]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/qemu-mips.h
at91sam9260ek: move board id setup to config header
[karo-tx-uboot.git] / include / configs / qemu-mips.h
1 /*
2  * (C) Copyright 2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 /*
25  * This file contains the configuration parameters for qemu-mips target.
26  */
27
28 #ifndef __CONFIG_H
29 #define __CONFIG_H
30
31 #define CONFIG_MIPS32                   /* MIPS32 CPU core */
32 #define CONFIG_QEMU_MIPS
33 #define CONFIG_MISC_INIT_R
34
35 #define CONFIG_BOOTDELAY        10      /* autoboot after 10 seconds */
36
37 #define CONFIG_BAUDRATE         115200
38
39 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
40 #undef CONFIG_BOOTARGS
41
42 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
43         "addmisc=setenv bootargs ${bootargs} "                          \
44                 "console=ttyS0,${baudrate} "                            \
45                 "panic=1\0"                                             \
46         "bootfile=/tftpboot/vmlinux\0"                          \
47         "load=tftp 80500000 ${u-boot}\0"                                \
48         ""
49
50 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
51
52 /*
53  * BOOTP options
54  */
55 #define CONFIG_BOOTP_BOOTFILESIZE
56 #define CONFIG_BOOTP_BOOTPATH
57 #define CONFIG_BOOTP_GATEWAY
58 #define CONFIG_BOOTP_HOSTNAME
59
60 /*
61  * Command line configuration.
62  */
63 #include <config_cmd_default.h>
64
65 #define CONFIG_CMD_ELF
66 #define CONFIG_CMD_FAT
67 #define CONFIG_CMD_EXT2
68 #undef CONFIG_CMD_LOADB
69 #undef CONFIG_CMD_LOADS
70 #define CONFIG_CMD_DHCP
71
72 #define CONFIG_DRIVER_NE2000
73 #define CONFIG_DRIVER_NE2000_BASE       0xb4000300
74
75 #define CONFIG_SYS_NS16550
76 #define CONFIG_SYS_NS16550_SERIAL
77 #define CONFIG_SYS_NS16550_REG_SIZE     1
78 #define CONFIG_SYS_NS16550_CLK          115200
79 #define CONFIG_SYS_NS16550_COM1         0xb40003f8
80 #define CONFIG_CONS_INDEX               1
81
82 #define CONFIG_CMD_IDE
83 #define CONFIG_DOS_PARTITION
84
85 #define CONFIG_SYS_IDE_MAXBUS           2
86 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
87 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
88 #define CONFIG_SYS_ATA_DATA_OFFSET      0
89 #define CONFIG_SYS_ATA_REG_OFFSET       0
90 #define CONFIG_SYS_ATA_BASE_ADDR        0xb4000000
91
92 #define CONFIG_SYS_IDE_MAXDEVICE        4
93
94 /*
95  * Miscellaneous configurable options
96  */
97 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
98
99 /* Monitor Command Prompt */
100 #if defined(CONFIG_SYS_LITTLE_ENDIAN)
101 #define CONFIG_SYS_PROMPT               "qemu-mipsel # "
102 #else
103 #define CONFIG_SYS_PROMPT               "qemu-mips # "
104 #endif
105
106 #define CONFIG_AUTO_COMPLETE
107 #define CONFIG_CMDLINE_EDITING
108 #define CONFIG_SYS_HUSH_PARSER
109
110 /* Console I/O Buffer Size */
111 #define CONFIG_SYS_CBSIZE               256
112 /* Print Buffer Size */
113 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
114 /* max number of command args */
115 #define CONFIG_SYS_MAXARGS              16
116
117 #define CONFIG_SYS_MALLOC_LEN           128*1024
118
119 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
120
121 #define CONFIG_SYS_MHZ                  132
122
123 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
124
125 #define CONFIG_SYS_HZ                   1000
126
127 /* Cached addr */
128 #define CONFIG_SYS_SDRAM_BASE           0x80000000
129
130 /* default load address */
131 #define CONFIG_SYS_LOAD_ADDR            0x81000000
132
133 #define CONFIG_SYS_MEMTEST_START        0x80100000
134 #define CONFIG_SYS_MEMTEST_END          0x80800000
135
136 /*-----------------------------------------------------------------------
137  * FLASH and environment organization
138  */
139 /* The following #defines are needed to get flash environment right */
140 #define CONFIG_SYS_TEXT_BASE            0xbfc00000 /* Rom version */
141 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
142 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
143
144 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
145
146 /* We boot from this flash, selected with dip switch */
147 #define CONFIG_SYS_FLASH_BASE           0xbfc00000
148 #define CONFIG_SYS_MAX_FLASH_BANKS      1
149 #define CONFIG_SYS_MAX_FLASH_SECT       128
150 #define CONFIG_SYS_FLASH_CFI
151 #define CONFIG_FLASH_CFI_DRIVER
152 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
153
154 #define CONFIG_ENV_IS_IN_FLASH
155 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
156
157 /* Address and size of Primary Environment Sector */
158 #define CONFIG_ENV_SIZE         0x8000
159
160 #define CONFIG_ENV_OVERWRITE    1
161
162 #define MEM_SIZE                128
163
164 #define CONFIG_LZMA
165
166 /*-----------------------------------------------------------------------
167  * Cache Configuration
168  */
169 #define CONFIG_SYS_DCACHE_SIZE          16384
170 #define CONFIG_SYS_ICACHE_SIZE          16384
171 #define CONFIG_SYS_CACHELINE_SIZE       32
172
173 #endif /* __CONFIG_H */