include/configs/t4qds.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #ifdef CONFIG_RAMBOOT_PBL
  14 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  15 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  16 #define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
  17 #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
  18 #endif
  19
  20 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  21 /* Set 1M boot space */
  22 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  23 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  24                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  25 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  26 #define CONFIG_SYS_NO_FLASH
  27 #endif
  28
  29 #define CONFIG_CMD_REGINFO
  30
  31 /* High Level Configuration Options */
  32 #define CONFIG_BOOKE
  33 #define CONFIG_E500                     /* BOOKE e500 family */
  34 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  35 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  36 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  37 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  38 #define CONFIG_MP                       /* support multiple processors */
  39
  40 #ifndef CONFIG_SYS_TEXT_BASE
  41 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  42 #endif
  43
  44 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  45 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  46 #endif
  47
  48 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  49 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  50 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  51 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  52 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  53 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  54 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  55 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  56 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  57
  58 #define CONFIG_SYS_SRIO
  59 #define CONFIG_SRIO1                    /* SRIO port 1 */
  60 #define CONFIG_SRIO2                    /* SRIO port 2 */
  61 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  62
  63 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  64
  65 #define CONFIG_ENV_OVERWRITE
  66
  67 #ifdef CONFIG_SYS_NO_FLASH
  68 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  69 #define CONFIG_ENV_IS_NOWHERE
  70 #endif
  71 #else
  72 #define CONFIG_FLASH_CFI_DRIVER
  73 #define CONFIG_SYS_FLASH_CFI
  74 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  75 #endif
  76
  77 #if defined(CONFIG_SPIFLASH)
  78 #define CONFIG_SYS_EXTRA_ENV_RELOC
  79 #define CONFIG_ENV_IS_IN_SPI_FLASH
  80 #define CONFIG_ENV_SPI_BUS              0
  81 #define CONFIG_ENV_SPI_CS               0
  82 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  83 #define CONFIG_ENV_SPI_MODE             0
  84 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  85 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  86 #define CONFIG_ENV_SECT_SIZE            0x10000
  87 #elif defined(CONFIG_SDCARD)
  88 #define CONFIG_SYS_EXTRA_ENV_RELOC
  89 #define CONFIG_ENV_IS_IN_MMC
  90 #define CONFIG_SYS_MMC_ENV_DEV          0
  91 #define CONFIG_ENV_SIZE                 0x2000
  92 #define CONFIG_ENV_OFFSET               (512 * 1097)
  93 #elif defined(CONFIG_NAND)
  94 #define CONFIG_SYS_EXTRA_ENV_RELOC
  95 #define CONFIG_ENV_IS_IN_NAND
  96 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  97 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
  98 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  99 #define CONFIG_ENV_IS_IN_REMOTE
 100 #define CONFIG_ENV_ADDR         0xffe20000
 101 #define CONFIG_ENV_SIZE         0x2000
 102 #elif defined(CONFIG_ENV_IS_NOWHERE)
 103 #define CONFIG_ENV_SIZE         0x2000
 104 #else
 105 #define CONFIG_ENV_IS_IN_FLASH
 106 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 107 #define CONFIG_ENV_SIZE         0x2000
 108 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 109 #endif
 110
 111 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 112 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 113
 114 #ifndef __ASSEMBLY__
 115 unsigned long get_board_sys_clk(void);
 116 unsigned long get_board_ddr_clk(void);
 117 #endif
 118
 119 /*
 120  * These can be toggled for performance analysis, otherwise use default.
 121  */
 122 #define CONFIG_SYS_CACHE_STASHING
 123 #define CONFIG_BTB                      /* toggle branch predition */
 124 #define CONFIG_DDR_ECC
 125 #ifdef CONFIG_DDR_ECC
 126 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 127 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 128 #endif
 129
 130 #define CONFIG_ENABLE_36BIT_PHYS
 131
 132 #ifdef CONFIG_PHYS_64BIT
 133 #define CONFIG_ADDR_MAP
 134 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 135 #endif
 136
 137 #if 0
 138 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 139 #endif
 140 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 141 #define CONFIG_SYS_MEMTEST_END          0x00400000
 142 #define CONFIG_SYS_ALT_MEMTEST
 143 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 144
 145 /*
 146  *  Config the L3 Cache as L3 SRAM
 147  */
 148 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 149
 150 #ifdef CONFIG_PHYS_64BIT
 151 #define CONFIG_SYS_DCSRBAR              0xf0000000
 152 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 153 #endif
 154
 155 /* EEPROM */
 156 #define CONFIG_ID_EEPROM
 157 #define CONFIG_SYS_I2C_EEPROM_NXID
 158 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 159 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 160 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 161
 162 /*
 163  * DDR Setup
 164  */
 165 #define CONFIG_VERY_BIG_RAM
 166 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 167 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 168
 169 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 170 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 171 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 172 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 173
 174 #define CONFIG_DDR_SPD
 175 #define CONFIG_FSL_DDR3
 176
 177 #define CONFIG_SYS_SPD_BUS_NUM  0
 178 #define SPD_EEPROM_ADDRESS1     0x51
 179 #define SPD_EEPROM_ADDRESS2     0x52
 180 #define SPD_EEPROM_ADDRESS3     0x53
 181 #define SPD_EEPROM_ADDRESS4     0x54
 182 #define SPD_EEPROM_ADDRESS5     0x55
 183 #define SPD_EEPROM_ADDRESS6     0x56
 184 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 185 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 186
 187 /*
 188  * IFC Definitions
 189  */
 190 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 191 #ifdef CONFIG_PHYS_64BIT
 192 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 193 #else
 194 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 195 #endif
 196
 197 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 198 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 199                                 + 0x8000000) | \
 200                                 CSPR_PORT_SIZE_16 | \
 201                                 CSPR_MSEL_NOR | \
 202                                 CSPR_V)
 203 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 204 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 205                                 CSPR_PORT_SIZE_16 | \
 206                                 CSPR_MSEL_NOR | \
 207                                 CSPR_V)
 208 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 209 /* NOR Flash Timing Params */
 210 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 211
 212 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 213                                 FTIM0_NOR_TEADC(0x5) | \
 214                                 FTIM0_NOR_TEAHC(0x5))
 215 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 216                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 217                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 218 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 219                                 FTIM2_NOR_TCH(0x4) | \
 220                                 FTIM2_NOR_TWPH(0x0E) | \
 221                                 FTIM2_NOR_TWP(0x1c))
 222 #define CONFIG_SYS_NOR_FTIM3    0x0
 223
 224 #define CONFIG_SYS_FLASH_QUIET_TEST
 225 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 226
 227 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 228 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 229 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 230 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 231
 232 #define CONFIG_SYS_FLASH_EMPTY_INFO
 233 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 234                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 235
 236 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 237 #define QIXIS_BASE                      0xffdf0000
 238 #define QIXIS_LBMAP_SWITCH              6
 239 #define QIXIS_LBMAP_MASK                0x0f
 240 #define QIXIS_LBMAP_SHIFT               0
 241 #define QIXIS_LBMAP_DFLTBANK            0x00
 242 #define QIXIS_LBMAP_ALTBANK             0x04
 243 #define QIXIS_RST_CTL_RESET             0x83
 244 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 245 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 246 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 247 #ifdef CONFIG_PHYS_64BIT
 248 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 249 #else
 250 #define QIXIS_BASE_PHYS         QIXIS_BASE
 251 #endif
 252
 253 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 254 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 255                                 | CSPR_PORT_SIZE_8 \
 256                                 | CSPR_MSEL_GPCM \
 257                                 | CSPR_V)
 258 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 259 #define CONFIG_SYS_CSOR3        0x0
 260 /* QIXIS Timing parameters for IFC CS3 */
 261 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 262                                         FTIM0_GPCM_TEADC(0x0e) | \
 263                                         FTIM0_GPCM_TEAHC(0x0e))
 264 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 265                                         FTIM1_GPCM_TRAD(0x3f))
 266 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 267                                         FTIM2_GPCM_TCH(0x0) | \
 268                                         FTIM2_GPCM_TWP(0x1f))
 269 #define CONFIG_SYS_CS3_FTIM3            0x0
 270
 271 /* NAND Flash on IFC */
 272 #define CONFIG_NAND_FSL_IFC
 273 #define CONFIG_SYS_NAND_BASE            0xff800000
 274 #ifdef CONFIG_PHYS_64BIT
 275 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 276 #else
 277 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 278 #endif
 279
 280 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 281 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 282                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 283                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 284                                 | CSPR_V)
 285 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 286
 287 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 288                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 289                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 290                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 291                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 292                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 293                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 294
 295 #define CONFIG_SYS_NAND_ONFI_DETECTION
 296
 297 /* ONFI NAND Flash mode0 Timing Params */
 298 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 299                                         FTIM0_NAND_TWP(0x18)   | \
 300                                         FTIM0_NAND_TWCHT(0x07) | \
 301                                         FTIM0_NAND_TWH(0x0a))
 302 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 303                                         FTIM1_NAND_TWBE(0x39)  | \
 304                                         FTIM1_NAND_TRR(0x0e)   | \
 305                                         FTIM1_NAND_TRP(0x18))
 306 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 307                                         FTIM2_NAND_TREH(0x0a) | \
 308                                         FTIM2_NAND_TWHRE(0x1e))
 309 #define CONFIG_SYS_NAND_FTIM3           0x0
 310
 311 #define CONFIG_SYS_NAND_DDR_LAW         11
 312
 313 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 314 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 315 #define CONFIG_MTD_NAND_VERIFY_WRITE
 316 #define CONFIG_CMD_NAND
 317
 318 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 319
 320 #if defined(CONFIG_NAND)
 321 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 322 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 323 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 324 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 325 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 326 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 327 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 328 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 329 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 330 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 331 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 332 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 333 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 334 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 335 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 336 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 337 #else
 338 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 339 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 340 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 341 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 342 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 343 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 344 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 345 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 346 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 347 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 348 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 349 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 350 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 351 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 352 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 353 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 354 #endif
 355 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 356 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 357 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 358 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 359 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 360 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 361 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 362 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 363
 364 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 365
 366 #if defined(CONFIG_RAMBOOT_PBL)
 367 #define CONFIG_SYS_RAMBOOT
 368 #endif
 369
 370 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 371 #define CONFIG_MISC_INIT_R
 372
 373 #define CONFIG_HWCONFIG
 374
 375 /* define to use L1 as initial stack */
 376 #define CONFIG_L1_INIT_RAM
 377 #define CONFIG_SYS_INIT_RAM_LOCK
 378 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 379 #ifdef CONFIG_PHYS_64BIT
 380 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 381 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 382 /* The assembler doesn't like typecast */
 383 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 384         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 385           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 386 #else
 387 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 388 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 389 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 390 #endif
 391 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 392
 393 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 394                                         GENERATED_GBL_DATA_SIZE)
 395 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 396
 397 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 398 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 399
 400 /* Serial Port - controlled on board with jumper J8
 401  * open - index 2
 402  * shorted - index 1
 403  */
 404 #define CONFIG_CONS_INDEX       1
 405 #define CONFIG_SYS_NS16550
 406 #define CONFIG_SYS_NS16550_SERIAL
 407 #define CONFIG_SYS_NS16550_REG_SIZE     1
 408 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 409
 410 #define CONFIG_SYS_BAUDRATE_TABLE       \
 411         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 412
 413 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 414 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 415 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 416 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 417
 418 /* Use the HUSH parser */
 419 #define CONFIG_SYS_HUSH_PARSER
 420 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 421
 422 /* pass open firmware flat tree */
 423 #define CONFIG_OF_LIBFDT
 424 #define CONFIG_OF_BOARD_SETUP
 425 #define CONFIG_OF_STDOUT_VIA_ALIAS
 426
 427 /* new uImage format support */
 428 #define CONFIG_FIT
 429 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 430
 431 /* I2C */
 432 #define CONFIG_SYS_I2C
 433 #define CONFIG_SYS_I2C_FSL
 434 #define CONFIG_SYS_FSL_I2C_SPEED        100000
 435 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 436 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 437 #define CONFIG_SYS_FSL_I2C2_SPEED       100000
 438 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 439 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 440
 441 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 442 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 443
 444 #define I2C_MUX_CH_DEFAULT      0x8
 445 #define I2C_MUX_CH_VOL_MONITOR  0xa
 446 #define I2C_MUX_CH_VSC3316_FS   0xc
 447 #define I2C_MUX_CH_VSC3316_BS   0xd
 448
 449 /* Voltage monitor on channel 2*/
 450 #define I2C_VOL_MONITOR_ADDR            0x40
 451 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 452 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 453 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 454
 455 /* VSC Crossbar switches */
 456 #define CONFIG_VSC_CROSSBAR
 457 #define VSC3316_FSM_TX_ADDR     0x70
 458 #define VSC3316_FSM_RX_ADDR     0x71
 459
 460 /*
 461  * RapidIO
 462  */
 463 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 464 #ifdef CONFIG_PHYS_64BIT
 465 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 466 #else
 467 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 468 #endif
 469 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 470
 471 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 472 #ifdef CONFIG_PHYS_64BIT
 473 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 474 #else
 475 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 476 #endif
 477 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 478
 479 /*
 480  * for slave u-boot IMAGE instored in master memory space,
 481  * PHYS must be aligned based on the SIZE
 482  */
 483 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 484 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 485 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 486 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 487 /*
 488  * for slave UCODE and ENV instored in master memory space,
 489  * PHYS must be aligned based on the SIZE
 490  */
 491 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 492 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 493 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 494
 495 /* slave core release by master*/
 496 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 497 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 498
 499 /*
 500  * SRIO_PCIE_BOOT - SLAVE
 501  */
 502 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 503 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 504 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 505                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 506 #endif
 507 /*
 508  * eSPI - Enhanced SPI
 509  */
 510 #define CONFIG_FSL_ESPI
 511 #define CONFIG_SPI_FLASH
 512 #define CONFIG_SPI_FLASH_SST
 513 #define CONFIG_CMD_SF
 514 #define CONFIG_SF_DEFAULT_SPEED         10000000
 515 #define CONFIG_SF_DEFAULT_MODE          0
 516
 517 /*
 518  * General PCI
 519  * Memory space is mapped 1-1, but I/O space must start from 0.
 520  */
 521
 522 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 523 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 524 #ifdef CONFIG_PHYS_64BIT
 525 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 526 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 527 #else
 528 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 529 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 530 #endif
 531 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 532 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 533 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 534 #ifdef CONFIG_PHYS_64BIT
 535 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 536 #else
 537 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 538 #endif
 539 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 540
 541 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 542 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 543 #ifdef CONFIG_PHYS_64BIT
 544 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 545 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 546 #else
 547 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 548 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 549 #endif
 550 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 551 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 552 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 553 #ifdef CONFIG_PHYS_64BIT
 554 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 555 #else
 556 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 557 #endif
 558 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 559
 560 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 561 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 562 #ifdef CONFIG_PHYS_64BIT
 563 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 564 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 565 #else
 566 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 567 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 568 #endif
 569 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 570 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 571 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 572 #ifdef CONFIG_PHYS_64BIT
 573 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 574 #else
 575 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 576 #endif
 577 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 578
 579 /* controller 4, Base address 203000 */
 580 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 581 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 582 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 583 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 584 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 585 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 586
 587 /* Qman/Bman */
 588 #ifndef CONFIG_NOBQFMAN
 589 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 590 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 591 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 592 #ifdef CONFIG_PHYS_64BIT
 593 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 594 #else
 595 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 596 #endif
 597 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 598 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 599 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 600 #ifdef CONFIG_PHYS_64BIT
 601 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 602 #else
 603 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 604 #endif
 605 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 606
 607 #define CONFIG_SYS_DPAA_FMAN
 608 #define CONFIG_SYS_DPAA_PME
 609 #define CONFIG_SYS_PMAN
 610 #define CONFIG_SYS_DPAA_DCE
 611 #define CONFIG_SYS_INTERLAKEN
 612
 613 /* Default address of microcode for the Linux Fman driver */
 614 #if defined(CONFIG_SPIFLASH)
 615 /*
 616  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 617  * env, so we got 0x110000.
 618  */
 619 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 620 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 621 #elif defined(CONFIG_SDCARD)
 622 /*
 623  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 624  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 625  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 626  */
 627 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 628 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 629 #elif defined(CONFIG_NAND)
 630 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 631 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 632 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 633 /*
 634  * Slave has no ucode locally, it can fetch this from remote. When implementing
 635  * in two corenet boards, slave's ucode could be stored in master's memory
 636  * space, the address can be mapped from slave TLB->slave LAW->
 637  * slave SRIO or PCIE outbound window->master inbound window->
 638  * master LAW->the ucode address in master's memory space.
 639  */
 640 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 641 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xFFE00000
 642 #else
 643 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 644 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF40000
 645 #endif
 646 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 647 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 648 #endif /* CONFIG_NOBQFMAN */
 649
 650 #ifdef CONFIG_SYS_DPAA_FMAN
 651 #define CONFIG_FMAN_ENET
 652 #define CONFIG_PHYLIB_10G
 653 #define CONFIG_PHY_VITESSE
 654 #define CONFIG_PHY_TERANETICS
 655 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 656 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 657 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 658 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 659 #define FM1_10GEC1_PHY_ADDR     0x0
 660 #define FM1_10GEC2_PHY_ADDR     0x1
 661 #define FM2_10GEC1_PHY_ADDR     0x2
 662 #define FM2_10GEC2_PHY_ADDR     0x3
 663 #endif
 664
 665 #ifdef CONFIG_PCI
 666 #define CONFIG_PCI_INDIRECT_BRIDGE
 667 #define CONFIG_NET_MULTI
 668 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 669 #define CONFIG_E1000
 670
 671 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 672 #define CONFIG_DOS_PARTITION
 673 #endif  /* CONFIG_PCI */
 674
 675 /* SATA */
 676 #ifdef CONFIG_FSL_SATA_V2
 677 #define CONFIG_LIBATA
 678 #define CONFIG_FSL_SATA
 679
 680 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 681 #define CONFIG_SATA1
 682 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 683 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 684 #define CONFIG_SATA2
 685 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 686 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 687
 688 #define CONFIG_LBA48
 689 #define CONFIG_CMD_SATA
 690 #define CONFIG_DOS_PARTITION
 691 #define CONFIG_CMD_EXT2
 692 #endif
 693
 694 #ifdef CONFIG_FMAN_ENET
 695 #define CONFIG_MII              /* MII PHY management */
 696 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 697 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 698 #endif
 699
 700 /*
 701  * Environment
 702  */
 703 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 704 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 705
 706 /*
 707  * Command line configuration.
 708  */
 709 #include <config_cmd_default.h>
 710
 711 #define CONFIG_CMD_DHCP
 712 #define CONFIG_CMD_ELF
 713 #define CONFIG_CMD_ERRATA
 714 #define CONFIG_CMD_GREPENV
 715 #define CONFIG_CMD_IRQ
 716 #define CONFIG_CMD_I2C
 717 #define CONFIG_CMD_MII
 718 #define CONFIG_CMD_PING
 719 #define CONFIG_CMD_SETEXPR
 720
 721 #ifdef CONFIG_PCI
 722 #define CONFIG_CMD_PCI
 723 #define CONFIG_CMD_NET
 724 #endif
 725
 726 /*
 727 * USB
 728 */
 729 #define CONFIG_CMD_USB
 730 #define CONFIG_USB_STORAGE
 731 #define CONFIG_USB_EHCI
 732 #define CONFIG_USB_EHCI_FSL
 733 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 734 #define CONFIG_CMD_EXT2
 735 #define CONFIG_HAS_FSL_DR_USB
 736
 737 #define CONFIG_MMC
 738
 739 #ifdef CONFIG_MMC
 740 #define CONFIG_FSL_ESDHC
 741 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 742 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 743 #define CONFIG_CMD_MMC
 744 #define CONFIG_GENERIC_MMC
 745 #define CONFIG_CMD_EXT2
 746 #define CONFIG_CMD_FAT
 747 #define CONFIG_DOS_PARTITION
 748 #endif
 749
 750 /*
 751  * Miscellaneous configurable options
 752  */
 753 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 754 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 755 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 756 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 757 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 758 #ifdef CONFIG_CMD_KGDB
 759 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 760 #else
 761 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 762 #endif
 763 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 764 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 765 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 766 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks*/
 767
 768 /*
 769  * For booting Linux, the board info and command line data
 770  * have to be in the first 64 MB of memory, since this is
 771  * the maximum mapped by the Linux kernel during initialization.
 772  */
 773 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 774 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 775
 776 #ifdef CONFIG_CMD_KGDB
 777 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 778 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 779 #endif
 780
 781 /*
 782  * Environment Configuration
 783  */
 784 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 785 #define CONFIG_BOOTFILE         "uImage"
 786 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 787
 788 /* default location for tftp and bootm */
 789 #define CONFIG_LOADADDR         1000000
 790
 791 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 792
 793 #define CONFIG_BAUDRATE 115200
 794
 795 #define __USB_PHY_TYPE  utmi
 796
 797 /*
 798  * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be
 799  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to
 800  * cacheline interleaving. It can be cacheline, page, bank, superbank.
 801  * See doc/README.fsl-ddr for details.
 802  */
 803 #ifdef CONFIG_PPC_T4240
 804 #define CTRL_INTLV_PREFERED 3way_4KB
 805 #else
 806 #define CTRL_INTLV_PREFERED cacheline
 807 #endif
 808
 809 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 810         "hwconfig=fsl_ddr:"                                     \
 811         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 812         "bank_intlv=auto;"                                      \
 813         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 814         "netdev=eth0\0"                                         \
 815         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 816         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 817         "tftpflash=tftpboot $loadaddr $uboot && "               \
 818         "protect off $ubootaddr +$filesize && "                 \
 819         "erase $ubootaddr +$filesize && "                       \
 820         "cp.b $loadaddr $ubootaddr $filesize && "               \
 821         "protect on $ubootaddr +$filesize && "                  \
 822         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 823         "consoledev=ttyS0\0"                                    \
 824         "ramdiskaddr=2000000\0"                                 \
 825         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
 826         "fdtaddr=c00000\0"                                      \
 827         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
 828         "bdev=sda3\0"                                           \
 829         "c=ffe\0"
 830
 831 /* For emulation this causes u-boot to jump to the start of the proof point
 832    app code automatically */
 833 #define CONFIG_PROOF_POINTS                     \
 834  "setenv bootargs root=/dev/$bdev rw "          \
 835  "console=$consoledev,$baudrate $othbootargs;"  \
 836  "cpu 1 release 0x29000000 - - -;"              \
 837  "cpu 2 release 0x29000000 - - -;"              \
 838  "cpu 3 release 0x29000000 - - -;"              \
 839  "cpu 4 release 0x29000000 - - -;"              \
 840  "cpu 5 release 0x29000000 - - -;"              \
 841  "cpu 6 release 0x29000000 - - -;"              \
 842  "cpu 7 release 0x29000000 - - -;"              \
 843  "go 0x29000000"
 844
 845 #define CONFIG_HVBOOT                           \
 846  "setenv bootargs config-addr=0x60000000; "     \
 847  "bootm 0x01000000 - 0x00f00000"
 848
 849 #define CONFIG_ALU                              \
 850  "setenv bootargs root=/dev/$bdev rw "          \
 851  "console=$consoledev,$baudrate $othbootargs;"  \
 852  "cpu 1 release 0x01000000 - - -;"              \
 853  "cpu 2 release 0x01000000 - - -;"              \
 854  "cpu 3 release 0x01000000 - - -;"              \
 855  "cpu 4 release 0x01000000 - - -;"              \
 856  "cpu 5 release 0x01000000 - - -;"              \
 857  "cpu 6 release 0x01000000 - - -;"              \
 858  "cpu 7 release 0x01000000 - - -;"              \
 859  "go 0x01000000"
 860
 861 #define CONFIG_LINUX                            \
 862  "setenv bootargs root=/dev/ram rw "            \
 863  "console=$consoledev,$baudrate $othbootargs;"  \
 864  "setenv ramdiskaddr 0x02000000;"               \
 865  "setenv fdtaddr 0x00c00000;"                   \
 866  "setenv loadaddr 0x1000000;"                   \
 867  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 868
 869 #define CONFIG_HDBOOT                                   \
 870         "setenv bootargs root=/dev/$bdev rw "           \
 871         "console=$consoledev,$baudrate $othbootargs;"   \
 872         "tftp $loadaddr $bootfile;"                     \
 873         "tftp $fdtaddr $fdtfile;"                       \
 874         "bootm $loadaddr - $fdtaddr"
 875
 876 #define CONFIG_NFSBOOTCOMMAND                   \
 877         "setenv bootargs root=/dev/nfs rw "     \
 878         "nfsroot=$serverip:$rootpath "          \
 879         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 880         "console=$consoledev,$baudrate $othbootargs;"   \
 881         "tftp $loadaddr $bootfile;"             \
 882         "tftp $fdtaddr $fdtfile;"               \
 883         "bootm $loadaddr - $fdtaddr"
 884
 885 #define CONFIG_RAMBOOTCOMMAND                           \
 886         "setenv bootargs root=/dev/ram rw "             \
 887         "console=$consoledev,$baudrate $othbootargs;"   \
 888         "tftp $ramdiskaddr $ramdiskfile;"               \
 889         "tftp $loadaddr $bootfile;"                     \
 890         "tftp $fdtaddr $fdtfile;"                       \
 891         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 892
 893 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 894
 895 #ifdef CONFIG_SECURE_BOOT
 896 #include <asm/fsl_secure_boot.h>
 897 #endif
 898
 899 #endif  /* __CONFIG_H */