include/configs/trats2.h

   1 /*
   2  * Copyright (C) 2013 Samsung Electronics
   3  * Sanghee Kim <sh0130.kim@samsung.com>
   4  * Piotr Wilczek <p.wilczek@samsung.com>
   5  *
   6  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_TRATS2_H
  12 #define __CONFIG_TRATS2_H
  13
  14 #include <configs/exynos4-dt.h>
  15
  16 #define CONFIG_SYS_PROMPT       "Trats2 # "     /* Monitor Command Prompt */
  17
  18 #undef CONFIG_DEFAULT_DEVICE_TREE
  19 #define CONFIG_DEFAULT_DEVICE_TREE      exynos4412-trats2
  20
  21 #define CONFIG_TIZEN                    /* TIZEN lib */
  22
  23 #define CONFIG_SYS_L2CACHE_OFF
  24 #ifndef CONFIG_SYS_L2CACHE_OFF
  25 #define CONFIG_SYS_L2_PL310
  26 #define CONFIG_SYS_PL310_BASE   0x10502000
  27 #endif
  28
  29 /* TRATS2 has 4 banks of DRAM */
  30 #define CONFIG_NR_DRAM_BANKS            4
  31 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  32 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  33 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  34 /* memtest works on */
  35 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  36 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
  37 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
  38
  39 #define CONFIG_SYS_TEXT_BASE            0x43e00000
  40
  41 #include <linux/sizes.h>
  42 /* Size of malloc() pool */
  43 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (80 * SZ_1M))
  44
  45 /* select serial console configuration */
  46 #define CONFIG_SERIAL2
  47 #define CONFIG_BAUDRATE                 115200
  48
  49 /* Console configuration */
  50 #define CONFIG_SYS_CONSOLE_INFO_QUIET
  51 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  52
  53 #define CONFIG_BOOTARGS                 "Please use defined boot"
  54 #define CONFIG_BOOTCOMMAND              "run mmcboot"
  55 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC1,115200n8\0"
  56
  57 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  58                                         - GENERATED_GBL_DATA_SIZE)
  59
  60 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  61
  62 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  63
  64 #define CONFIG_ENV_IS_IN_MMC
  65 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  66 #define CONFIG_ENV_SIZE                 4096
  67 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
  68
  69 #define CONFIG_ENV_OVERWRITE
  70
  71 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  72 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  73
  74 /* Tizen - partitions definitions */
  75 #define PARTS_CSA               "csa-mmc"
  76 #define PARTS_BOOT              "boot"
  77 #define PARTS_QBOOT             "qboot"
  78 #define PARTS_CSC               "csc"
  79 #define PARTS_ROOT              "platform"
  80 #define PARTS_DATA              "data"
  81 #define PARTS_UMS               "ums"
  82
  83 #define PARTS_DEFAULT \
  84         "uuid_disk=${uuid_gpt_disk};" \
  85         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
  86         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
  87         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
  88         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
  89         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
  90         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
  91         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
  92
  93 #define CONFIG_DFU_ALT \
  94         "u-boot mmc 80 800;" \
  95         "uImage ext4 0 2;" \
  96         "modem.bin ext4 0 2;" \
  97         "exynos4412-trats2.dtb ext4 0 2;" \
  98         ""PARTS_CSA" part 0 1;" \
  99         ""PARTS_BOOT" part 0 2;" \
 100         ""PARTS_QBOOT" part 0 3;" \
 101         ""PARTS_CSC" part 0 4;" \
 102         ""PARTS_ROOT" part 0 5;" \
 103         ""PARTS_DATA" part 0 6;" \
 104         ""PARTS_UMS" part 0 7;" \
 105         "params.bin mmc 0x38 0x8\0"
 106
 107 #define CONFIG_EXTRA_ENV_SETTINGS \
 108         "bootk=" \
 109                 "run loaduimage;" \
 110                 "if run loaddtb; then " \
 111                         "bootm 0x40007FC0 - ${fdtaddr};" \
 112                 "fi;" \
 113                 "bootm 0x40007FC0;\0" \
 114         "updatemmc=" \
 115                 "mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \
 116                 "mmc boot 0 1 1 0\0" \
 117         "updatebackup=" \
 118                 "mmc boot 0 1 1 2; mmc write 0x42100000 0 0x200;" \
 119                 " mmc boot 0 1 1 0\0" \
 120         "updatebootb=" \
 121                 "mmc read 0x51000000 0x80 0x200; run updatebackup\0" \
 122         "updateuboot=" \
 123                 "mmc write 0x50000000 0x80 0x400\0" \
 124         "mmcboot=" \
 125                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 126                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 127                 "run bootk\0" \
 128         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 129         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 130         "verify=n\0" \
 131         "rootfstype=ext4\0" \
 132         "console=" CONFIG_DEFAULT_CONSOLE \
 133         "kernelname=uImage\0" \
 134         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
 135                 "${kernelname}\0" \
 136         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 137                 "${fdtfile}\0" \
 138         "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
 139         "mmcbootpart=2\0" \
 140         "mmcrootpart=5\0" \
 141         "opts=always_resume=1\0" \
 142         "partitions=" PARTS_DEFAULT \
 143         "dfu_alt_info=" CONFIG_DFU_ALT \
 144         "uartpath=ap\0" \
 145         "usbpath=ap\0" \
 146         "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
 147         "consoleoff=set console console=ram; save; reset\0" \
 148         "spladdr=0x40000100\0" \
 149         "splsize=0x200\0" \
 150         "splfile=falcon.bin\0" \
 151         "spl_export=" \
 152                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 153                    "setenv spl_imgsize 0x${spl_imgsize};" \
 154                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 155                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 156                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 157                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 158                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 159                    "spl export atags 0x40007FC0;" \
 160                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 161                    "mw.l ${spl_addr_tmp} ${splsize};" \
 162                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 163                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 164                    "setenv spl_imgsize;" \
 165                    "setenv spl_imgaddr;" \
 166                    "setenv spl_addr_tmp;\0" \
 167         "fdtaddr=40800000\0" \
 168
 169 /* GPT */
 170 #define CONFIG_RANDOM_UUID
 171
 172 /* I2C */
 173 #include <asm/arch/gpio.h>
 174
 175 #define CONFIG_CMD_I2C
 176
 177 #define CONFIG_SYS_I2C
 178 #define CONFIG_SYS_I2C_S3C24X0
 179 #define CONFIG_SYS_I2C_S3C24X0_SPEED    100000
 180 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0
 181 #define CONFIG_MAX_I2C_NUM              8
 182 #define CONFIG_SYS_I2C_SOFT
 183 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 184 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 185 #define I2C_SOFT_DECLARATIONS2
 186 #define CONFIG_SYS_I2C_SOFT_SPEED_2     50000
 187 #define CONFIG_SYS_I2C_SOFT_SLAVE_2     0x00
 188 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 189 #define CONFIG_SYS_I2C_INIT_BOARD
 190
 191 #ifndef __ASSEMBLY__
 192 int get_soft_i2c_scl_pin(void);
 193 int get_soft_i2c_sda_pin(void);
 194 #endif
 195 #define CONFIG_SOFT_I2C_GPIO_SCL        get_soft_i2c_scl_pin()
 196 #define CONFIG_SOFT_I2C_GPIO_SDA        get_soft_i2c_sda_pin()
 197
 198 /* POWER */
 199 #define CONFIG_POWER
 200 #define CONFIG_POWER_I2C
 201 #define CONFIG_POWER_MAX77686
 202 #define CONFIG_POWER_PMIC_MAX77693
 203 #define CONFIG_POWER_MUIC_MAX77693
 204 #define CONFIG_POWER_FG_MAX77693
 205 #define CONFIG_POWER_BATTERY_TRATS2
 206
 207 /* Security subsystem - enable hw_rand() */
 208 #define CONFIG_EXYNOS_ACE_SHA
 209 #define CONFIG_LIB_HW_RAND
 210
 211 /* Common misc for Samsung */
 212 #define CONFIG_MISC_COMMON
 213
 214 #define CONFIG_MISC_INIT_R
 215
 216 /* Download menu - Samsung common */
 217 #define CONFIG_LCD_MENU
 218 #define CONFIG_LCD_MENU_BOARD
 219
 220 /* Download menu - definitions for check keys */
 221 #ifndef __ASSEMBLY__
 222 #include <power/max77686_pmic.h>
 223
 224 #define KEY_PWR_PMIC_NAME               "MAX77686_PMIC"
 225 #define KEY_PWR_STATUS_REG              MAX77686_REG_PMIC_STATUS1
 226 #define KEY_PWR_STATUS_MASK             (1 << 0)
 227 #define KEY_PWR_INTERRUPT_REG           MAX77686_REG_PMIC_INT1
 228 #define KEY_PWR_INTERRUPT_MASK          (1 << 1)
 229
 230 #define KEY_VOL_UP_GPIO                 exynos4x12_gpio_get(2, x2, 2)
 231 #define KEY_VOL_DOWN_GPIO               exynos4x12_gpio_get(2, x3, 3)
 232 #endif /* __ASSEMBLY__ */
 233
 234 /* LCD console */
 235 #define LCD_BPP                 LCD_COLOR16
 236 #define CONFIG_SYS_WHITE_ON_BLACK
 237
 238 /* LCD */
 239 #define CONFIG_EXYNOS_FB
 240 #define CONFIG_LCD
 241 #define CONFIG_CMD_BMP
 242 #define CONFIG_BMP_16BPP
 243 #define CONFIG_FB_ADDR          0x52504000
 244 #define CONFIG_S6E8AX0
 245 #define CONFIG_EXYNOS_MIPI_DSIM
 246 #define CONFIG_VIDEO_BMP_GZIP
 247 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 248
 249 #define LCD_XRES        720
 250 #define LCD_YRES        1280
 251
 252 #endif  /* __CONFIG_H */