include/configs/wireless_space.h

   1 /*
   2  * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
   3  *
   4  * Based on the netspace_v2 code which is
   5  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef _CONFIG_WIRELESS_SPACE_H
  11 #define _CONFIG_WIRELESS_SPACE_H
  12
  13 /*
  14  * Machine number definition
  15  */
  16 #define MACH_TYPE_WIRELESS_SPACE        2500 /* is missing in mach-types.h */
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_WIRELESS_SPACE
  18 #define CONFIG_IDENT_STRING             " Wireless Space"
  19
  20 /*
  21  * High Level Configuration Options (easy to change)
  22  */
  23 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  24 /* SoC name */
  25 #define CONFIG_KW88F6281
  26 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  27
  28 /*
  29  * Commands configuration
  30  */
  31 #define CONFIG_SYS_NO_FLASH             /* no NOR or SPI flash */
  32 #include <config_cmd_default.h>
  33 #define CONFIG_CMD_ENV
  34 #define CONFIG_CMD_DHCP
  35 #define CONFIG_CMD_PING
  36 #define CONFIG_CMD_NAND
  37 #define CONFIG_CMD_I2C
  38 #define CONFIG_CMD_IDE
  39 #define CONFIG_CMD_USB
  40
  41 /*
  42  * Core clock definition
  43  */
  44 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
  45
  46 /*
  47  * SDRAM configuration
  48  */
  49 #define CONFIG_NR_DRAM_BANKS            1
  50
  51 /*
  52  * Different SDRAM configuration and size for some of the boards derived
  53  * from the Network Space v2
  54  */
  55
  56 /*
  57  * mv-common.h should be defined after CMD configs since it used them
  58  * to enable certain macros
  59  */
  60 #include "mv-common.h"
  61
  62 /* Remove or override few declarations from mv-common.h */
  63 #undef CONFIG_RBTREE
  64 #undef CONFIG_SYS_IDE_MAXBUS
  65 #undef CONFIG_SYS_IDE_MAXDEVICE
  66 #define CONFIG_SYS_IDE_MAXBUS           1
  67 #define CONFIG_SYS_IDE_MAXDEVICE        1
  68 #undef CONFIG_SYS_PROMPT
  69 #define CONFIG_SYS_PROMPT               "ws> "
  70
  71 /*
  72  * Ethernet Driver configuration
  73  */
  74 #ifdef CONFIG_CMD_NET
  75 #define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
  76 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable only egiga0... */
  77 #define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
  78 #define CONFIG_PHY_BASE_ADR 0xa         /* ... through a 'fake' PHY */
  79 #define CONFIG_MII
  80 #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  81 #define CONFIG_NETCONSOLE
  82 #define CONFIG_MV88E61XX_SWITCH
  83 #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
  84 #define CONFIG_MV88E61XX_CMD
  85 #define CONFIG_CMD_TFTPPUT
  86 #endif /* CONFIG_CMD_NET */
  87
  88 /*
  89  * SATA Driver configuration
  90  */
  91 #ifdef CONFIG_MVSATA_IDE
  92 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  93 #endif /* CONFIG_MVSATA_IDE */
  94
  95 /*
  96  * Enable GPI0 support
  97  */
  98 #define CONFIG_KIRKWOOD_GPIO
  99
 100 /*
 101  * Enable I2C support
 102  */
 103 #ifdef CONFIG_CMD_I2C
 104 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
 105 #define CONFIG_CMD_EEPROM
 106 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 107 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
 108 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
 109 #endif /* CONFIG_CMD_I2C */
 110
 111 /*
 112  * Partition support
 113  */
 114 #define CONFIG_DOS_PARTITION
 115 #define CONFIG_EFI_PARTITION
 116
 117 /*
 118  * File systems support
 119  */
 120 #define CONFIG_CMD_EXT2
 121 #define CONFIG_CMD_FAT
 122
 123 /*
 124  * Use the HUSH parser
 125  */
 126 #define CONFIG_SYS_HUSH_PARSER
 127
 128 /*
 129  * Console configuration
 130  */
 131 #define CONFIG_CONSOLE_MUX
 132 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 133
 134 /*
 135  * Enable device tree support
 136  */
 137 #define CONFIG_OF_LIBFDT
 138
 139 /*
 140  * Environment variables configurations
 141  */
 142
 143 #define CONFIG_ENV_IS_IN_NAND
 144 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
 145 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
 146 #define CONFIG_ENV_OFFSET               0x80000 /* env starts here */
 147
 148 /*
 149  * Board-specific command to make using buttons etc easier
 150  */
 151
 152 #define CONFIG_WIRELESS_SPACE_CMD
 153
 154 /*
 155  * Default environment variables
 156  */
 157 #define CONFIG_PREBOOT
 158
 159 #define CONFIG_BOOTARGS "console=ttyS0,115200"
 160
 161 #define CONFIG_BOOTCOMMAND                                      \
 162         "if run usbload || run diskload; then bootm; fi"
 163
 164 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 165         "stdin=serial\0"                                        \
 166         "stdout=serial\0"                                       \
 167         "stderr=serial\0"                                       \
 168         "bootfile=uImage\0"                                     \
 169         "loadaddr=0x800000\0"                                   \
 170         "autoload=no\0"                                         \
 171         "netconsole="                                           \
 172                 "set stdin $stdin,nc; "                         \
 173                 "set stdout $stdout,nc; "                       \
 174                 "set stderr $stderr,nc;\0"                      \
 175         "diskload=ide reset && "                                \
 176                 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
 177         "usbload=usb start && "                                 \
 178                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"   \
 179         "preboot="                                              \
 180                 "dhcp && run netconsole\0"
 181
 182 #endif /* _CONFIG_WIRELESS_SPACE_H */