rate is divided by a local divisor.
 238  */
 239 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 240 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 241
 242 /*
 243  * Physical Memory Map
 244  *
 245  */
 246 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 247 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 248 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 249
 250 /*
 251  * FLASH and environment organization
 252  */
 253
 254 #ifdef CONFIG_BOOT_ONENAND
 255 #define PISMO1_ONEN_SIZE                GPMC_SIZE_128M /* Configure the PISMO */
 256
 257 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 258
 259 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 260
 261 #define CONFIG_ENV_IS_IN_ONENAND        1
 262 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 263 #define CONFIG_ENV_ADDR                 ONENAND_ENV_OFFSET
 264 #endif
 265
 266 #ifdef CONFIG_BOOT_NAND
 267 #define PISMO1_NAND_SIZE                GPMC_SIZE_128M /* Configure the PISMO */
 268 #define CONFIG_NAND_OMAP_GPMC
 269 #define CONFIG_SYS_NAND_BASE            NAND_BASE
 270 #define GPMC_NAND_ECC_LP_x16_LAYOUT     1
 271 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 272 #define CONFIG_ENV_IS_IN_NAND           1
 273 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 274 #define CONFIG_ENV_ADDR                 NAND_ENV_OFFSET
 275 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 276 #endif
 277
 278 /*
 279  * Size of malloc() pool
 280  */
 281 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
 282
 283 /*
 284  * SMSC911x Ethernet
 285  */
 286 #if defined(CONFIG_CMD_NET)
 287 #define CONFIG_SMC911X
 288 #define CONFIG_SMC911X_32_BIT
 289 #define CONFIG_SMC911X_BASE     0x2C000000
 290 #endif /* (CONFIG_CMD_NET) */
 291
 292 /*
 293  * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
 294  * and older u-boot.bin with the new U-Boot SPL.
 295  */
 296 #define CONFIG_SYS_TEXT_BASE            0x80008000
 297 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 298 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 299 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 300 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 301                                          CONFIG_SYS_INIT_RAM_SIZE - \
 302                                          GENERATED_GBL_DATA_SIZE)
 303
 304 /* SPL */
 305 #define CONFIG_SPL
 306 #define CONFIG_SPL_FRAMEWORK
 307 #define CONFIG_SPL_NAND_SIMPLE
 308 #define CONFIG_SPL_TEXT_BASE            0x40200800
 309 #define CONFIG_SPL_MAX_SIZE             (54 * 1024)
 310 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 311
 312 /* move malloc and bss high to prevent clashing with the main image */
 313 #define CONFIG_SYS_SPL_MALLOC_START     0x87000000
 314 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 315 #define CONFIG_SPL_BSS_START_ADDR       0x87080000      /* end of minimum RAM */
 316 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 317
 318 /* MMC boot config */
 319 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 320 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
 321 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
 322 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
 323
 324 #define CONFIG_SPL_BOARD_INIT
 325 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 326 #define CONFIG_SPL_LIBDISK_SUPPORT
 327 #define CONFIG_SPL_I2C_SUPPORT
 328 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 329 #define CONFIG_SPL_MMC_SUPPORT
 330 #define CONFIG_SPL_FAT_SUPPORT
 331 #define CONFIG_SPL_SERIAL_SUPPORT
 332
 333 #define CONFIG_SPL_POWER_SUPPORT
 334 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 335
 336 #ifdef CONFIG_BOOT_ONENAND
 337 #define CONFIG_SPL_ONENAND_SUPPORT
 338
 339 /* OneNAND boot config */
 340 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
 341 #define CONFIG_SYS_ONENAND_PAGE_SIZE    2048
 342 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
 343 #define CONFIG_SPL_ONENAND_LOAD_SIZE    \
 344         (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
 345
 346 #endif
 347
 348 #ifdef CONFIG_BOOT_NAND
 349 #define CONFIG_SPL_NAND_SUPPORT
 350 #define CONFIG_SPL_NAND_BASE
 351 #define CONFIG_SPL_NAND_DRIVERS
 352 #define CONFIG_SPL_NAND_ECC
 353
 354 /* NAND boot config */
 355 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 356 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 357 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 358 #define CONFIG_SYS_NAND_OOBSIZE         64
 359 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 360 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 361 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
 362                                                 10, 11, 12, 13}
 363 #define CONFIG_SYS_NAND_ECCSIZE         512
 364 #define CONFIG_SYS_NAND_ECCBYTES        3
 365 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 366 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 367 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 368 #endif
 369
 370 #endif /* __IGEP00X0_H */