include/configs/sama5d3xek.h

   1 /*
   2  * Configuation settings for the SAMA5D3xEK board.
   3  *
   4  * Copyright (C) 2012 - 2013 Atmel
   5  *
   6  * based on at91sam9m10g45ek.h by:
   7  * Stelian Pop <stelian@popies.net>
   8  * Lead Tech Design <www.leadtechdesign.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/hardware.h>
  17
  18 #define CONFIG_SYS_TEXT_BASE            0x26f00000
  19
  20 /* ARM asynchronous clock */
  21 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  22 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
  23 #define CONFIG_SYS_HZ                   1000
  24
  25 #define CONFIG_AT91FAMILY
  26 #define CONFIG_ARCH_CPU_INIT
  27
  28 #define CONFIG_SKIP_LOWLEVEL_INIT
  29 #define CONFIG_BOARD_EARLY_INIT_F
  30 #define CONFIG_DISPLAY_CPUINFO
  31
  32 #define CONFIG_CMD_BOOTZ
  33 #define CONFIG_OF_LIBFDT                /* Device Tree support */
  34
  35 /* general purpose I/O */
  36 #define CONFIG_AT91_GPIO
  37
  38 /* serial console */
  39 #define CONFIG_ATMEL_USART
  40 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  41 #define CONFIG_USART_ID                 ATMEL_ID_DBGU
  42
  43 /*
  44  * This needs to be defined for the OHCI code to work but it is defined as
  45  * ATMEL_ID_UHPHS in the CPU specific header files.
  46  */
  47 #define ATMEL_ID_UHP                    ATMEL_ID_UHPHS
  48
  49 /*
  50  * Specify the clock enable bit in the PMC_SCER register.
  51  */
  52 #define ATMEL_PMC_UHP                   AT91SAM926x_PMC_UHP
  53
  54 /* LCD */
  55 #define CONFIG_LCD
  56 #define LCD_BPP                         LCD_COLOR16
  57 #define LCD_OUTPUT_BPP                  24
  58 #define CONFIG_LCD_LOGO
  59 #undef LCD_TEST_PATTERN
  60 #define CONFIG_LCD_INFO
  61 #define CONFIG_LCD_INFO_BELOW_LOGO
  62 #define CONFIG_SYS_WHITE_ON_BLACK
  63 #define CONFIG_ATMEL_HLCD
  64 #define CONFIG_ATMEL_LCD_RGB565
  65 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  66
  67 /* board specific (not enough SRAM) */
  68 #define CONFIG_SAMA5D3_LCD_BASE         0x23E00000
  69
  70 #define CONFIG_BOOTDELAY                3
  71
  72 /*
  73  * BOOTP options
  74  */
  75 #define CONFIG_BOOTP_BOOTFILESIZE
  76 #define CONFIG_BOOTP_BOOTPATH
  77 #define CONFIG_BOOTP_GATEWAY
  78 #define CONFIG_BOOTP_HOSTNAME
  79
  80 /* No NOR flash */
  81 #define CONFIG_SYS_NO_FLASH
  82
  83 /*
  84  * Command line configuration.
  85  */
  86 #include <config_cmd_default.h>
  87 #undef CONFIG_CMD_FPGA
  88 #undef CONFIG_CMD_IMI
  89 #undef CONFIG_CMD_LOADS
  90 #define CONFIG_CMD_PING
  91 #define CONFIG_CMD_DHCP
  92
  93 /* SDRAM */
  94 #define CONFIG_NR_DRAM_BANKS            1
  95 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  96 #define CONFIG_SYS_SDRAM_SIZE           0x20000000
  97
  98 #define CONFIG_SYS_INIT_SP_ADDR \
  99         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
 100
 101 /* SerialFlash */
 102 #define CONFIG_CMD_SF
 103
 104 #ifdef CONFIG_CMD_SF
 105 #define CONFIG_ATMEL_SPI
 106 #define CONFIG_SPI_FLASH
 107 #define CONFIG_SPI_FLASH_ATMEL
 108 #define CONFIG_SF_DEFAULT_SPEED         30000000
 109 #endif
 110
 111 /* NAND flash */
 112 #define CONFIG_CMD_NAND
 113
 114 #ifdef CONFIG_CMD_NAND
 115 #define CONFIG_NAND_MAX_CHIPS           1
 116 #define CONFIG_NAND_ATMEL
 117 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 118 #define CONFIG_SYS_NAND_BASE            ATMEL_BASE_CS3
 119 /* our ALE is AD21 */
 120 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
 121 /* our CLE is AD22 */
 122 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
 123 #define CONFIG_SYS_NAND_ONFI_DETECTION
 124 /* PMECC & PMERRLOC */
 125 #define CONFIG_ATMEL_NAND_HWECC
 126 #define CONFIG_ATMEL_NAND_HW_PMECC
 127 #define CONFIG_PMECC_CAP                4
 128 #define CONFIG_PMECC_SECTOR_SIZE        512
 129 #define CONFIG_CMD_NAND_TRIMFFS
 130 #endif
 131
 132 /* Ethernet Hardware */
 133 #define CONFIG_MACB
 134 #define CONFIG_RMII
 135 #define CONFIG_NET_MULTI
 136 #define CONFIG_NET_RETRY_COUNT          20
 137 #define CONFIG_MACB_SEARCH_PHY
 138 #define CONFIG_RGMII
 139 #define CONFIG_CMD_MII
 140 #define CONFIG_PHYLIB
 141 #define CONFIG_PHY_MICREL
 142 #define CONFIG_PHY_MICREL_KSZ9021
 143
 144 /* MMC */
 145 #define CONFIG_CMD_MMC
 146
 147 #ifdef CONFIG_CMD_MMC
 148 #define CONFIG_MMC
 149 #define CONFIG_GENERIC_MMC
 150 #define CONFIG_GENERIC_ATMEL_MCI
 151 #define ATMEL_BASE_MMCI                 ATMEL_BASE_MCI0
 152 #endif
 153
 154 /* USB */
 155 #define CONFIG_CMD_USB
 156
 157 #ifdef CONFIG_CMD_USB
 158 #define CONFIG_USB_ATMEL
 159 #define CONFIG_USB_OHCI_NEW
 160 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 161 #define CONFIG_SYS_USB_OHCI_REGS_BASE           ATMEL_BASE_OHCI
 162 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "sama5d3"
 163 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      3
 164 #define CONFIG_DOS_PARTITION
 165 #define CONFIG_USB_STORAGE
 166 #endif
 167
 168 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
 169 #define CONFIG_CMD_FAT
 170 #endif
 171
 172 #define CONFIG_SYS_LOAD_ADDR                    0x22000000 /* load address */
 173
 174 #ifdef CONFIG_SYS_USE_SERIALFLASH
 175 /* bootstrap + u-boot + env + linux in serial flash */
 176 #define CONFIG_ENV_IS_IN_SPI_FLASH
 177 #define CONFIG_ENV_OFFSET       0x5000
 178 #define CONFIG_ENV_SIZE         0x3000
 179 #define CONFIG_ENV_SECT_SIZE    0x1000
 180 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 181                                 "sf read 0x22000000 0x42000 0x300000; " \
 182                                 "bootm 0x22000000"
 183 #elif CONFIG_SYS_USE_NANDFLASH
 184 /* bootstrap + u-boot + env in nandflash */
 185 #define CONFIG_ENV_IS_IN_NAND
 186 #define CONFIG_ENV_OFFSET               0xc0000
 187 #define CONFIG_ENV_OFFSET_REDUND        0x100000
 188 #define CONFIG_ENV_SIZE                 0x20000
 189 #define CONFIG_BOOTCOMMAND      "nand read 0x21000000 0x180000 0x80000;" \
 190                                 "nand read 0x22000000 0x200000 0x600000;" \
 191                                 "bootm 0x22000000 - 0x21000000"
 192 #elif CONFIG_SYS_USE_MMC
 193 /* bootstrap + u-boot + env in sd card */
 194 #define CONFIG_ENV_IS_IN_MMC
 195 #define CONFIG_ENV_OFFSET       0x2000
 196 #define CONFIG_ENV_SIZE         0x1000
 197 #define CONFIG_BOOTCOMMAND      "fatload mmc 0:1 0x21000000 dtb; " \
 198                                 "fatload mmc 0:1 0x22000000 uImage; " \
 199                                 "bootm 0x22000000 - 0x21000000"
 200 #define CONFIG_SYS_MMC_ENV_DEV  0
 201 #else
 202 #define CONIG_ENV_IS_NOWHERE
 203 #endif
 204
 205 #ifdef CONFIG_SYS_USE_MMC
 206 #define CONFIG_BOOTARGS                                                 \
 207         "console=ttyS0,115200 earlyprintk "                             \
 208         "root=/dev/mmcblk0p2 rw rootwait"
 209 #else
 210 #define CONFIG_BOOTARGS                                                 \
 211         "console=ttyS0,115200 earlyprintk "                             \
 212         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
 213         "256K(env),256k(evn_redundent),256k(spare),"                    \
 214         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
 215         "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
 216 #endif
 217
 218 #define CONFIG_BAUDRATE                 115200
 219
 220 #define CONFIG_SYS_PROMPT               "U-Boot> "
 221 #define CONFIG_SYS_CBSIZE               256
 222 #define CONFIG_SYS_MAXARGS              16
 223 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 224                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 225 #define CONFIG_SYS_LONGHELP
 226 #define CONFIG_CMDLINE_EDITING
 227 #define CONFIG_AUTO_COMPLETE
 228 #define CONFIG_SYS_HUSH_PARSER
 229
 230 /* Size of malloc() pool */
 231 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 232
 233 #endif