]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/r2dplus.h
at91: enable USB ethernet for taskit stamp9g20
[karo-tx-uboot.git] / include / configs / r2dplus.h
1 #ifndef __CONFIG_H
2 #define __CONFIG_H
3
4 #undef DEBUG
5
6 #define CONFIG_CPU_SH7751       1
7 #define CONFIG_CPU_SH_TYPE_R    1
8 #define CONFIG_R2DPLUS          1
9 #define __LITTLE_ENDIAN__       1
10
11 /*
12  * Command line configuration.
13  */
14 #include <config_cmd_default.h>
15
16 #define CONFIG_CMD_CACHE
17 #define CONFIG_CMD_FLASH
18 #define CONFIG_CMD_PCI
19 #define CONFIG_CMD_NET
20 #define CONFIG_CMD_PING
21 #define CONFIG_CMD_IDE
22 #define CONFIG_CMD_EXT2
23 #define CONFIG_DOS_PARTITION
24 #define CONFIG_CMD_SH_ZIMAGEBOOT
25
26 /* SCIF */
27 #define CONFIG_SCIF_CONSOLE     1
28 #define CONFIG_BAUDRATE         115200
29 #define CONFIG_CONS_SCIF1       1
30 #define CONFIG_BOARD_LATE_INIT
31
32 #define CONFIG_BOOTDELAY        -1
33 #define CONFIG_BOOTARGS         "console=ttySC0,115200"
34 #define CONFIG_ENV_OVERWRITE    1
35
36 /* SDRAM */
37 #define CONFIG_SYS_SDRAM_BASE           (0x8C000000)
38 #define CONFIG_SYS_SDRAM_SIZE           (0x04000000)
39
40 #define CONFIG_SYS_TEXT_BASE    0x0FFC0000
41 #define CONFIG_SYS_LONGHELP
42 #define CONFIG_SYS_CBSIZE               256
43 #define CONFIG_SYS_PBSIZE               256
44 #define CONFIG_SYS_MAXARGS              16
45 #define CONFIG_SYS_BARGSIZE             512
46
47 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE)
48 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_TEXT_BASE - 0x100000)
49
50 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
51 /* Address of u-boot image in Flash */
52 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
53 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)
54 /* Size of DRAM reserved for malloc() use */
55 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
56 #define CONFIG_SYS_BOOTMAPSZ            (8 * 1024 * 1024)
57
58 /*
59  * NOR Flash ( Spantion S29GL256P )
60  */
61 #define CONFIG_SYS_FLASH_CFI
62 #define CONFIG_FLASH_CFI_DRIVER
63 #define CONFIG_SYS_FLASH_BASE           (0xA0000000)
64 #define CONFIG_SYS_MAX_FLASH_BANKS (1)
65 #define CONFIG_SYS_MAX_FLASH_SECT  256
66 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
67
68 #define CONFIG_ENV_IS_IN_FLASH
69 #define CONFIG_ENV_SECT_SIZE    0x40000
70 #define CONFIG_ENV_SIZE        (CONFIG_ENV_SECT_SIZE)
71 #define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
72
73 /*
74  * SuperH Clock setting
75  */
76 #define CONFIG_SYS_CLK_FREQ     60000000
77 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
78 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
79 #define CONFIG_SYS_TMU_CLK_DIV          4
80 #define CONFIG_SYS_PLL_SETTLING_TIME    100/* in us */
81
82 /*
83  * IDE support
84  */
85 #define CONFIG_IDE_RESET        1
86 #define CONFIG_SYS_PIO_MODE             1
87 #define CONFIG_SYS_IDE_MAXBUS           1 /* IDE bus */
88 #define CONFIG_SYS_IDE_MAXDEVICE        1
89 #define CONFIG_SYS_ATA_BASE_ADDR        0xb4000000
90 #define CONFIG_SYS_ATA_STRIDE           2 /* 1bit shift */
91 #define CONFIG_SYS_ATA_DATA_OFFSET      0x1000  /* data reg offset */
92 #define CONFIG_SYS_ATA_REG_OFFSET       0x1000  /* reg offset */
93 #define CONFIG_SYS_ATA_ALT_OFFSET       0x800   /* alternate register offset */
94 #define CONFIG_IDE_SWAP_IO
95
96 /*
97  * SuperH PCI Bridge Configration
98  */
99 #define CONFIG_PCI
100 #define CONFIG_SH4_PCI
101 #define CONFIG_SH7751_PCI
102 #define CONFIG_PCI_PNP
103 #define CONFIG_PCI_SCAN_SHOW    1
104 #define __io
105 #define __mem_pci
106
107 #define CONFIG_PCI_MEM_BUS      0xFD000000      /* Memory space base addr */
108 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
109 #define CONFIG_PCI_MEM_SIZE     0x01000000      /* Size of Memory window */
110 #define CONFIG_PCI_IO_BUS       0xFE240000      /* IO space base address */
111 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
112 #define CONFIG_PCI_IO_SIZE      0x00040000      /* Size of IO window */
113 #define CONFIG_PCI_SYS_BUS      (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
114 #define CONFIG_PCI_SYS_PHYS     (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
115 #define CONFIG_PCI_SYS_SIZE     CONFIG_SYS_SDRAM_SIZE
116
117 /*
118  * Network device (RTL8139) support
119  */
120 #define CONFIG_RTL8139
121
122 #endif /* __CONFIG_H */