]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/dp83848.h
at91sam9260ek: move board id setup to config header
[karo-tx-uboot.git] / include / dp83848.h
1 /*
2  * DP83848 ethernet Physical layer
3  *
4  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
5  *
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License
9  * as published by the Free Software Foundation; either version
10  * 2 of the License, or (at your option) any later version.
11  */
12
13
14 /* National Semiconductor PHYSICAL LAYER TRANSCEIVER DP83848 */
15
16 #define DP83848_CTL_REG         0x0     /* Basic Mode Control Reg */
17 #define DP83848_STAT_REG                0x1     /* Basic Mode Status Reg */
18 #define DP83848_PHYID1_REG              0x2     /* PHY Idendifier Reg 1 */
19 #define DP83848_PHYID2_REG              0x3     /* PHY Idendifier Reg 2 */
20 #define DP83848_ANA_REG                 0x4     /* Auto_Neg Advt Reg  */
21 #define DP83848_ANLPA_REG               0x5     /* Auto_neg Link Partner Ability Reg */
22 #define DP83848_ANE_REG                 0x6     /* Auto-neg Expansion Reg  */
23 #define DP83848_PHY_STAT_REG            0x10    /* PHY Status Register  */
24 #define DP83848_PHY_INTR_CTRL_REG       0x11    /* PHY Interrupt Control Register */
25 #define DP83848_PHY_CTRL_REG            0x19    /* PHY Status Register  */
26
27 /*--Bit definitions: DP83848_CTL_REG */
28 #define DP83848_RESET           (1 << 15)  /* 1= S/W Reset */
29 #define DP83848_LOOPBACK        (1 << 14)  /* 1=loopback Enabled */
30 #define DP83848_SPEED_SELECT    (1 << 13)
31 #define DP83848_AUTONEG         (1 << 12)
32 #define DP83848_POWER_DOWN      (1 << 11)
33 #define DP83848_ISOLATE         (1 << 10)
34 #define DP83848_RESTART_AUTONEG (1 << 9)
35 #define DP83848_DUPLEX_MODE     (1 << 8)
36 #define DP83848_COLLISION_TEST  (1 << 7)
37
38 /*--Bit definitions: DP83848_STAT_REG */
39 #define DP83848_100BASE_T4      (1 << 15)
40 #define DP83848_100BASE_TX_FD   (1 << 14)
41 #define DP83848_100BASE_TX_HD   (1 << 13)
42 #define DP83848_10BASE_T_FD     (1 << 12)
43 #define DP83848_10BASE_T_HD     (1 << 11)
44 #define DP83848_MF_PREAMB_SUPPR (1 << 6)
45 #define DP83848_AUTONEG_COMP    (1 << 5)
46 #define DP83848_RMT_FAULT       (1 << 4)
47 #define DP83848_AUTONEG_ABILITY (1 << 3)
48 #define DP83848_LINK_STATUS     (1 << 2)
49 #define DP83848_JABBER_DETECT   (1 << 1)
50 #define DP83848_EXTEND_CAPAB    (1 << 0)
51
52 /*--definitions: DP83848_PHYID1 */
53 #define DP83848_PHYID1_OUI      0x2000
54 #define DP83848_PHYID2_OUI      0x5c90
55
56 /*--Bit definitions: DP83848_ANAR, DP83848_ANLPAR */
57 #define DP83848_NP              (1 << 15)
58 #define DP83848_ACK             (1 << 14)
59 #define DP83848_RF              (1 << 13)
60 #define DP83848_PAUSE           (1 << 10)
61 #define DP83848_T4              (1 << 9)
62 #define DP83848_TX_FDX          (1 << 8)
63 #define DP83848_TX_HDX          (1 << 7)
64 #define DP83848_10_FDX          (1 << 6)
65 #define DP83848_10_HDX          (1 << 5)
66 #define DP83848_AN_IEEE_802_3   0x0001
67
68 /*--Bit definitions: DP83848_ANER */
69 #define DP83848_PDF             (1 << 4)
70 #define DP83848_LP_NP_ABLE      (1 << 3)
71 #define DP83848_NP_ABLE         (1 << 2)
72 #define DP83848_PAGE_RX         (1 << 1)
73 #define DP83848_LP_AN_ABLE      (1 << 0)
74
75 /*--Bit definitions: DP83848_PHY_STAT */
76 #define DP83848_RX_ERR_LATCH            (1 << 13)
77 #define DP83848_POLARITY_STAT           (1 << 12)
78 #define DP83848_FALSE_CAR_SENSE         (1 << 11)
79 #define DP83848_SIG_DETECT              (1 << 10)
80 #define DP83848_DESCRAM_LOCK            (1 << 9)
81 #define DP83848_PAGE_RCV                (1 << 8)
82 #define DP83848_PHY_RMT_FAULT           (1 << 6)
83 #define DP83848_JABBER                  (1 << 5)
84 #define DP83848_AUTONEG_COMPLETE        (1 << 4)
85 #define DP83848_LOOPBACK_STAT           (1 << 3)
86 #define DP83848_DUPLEX                  (1 << 2)
87 #define DP83848_SPEED                   (1 << 1)
88 #define DP83848_LINK                    (1 << 0)