include/configs/rastaban.h

   1 /*
   2  * (C) Copyright 2013 Siemens Schweiz AG
   3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * Based on:
   6  * U-Boot file:/include/configs/am335x_evm.h
   7  *
   8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_RASTABAN_H
  14 #define __CONFIG_RASTABAN_H
  15
  16 #include "siemens-am33x-common.h"
  17
  18 #define CONFIG_DISPLAY_CPUINFO
  19 #define CONFIG_SYS_MPUCLK       300
  20 #define DDR_PLL_FREQ    303
  21 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
  22
  23 /* FWD Button = 27
  24  * SRV Button = 87 */
  25 #define BOARD_DFU_BUTTON_GPIO   27
  26 #define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
  27 /* In dfu mode keep led1 on */
  28 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  29         "button_dfu0=27\0" \
  30         "button_dfu1=87\0" \
  31         "led0=3,0,1\0" \
  32         "led1=4,0,0\0" \
  33         "led2=5,0,1\0" \
  34         "led3=62,0,1\0" \
  35         "led4=60,0,1\0" \
  36         "led5=63,0,1\0"
  37
  38 #undef CONFIG_DOS_PARTITION
  39 #undef CONFIG_CMD_FAT
  40
  41 #define CONFIG_BOARD_LATE_INIT
  42
  43  /* Physical Memory Map */
  44 #define CONFIG_MAX_RAM_BANK_SIZE        (1024 << 20)    /* 1GB */
  45
  46 /* I2C Configuration */
  47 #define CONFIG_SYS_I2C_SPEED            100000
  48
  49 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
  50 #define EEPROM_ADDR_DDR3 0x90
  51 #define EEPROM_ADDR_CHIP 0x120
  52
  53 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
  54
  55 #undef CONFIG_SPL_NET_SUPPORT
  56 #undef CONFIG_SPL_NET_VCI_STRING
  57 #undef CONFIG_SPL_ETH_SUPPORT
  58
  59 #undef CONFIG_MII
  60 #undef CONFIG_PHY_GIGE
  61 #define CONFIG_PHY_SMSC
  62
  63 #define CONFIG_FACTORYSET
  64
  65 /* Watchdog */
  66 #define CONFIG_OMAP_WATCHDOG
  67
  68 /* Define own nand partitions */
  69 #define CONFIG_ENV_OFFSET_REDUND        0x2E0000
  70 #define CONFIG_ENV_SIZE_REDUND          0x2000
  71 #define CONFIG_ENV_RANGE                (4 * CONFIG_SYS_ENV_SECT_SIZE)
  72
  73
  74
  75 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V3
  76
  77 #ifndef CONFIG_SPL_BUILD
  78
  79 /* Default env settings */
  80 #define CONFIG_EXTRA_ENV_SETTINGS \
  81         "hostname=rastaban\0" \
  82         "nand_img_size=0x400000\0" \
  83         "optargs=\0" \
  84         "preboot=draco_led 0\0" \
  85         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  86         CONFIG_ENV_SETTINGS_V2 \
  87         CONFIG_ENV_SETTINGS_NAND_V2
  88
  89 #ifndef CONFIG_RESTORE_FLASH
  90 /* set to negative value for no autoboot */
  91 #define CONFIG_BOOTDELAY                3
  92
  93 #define CONFIG_BOOTCOMMAND \
  94 "if dfubutton; then " \
  95         "run dfu_start; " \
  96         "reset; " \
  97 "fi;" \
  98 "run nand_boot;" \
  99 "run nand_boot_backup;" \
 100 "reset;"
 101
 102
 103 #else
 104 #define CONFIG_BOOTDELAY                0
 105
 106 #define CONFIG_BOOTCOMMAND                      \
 107         "setenv autoload no; "                  \
 108         "dhcp; "                                \
 109         "if tftp 80000000 debrick.scr; then "   \
 110                 "source 80000000; "             \
 111         "fi"
 112 #endif
 113 #endif  /* CONFIG_SPL_BUILD */
 114 #endif  /* ! __CONFIG_RASTABAN_H */