]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/tx53.h
tx53: use fatload from first mmc partition and second partition for rootfs
[karo-tx-uboot.git] / include / configs / tx53.h
1 /*
2  * Copyright (C) 2012 <LW@KARO-electronics.de>
3  *
4  * SPDX-License-Identifier:      GPL-2.0
5  *
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #define CONFIG_MX53                     /* must be set before including imx-regs.h */
12
13 #include <asm/sizes.h>
14 #include <asm/arch/imx-regs.h>
15
16 /*
17  * Ka-Ro TX53 board - SoC configuration
18  */
19 #define CONFIG_TX53                     /* TX53 SoM */
20 #define CONFIG_SYS_MX5_IOMUX_V3
21 #define CONFIG_MXC_GPIO                 /* GPIO control */
22 #define CONFIG_SYS_MX5_HCLK             24000000
23 #define CONFIG_SYS_DDR_CLKSEL           0
24 #define CONFIG_SYS_HZ                   1000    /* Ticks per second */
25 #define CONFIG_SHOW_ACTIVITY
26 #define CONFIG_DISPLAY_BOARDINFO
27 #define CONFIG_BOARD_LATE_INIT
28 #define CONFIG_BOARD_EARLY_INIT_F
29
30 /* LCD Logo and Splash screen support */
31 #define CONFIG_LCD
32 #ifdef CONFIG_LCD
33 #define CONFIG_SPLASH_SCREEN
34 #define CONFIG_SPLASH_SCREEN_ALIGN
35 #define CONFIG_VIDEO_IPUV3
36 #define CONFIG_IPUV3_CLK                200000000
37 #define CONFIG_LCD_LOGO
38 #define LCD_BPP                         LCD_COLOR24
39 #define CONFIG_CMD_BMP
40 #define CONFIG_VIDEO_BMP_RLE8
41 #endif /* CONFIG_LCD */
42
43 #ifdef CONFIG_SYS_LVDS_IF
44 #define is_lvds()                       1
45 #else
46 #define is_lvds()                       0
47 #endif
48
49 /*
50  * Memory configurations
51  */
52 #define PHYS_SDRAM_1                    0x70000000      /* Base address of bank 1 */
53 #define PHYS_SDRAM_1_SIZE               SZ_512M
54 #if CONFIG_NR_DRAM_BANKS > 1
55 #define PHYS_SDRAM_2                    0xb0000000      /* Base address of bank 2 */
56 #define PHYS_SDRAM_2_SIZE               SZ_512M
57 #define TX53_MOD_SUFFIX                 "1"
58 #else
59 #define TX53_MOD_SUFFIX                 "0"
60 #endif
61 #define CONFIG_STACKSIZE                SZ_128K
62 #define CONFIG_SYS_MALLOC_LEN           SZ_8M
63 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1    /* Memtest start address */
64 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1 + SZ_4M)  /* 4 MB RAM test */
65 #define CONFIG_SYS_SDRAM_CLK            400
66
67 /*
68  * U-Boot general configurations
69  */
70 #define CONFIG_SYS_LONGHELP
71 #define CONFIG_SYS_PROMPT               "TX53 U-Boot > "
72 #define CONFIG_SYS_CBSIZE               2048    /* Console I/O buffer size */
73 #define CONFIG_SYS_PBSIZE \
74         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
75                                                 /* Print buffer size */
76 #define CONFIG_SYS_MAXARGS              64      /* Max number of command args */
77 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
78                                                 /* Boot argument buffer size */
79 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
80 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
81 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
82
83 #define CONFIG_SYS_64BIT_VSPRINTF
84 #define CONFIG_SYS_NO_FLASH
85
86 /*
87  * Flattened Device Tree (FDT) support
88 */
89 #define CONFIG_OF_LIBFDT
90 #define CONFIG_OF_BOARD_SETUP
91 #define CONFIG_DEFAULT_DEVICE_TREE      tx53
92 #define CONFIG_ARCH_DEVICE_TREE         mx53
93 #define CONFIG_SYS_FDT_ADDR             (PHYS_SDRAM_1 + SZ_16M)
94
95 /*
96  * Boot Linux
97  */
98 #define xstr(s)                         str(s)
99 #define str(s)                          #s
100 #define __pfx(x, s)                     (x##s)
101 #define _pfx(x, s)                      __pfx(x, s)
102
103 #define CONFIG_CMDLINE_TAG
104 #define CONFIG_SETUP_MEMORY_TAGS
105 #define CONFIG_BOOTDELAY                3
106 #define CONFIG_ZERO_BOOTDELAY_CHECK
107 #define CONFIG_SYS_AUTOLOAD             "no"
108 #define CONFIG_BOOTFILE                 "uImage"
109 #define CONFIG_BOOTARGS                 "init=/linuxrc console=ttymxc0,115200 ro debug panic=1"
110 #define CONFIG_BOOTCOMMAND              "run bootcmd_${boot_mode} bootm_cmd"
111 #define CONFIG_LOADADDR                 78000000
112 #define CONFIG_SYS_LOAD_ADDR            _pfx(0x, CONFIG_LOADADDR)
113 #define CONFIG_U_BOOT_IMG_SIZE          SZ_1M
114 #define CONFIG_HW_WATCHDOG
115
116 /*
117  * Extra Environments
118  */
119 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
120         "autostart=no\0"                                                \
121         "baseboard=stk5-v3\0"                                           \
122         "bootargs_jffs2=run default_bootargs;set bootargs ${bootargs}"  \
123         " root=/dev/mtdblock3 rootfstype=jffs2\0"                       \
124         "bootargs_mmc=run default_bootargs;set bootargs ${bootargs}"    \
125         " root=/dev/mmcblk0p2 rootwait\0"                               \
126         "bootargs_nfs=run default_bootargs;set bootargs ${bootargs}"    \
127         " root=/dev/nfs nfsroot=${nfs_server}:${nfsroot},nolock"        \
128         " ip=dhcp\0"                                                    \
129         "bootargs_ubifs=run default_bootargs;set bootargs ${bootargs}"  \
130         " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs\0"           \
131         "bootcmd_jffs2=set autostart no;run bootargs_jffs2"             \
132         ";nboot linux\0"                                                \
133         "bootcmd_mmc=set autostart no;run bootargs_mmc"                 \
134         ";fatload mmc 0 ${loadaddr} uImage\0"                           \
135         "bootcmd_nand=set autostart no;run bootargs_ubifs"              \
136         ";nboot linux\0"                                                \
137         "bootcmd_net=set autoload y;set autostart n;run bootargs_nfs"   \
138         ";dhcp\0"                                                       \
139         "bootm_cmd=bootm ${loadaddr} - ${fdtaddr}\0"                    \
140         "boot_mode=nand\0"                                              \
141         "cpu_clk=800\0"                                                 \
142         "default_bootargs=set bootargs " CONFIG_BOOTARGS                \
143         " ${append_bootargs}\0"                                         \
144         "fdtaddr=71000000\0"                                            \
145         "fdtsave=nand erase.part dtb"                                   \
146         ";nand write ${fdtaddr} dtb ${fdtsize}\0"                       \
147         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
148         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
149         "nfsroot=/tftpboot/rootfs\0"                                    \
150         "otg_mode=device\0"                                             \
151         "touchpanel=tsc2007\0"                                          \
152         "video_mode=VGA\0"
153
154 #define MTD_NAME                        "mxc_nand"
155 #define MTDIDS_DEFAULT                  "nand0=" MTD_NAME
156 #define CONFIG_FDT_FIXUP_PARTITIONS
157
158 /*
159  * U-Boot Commands
160  */
161 #include <config_cmd_default.h>
162 #define CONFIG_CMD_CACHE
163 #define CONFIG_CMD_MMC
164 #define CONFIG_CMD_NAND
165 #define CONFIG_CMD_MTDPARTS
166 #define CONFIG_CMD_BOOTCE
167 #define CONFIG_CMD_TIME
168 #define CONFIG_CMD_I2C
169 #define CONFIG_CMD_MEMTEST
170
171 /*
172  * Serial Driver
173  */
174 #define CONFIG_MXC_UART
175 #define CONFIG_MXC_UART_BASE            UART1_BASE
176 #define CONFIG_MXC_GPIO
177 #define CONFIG_BAUDRATE                 115200          /* Default baud rate */
178 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, }
179 #define CONFIG_SYS_CONSOLE_INFO_QUIET
180
181 /*
182  * Ethernet Driver
183  */
184 #define CONFIG_FEC_MXC
185 #ifdef CONFIG_FEC_MXC
186 #define IMX_FEC_BASE                    FEC_BASE_ADDR
187 #define CONFIG_FEC_MXC_PHYADDR          0
188 #define CONFIG_PHYLIB
189 #define CONFIG_PHY_SMSC
190 #define CONFIG_MII
191 #define CONFIG_FEC_XCV_TYPE             MII100
192 #define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
193 #define CONFIG_CMD_MII
194 #define CONFIG_CMD_DHCP
195 #define CONFIG_CMD_PING
196 /* Add for working with "strict" DHCP server */
197 #define CONFIG_BOOTP_SUBNETMASK
198 #define CONFIG_BOOTP_GATEWAY
199 #define CONFIG_BOOTP_DNS
200 #endif
201
202 /*
203  * I2C Configs
204  */
205 #ifdef CONFIG_CMD_I2C
206 #define CONFIG_HARD_I2C
207 #define CONFIG_I2C_MXC
208 #define CONFIG_SYS_I2C_BASE             I2C1_BASE_ADDR
209 #define CONFIG_SYS_I2C_MX6_PORT1
210 #define CONFIG_SYS_I2C_SPEED            400000
211 #define CONFIG_SYS_I2C_SLAVE            0x34
212 #endif
213
214 /*
215  * NAND flash driver
216  */
217 #ifdef CONFIG_CMD_NAND
218 #define CONFIG_MTD_DEVICE
219 #define CONFIG_ENV_IS_IN_NAND
220 #define CONFIG_NAND_MXC
221 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
222 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
223 #define CONFIG_MXC_NAND_HWECC
224 #define CONFIG_CMD_NAND_TRIMFFS
225 #define CONFIG_SYS_MAX_FLASH_SECT       1024
226 #define CONFIG_SYS_MAX_FLASH_BANKS      1
227 #define CONFIG_SYS_NAND_MAX_CHIPS       1
228 #define CONFIG_SYS_MAX_NAND_DEVICE      1
229 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
230 #define CONFIG_SYS_NAND_USE_FLASH_BBT
231 #ifdef CONFIG_ENV_IS_IN_NAND
232 #define CONFIG_ENV_OVERWRITE
233 #define CONFIG_ENV_OFFSET               CONFIG_U_BOOT_IMG_SIZE
234 #define CONFIG_ENV_SIZE                 0x20000 /* 128 KiB */
235 #define CONFIG_ENV_RANGE                0x60000
236 #endif
237 #ifndef CONFIG_SYS_NO_FLASH
238 #define CONFIG_CMD_FLASH
239 #define CONFIG_SYS_NAND_BASE            0xa0000000
240 #define CONFIG_FIT
241 #else
242 #define CONFIG_SYS_NAND_BASE            0x00000000
243 #define CONFIG_CMD_ROMUPDATE
244 #endif
245 #endif /* CONFIG_CMD_NAND */
246
247 /*
248  * MMC Driver
249  */
250 #ifdef CONFIG_CMD_MMC
251 #ifndef CONFIG_ENV_IS_IN_NAND
252 #define CONFIG_ENV_IS_IN_MMC
253 #endif
254 #define CONFIG_MMC
255 #define CONFIG_GENERIC_MMC
256 #define CONFIG_FSL_ESDHC
257 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
258 #define CONFIG_SYS_FSL_ESDHC_NUM        2
259
260 #define CONFIG_DOS_PARTITION
261 #define CONFIG_CMD_FAT
262 #define CONFIG_CMD_EXT2
263
264 /*
265  * Environments on MMC
266  */
267 #ifdef CONFIG_ENV_IS_IN_MMC
268 #define CONFIG_SYS_MMC_ENV_DEV          0
269 #define CONFIG_ENV_OVERWRITE
270 /* Associated with the MMC layout defined in mmcops.c */
271 #define CONFIG_ENV_OFFSET               SZ_1K
272 #define CONFIG_ENV_SIZE                 (SZ_128K - CONFIG_ENV_OFFSET)
273 #define CONFIG_DYNAMIC_MMC_DEVNO
274 #endif /* CONFIG_ENV_IS_IN_MMC */
275 #endif /* CONFIG_CMD_MMC */
276
277 #ifdef CONFIG_ENV_OFFSET_REDUND
278 #define MTDPARTS_DEFAULT                "mtdparts=" MTD_NAME ":"        \
279         "1m(u-boot),"                                                   \
280         xstr(CONFIG_ENV_RANGE)                                          \
281         "(env),"                                                        \
282         xstr(CONFIG_ENV_RANGE)                                          \
283         "(env2),4m(linux),16m(rootfs),108032k(userfs),256k(dtb),512k@0x7f80000(bbt)ro"
284 #else
285 #define MTDPARTS_DEFAULT                "mtdparts=" MTD_NAME ":"        \
286         "1m(u-boot),"                                                   \
287         xstr(CONFIG_ENV_RANGE)                                          \
288         "(env),4m(linux),16m(rootfs),108416k(userfs),256k(dtb),512k@0x7f80000(bbt)ro"
289 #endif
290
291 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
292 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
293                                         GENERATED_GBL_DATA_SIZE)
294
295 #ifdef CONFIG_CMD_IIM
296 #define CONFIG_FSL_IIM
297 #endif
298
299 #endif /* __CONFIG_H */