]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/pb1x00.h
karo: tx6: enable GPT command
[karo-tx-uboot.git] / include / configs / pb1x00.h
1 /*
2  * (C) Copyright 2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * This file contains the configuration parameters for the dbau1x00 board.
10  */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 #define CONFIG_PB1X00           1
16 #define CONFIG_SOC_AU1X00       1  /* alchemy series cpu */
17
18 #define CONFIG_DISPLAY_BOARDINFO
19
20 #ifdef CONFIG_PB1000
21 #define CONFIG_SOC_AU1000       1
22 #else
23 #ifdef CONFIG_PB1100
24 #define CONFIG_SOC_AU1100       1
25 #else
26 #ifdef CONFIG_PB1500
27 #define CONFIG_SOC_AU1500       1
28 #else
29 #error "No valid board set"
30 #endif
31 #endif
32 #endif
33
34 #define CONFIG_BOOTDELAY        2       /* autoboot after 2 seconds     */
35
36 #define CONFIG_BAUDRATE         115200
37
38 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
39 #undef  CONFIG_BOOTARGS
40
41 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
42         "addmisc=setenv bootargs ${bootargs} "                          \
43                 "console=ttyS0,${baudrate} "                            \
44                 "panic=1\0"                                             \
45         "bootfile=/vmlinux.img\0"                               \
46         "load=tftp 80500000 ${u-boot}\0"                                \
47         ""
48 /* Boot from NFS root */
49 #define CONFIG_BOOTCOMMAND      "bootp; setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm"
50
51 /*
52  * Miscellaneous configurable options
53  */
54 #define CONFIG_SYS_LONGHELP                             /* undef to save memory      */
55 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size   */
56 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
57 #define CONFIG_SYS_MAXARGS              16              /* max number of command args*/
58
59 #define CONFIG_SYS_MALLOC_LEN           128*1024
60
61 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
62
63 #define CONFIG_SYS_MIPS_TIMER_FREQ      396000000
64
65 #define CONFIG_SYS_SDRAM_BASE           0x80000000     /* Cached addr */
66
67 #define CONFIG_SYS_LOAD_ADDR            0x81000000     /* default load address  */
68
69 #define CONFIG_SYS_MEMTEST_START        0x80100000
70 #undef CONFIG_SYS_MEMTEST_START
71 #define CONFIG_SYS_MEMTEST_START       0x80200000
72 #define CONFIG_SYS_MEMTEST_END          0x83800000
73
74 /*-----------------------------------------------------------------------
75  * FLASH and environment organization
76  */
77 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks */
78 #define CONFIG_SYS_MAX_FLASH_SECT       (128)   /* max number of sectors on one chip */
79
80 #define PHYS_FLASH_1            0xbec00000 /* Flash Bank #1 */
81 #define PHYS_FLASH_2            0xbfc00000 /* Flash Bank #2 */
82
83 /* The following #defines are needed to get flash environment right */
84 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
85 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
86
87 #define CONFIG_SYS_INIT_SP_OFFSET       0x4000000
88
89 /* We boot from this flash, selected with dip switch */
90 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_2
91
92 /* timeout values are in ticks */
93 #define CONFIG_SYS_FLASH_ERASE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
94 #define CONFIG_SYS_FLASH_WRITE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
95
96 #define CONFIG_ENV_IS_NOWHERE   1
97
98 /* Address and size of Primary Environment Sector       */
99 #define CONFIG_ENV_ADDR         0xB0030000
100 #define CONFIG_ENV_SIZE         0x10000
101
102 #define CONFIG_FLASH_16BIT
103
104 #define CONFIG_NR_DRAM_BANKS    2
105
106
107 #define CONFIG_MEMSIZE_IN_BYTES
108
109
110 /*---USB -------------------------------------------*/
111 #if 0
112 #define CONFIG_USB_OHCI
113 #define CONFIG_USB_STORAGE
114 #define CONFIG_DOS_PARTITION
115 #endif
116
117 /*---ATA PCMCIA ------------------------------------*/
118 #if 0
119 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
120 #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
121 #define CONFIG_PCMCIA_SLOT_A
122
123 #define CONFIG_ATAPI 1
124 #define CONFIG_MAC_PARTITION 1
125
126 /* We run CF in "true ide" mode or a harddrive via pcmcia */
127 #define CONFIG_IDE_PCMCIA 1
128
129 /* We only support one slot for now */
130 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
131 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
132
133 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
134 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
135
136 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
137
138 #define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
139
140 /* Offset for data I/O                  */
141 #define CONFIG_SYS_ATA_DATA_OFFSET     8
142
143 /* Offset for normal register accesses  */
144 #define CONFIG_SYS_ATA_REG_OFFSET      0
145
146 /* Offset for alternate registers       */
147 #define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
148
149 #endif
150 /*-----------------------------------------------------------------------
151  * Cache Configuration
152  */
153 #define CONFIG_SYS_DCACHE_SIZE          16384
154 #define CONFIG_SYS_ICACHE_SIZE          16384
155 #define CONFIG_SYS_CACHELINE_SIZE       32
156
157
158 /*
159  * BOOTP options
160  */
161 #define CONFIG_BOOTP_BOOTFILESIZE
162 #define CONFIG_BOOTP_BOOTPATH
163 #define CONFIG_BOOTP_GATEWAY
164 #define CONFIG_BOOTP_HOSTNAME
165
166
167 /*
168  * Command line configuration.
169  */
170 #define CONFIG_CMD_DHCP
171 #define CONFIG_CMD_ELF
172 #define CONFIG_CMD_MII
173 #define CONFIG_CMD_PING
174
175 #undef CONFIG_CMD_FAT
176 #undef CONFIG_CMD_IDE
177 #undef CONFIG_CMD_ELF
178 #undef CONFIG_CMD_BEDBUG
179
180 #endif  /* __CONFIG_H */