]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/mmc.h
8f51c939d66b53d2777a908a36b126e83e16d502
[karo-tx-uboot.git] / include / mmc.h
1 /*
2  * Copyright 2008,2010 Freescale Semiconductor, Inc
3  * Andy Fleming
4  *
5  * Based (loosely) on the Linux code
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef _MMC_H_
11 #define _MMC_H_
12
13 #include <linux/list.h>
14 #include <linux/compiler.h>
15
16 #define SD_VERSION_SD   0x20000
17 #define SD_VERSION_3    (SD_VERSION_SD | 0x300)
18 #define SD_VERSION_2    (SD_VERSION_SD | 0x200)
19 #define SD_VERSION_1_0  (SD_VERSION_SD | 0x100)
20 #define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a)
21 #define MMC_VERSION_MMC         0x10000
22 #define MMC_VERSION_UNKNOWN     (MMC_VERSION_MMC)
23 #define MMC_VERSION_1_2         (MMC_VERSION_MMC | 0x102)
24 #define MMC_VERSION_1_4         (MMC_VERSION_MMC | 0x104)
25 #define MMC_VERSION_2_2         (MMC_VERSION_MMC | 0x202)
26 #define MMC_VERSION_3           (MMC_VERSION_MMC | 0x300)
27 #define MMC_VERSION_4           (MMC_VERSION_MMC | 0x400)
28 #define MMC_VERSION_4_1         (MMC_VERSION_MMC | 0x401)
29 #define MMC_VERSION_4_2         (MMC_VERSION_MMC | 0x402)
30 #define MMC_VERSION_4_3         (MMC_VERSION_MMC | 0x403)
31 #define MMC_VERSION_4_41        (MMC_VERSION_MMC | 0x429)
32 #define MMC_VERSION_4_5         (MMC_VERSION_MMC | 0x405)
33
34 #define MMC_MODE_HS             0x001
35 #define MMC_MODE_HS_52MHz       0x010
36 #define MMC_MODE_4BIT           0x100
37 #define MMC_MODE_8BIT           0x200
38 #define MMC_MODE_SPI            0x400
39 #define MMC_MODE_HC             0x800
40
41 #define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT)
42 #define MMC_MODE_WIDTH_BITS_SHIFT 8
43
44 #define SD_DATA_4BIT    0x00040000
45
46 #define IS_SD(x) (x->version & SD_VERSION_SD)
47
48 #define MMC_DATA_READ           1
49 #define MMC_DATA_WRITE          2
50
51 #define NO_CARD_ERR             -16 /* No SD/MMC card inserted */
52 #define UNUSABLE_ERR            -17 /* Unusable Card */
53 #define COMM_ERR                -18 /* Communications Error */
54 #define TIMEOUT                 -19
55 #define IN_PROGRESS             -20 /* operation is in progress */
56
57 #define MMC_CMD_GO_IDLE_STATE           0
58 #define MMC_CMD_SEND_OP_COND            1
59 #define MMC_CMD_ALL_SEND_CID            2
60 #define MMC_CMD_SET_RELATIVE_ADDR       3
61 #define MMC_CMD_SET_DSR                 4
62 #define MMC_CMD_SWITCH                  6
63 #define MMC_CMD_SELECT_CARD             7
64 #define MMC_CMD_SEND_EXT_CSD            8
65 #define MMC_CMD_SEND_CSD                9
66 #define MMC_CMD_SEND_CID                10
67 #define MMC_CMD_STOP_TRANSMISSION       12
68 #define MMC_CMD_SEND_STATUS             13
69 #define MMC_CMD_SET_BLOCKLEN            16
70 #define MMC_CMD_READ_SINGLE_BLOCK       17
71 #define MMC_CMD_READ_MULTIPLE_BLOCK     18
72 #define MMC_CMD_WRITE_SINGLE_BLOCK      24
73 #define MMC_CMD_WRITE_MULTIPLE_BLOCK    25
74 #define MMC_CMD_ERASE_GROUP_START       35
75 #define MMC_CMD_ERASE_GROUP_END         36
76 #define MMC_CMD_ERASE                   38
77 #define MMC_CMD_APP_CMD                 55
78 #define MMC_CMD_SPI_READ_OCR            58
79 #define MMC_CMD_SPI_CRC_ON_OFF          59
80 #define MMC_CMD_RES_MAN                 62
81
82 #define MMC_CMD62_ARG1                  0xefac62ec
83 #define MMC_CMD62_ARG2                  0xcbaea7
84
85
86 #define SD_CMD_SEND_RELATIVE_ADDR       3
87 #define SD_CMD_SWITCH_FUNC              6
88 #define SD_CMD_SEND_IF_COND             8
89
90 #define SD_CMD_APP_SET_BUS_WIDTH        6
91 #define SD_CMD_ERASE_WR_BLK_START       32
92 #define SD_CMD_ERASE_WR_BLK_END         33
93 #define SD_CMD_APP_SEND_OP_COND         41
94 #define SD_CMD_APP_SEND_SCR             51
95
96 /* SCR definitions in different words */
97 #define SD_HIGHSPEED_BUSY       0x00020000
98 #define SD_HIGHSPEED_SUPPORTED  0x00020000
99
100 #define MMC_HS_TIMING           0x00000100
101 #define MMC_HS_52MHZ            0x2
102
103 #define OCR_BUSY                0x80000000
104 #define OCR_HCS                 0x40000000
105 #define OCR_VOLTAGE_MASK        0x007FFF80
106 #define OCR_ACCESS_MODE         0x60000000
107
108 #define SECURE_ERASE            0x80000000
109
110 #define MMC_STATUS_MASK         (~0x0206BF7F)
111 #define MMC_STATUS_RDY_FOR_DATA (1 << 8)
112 #define MMC_STATUS_CURR_STATE   (0xf << 9)
113 #define MMC_STATUS_ERROR        (1 << 19)
114
115 #define MMC_STATE_PRG           (7 << 9)
116
117 #define MMC_VDD_165_195         0x00000080      /* VDD voltage 1.65 - 1.95 */
118 #define MMC_VDD_20_21           0x00000100      /* VDD voltage 2.0 ~ 2.1 */
119 #define MMC_VDD_21_22           0x00000200      /* VDD voltage 2.1 ~ 2.2 */
120 #define MMC_VDD_22_23           0x00000400      /* VDD voltage 2.2 ~ 2.3 */
121 #define MMC_VDD_23_24           0x00000800      /* VDD voltage 2.3 ~ 2.4 */
122 #define MMC_VDD_24_25           0x00001000      /* VDD voltage 2.4 ~ 2.5 */
123 #define MMC_VDD_25_26           0x00002000      /* VDD voltage 2.5 ~ 2.6 */
124 #define MMC_VDD_26_27           0x00004000      /* VDD voltage 2.6 ~ 2.7 */
125 #define MMC_VDD_27_28           0x00008000      /* VDD voltage 2.7 ~ 2.8 */
126 #define MMC_VDD_28_29           0x00010000      /* VDD voltage 2.8 ~ 2.9 */
127 #define MMC_VDD_29_30           0x00020000      /* VDD voltage 2.9 ~ 3.0 */
128 #define MMC_VDD_30_31           0x00040000      /* VDD voltage 3.0 ~ 3.1 */
129 #define MMC_VDD_31_32           0x00080000      /* VDD voltage 3.1 ~ 3.2 */
130 #define MMC_VDD_32_33           0x00100000      /* VDD voltage 3.2 ~ 3.3 */
131 #define MMC_VDD_33_34           0x00200000      /* VDD voltage 3.3 ~ 3.4 */
132 #define MMC_VDD_34_35           0x00400000      /* VDD voltage 3.4 ~ 3.5 */
133 #define MMC_VDD_35_36           0x00800000      /* VDD voltage 3.5 ~ 3.6 */
134
135 #define MMC_SWITCH_MODE_CMD_SET         0x00 /* Change the command set */
136 #define MMC_SWITCH_MODE_SET_BITS        0x01 /* Set bits in EXT_CSD byte
137                                                 addressed by index which are
138                                                 1 in value field */
139 #define MMC_SWITCH_MODE_CLEAR_BITS      0x02 /* Clear bits in EXT_CSD byte
140                                                 addressed by index, which are
141                                                 1 in value field */
142 #define MMC_SWITCH_MODE_WRITE_BYTE      0x03 /* Set target byte to value */
143
144 #define SD_SWITCH_CHECK         0
145 #define SD_SWITCH_SWITCH        1
146
147 /*
148  * EXT_CSD fields
149  */
150 #define EXT_CSD_GP_SIZE_MULT            143     /* R/W */
151 #define EXT_CSD_PARTITIONS_ATTRIBUTE    156     /* R/W */
152 #define EXT_CSD_PARTITIONING_SUPPORT    160     /* RO */
153 #define EXT_CSD_RPMB_MULT               168     /* RO */
154 #define EXT_CSD_ERASE_GROUP_DEF         175     /* R/W */
155 #define EXT_CSD_BOOT_BUS_WIDTH          177
156 #define EXT_CSD_PART_CONF               179     /* R/W */
157 #define EXT_CSD_BUS_WIDTH               183     /* R/W */
158 #define EXT_CSD_HS_TIMING               185     /* R/W */
159 #define EXT_CSD_REV                     192     /* RO */
160 #define EXT_CSD_CARD_TYPE               196     /* RO */
161 #define EXT_CSD_SEC_CNT                 212     /* RO, 4 bytes */
162 #define EXT_CSD_HC_WP_GRP_SIZE          221     /* RO */
163 #define EXT_CSD_HC_ERASE_GRP_SIZE       224     /* RO */
164 #define EXT_CSD_BOOT_MULT               226     /* RO */
165
166 /*
167  * EXT_CSD field definitions
168  */
169
170 #define EXT_CSD_CMD_SET_NORMAL          (1 << 0)
171 #define EXT_CSD_CMD_SET_SECURE          (1 << 1)
172 #define EXT_CSD_CMD_SET_CPSECURE        (1 << 2)
173
174 #define EXT_CSD_CARD_TYPE_26    (1 << 0)        /* Card can run at 26MHz */
175 #define EXT_CSD_CARD_TYPE_52    (1 << 1)        /* Card can run at 52MHz */
176
177 #define EXT_CSD_BUS_WIDTH_1     0       /* Card is in 1 bit mode */
178 #define EXT_CSD_BUS_WIDTH_4     1       /* Card is in 4 bit mode */
179 #define EXT_CSD_BUS_WIDTH_8     2       /* Card is in 8 bit mode */
180
181 #define EXT_CSD_BOOT_ACK_ENABLE                 (1 << 6)
182 #define EXT_CSD_BOOT_PARTITION_ENABLE           (1 << 3)
183 #define EXT_CSD_PARTITION_ACCESS_ENABLE         (1 << 0)
184 #define EXT_CSD_PARTITION_ACCESS_DISABLE        (0 << 0)
185
186 #define EXT_CSD_BOOT_ACK(x)             (x << 6)
187 #define EXT_CSD_BOOT_PART_NUM(x)        (x << 3)
188 #define EXT_CSD_PARTITION_ACCESS(x)     (x << 0)
189
190
191 #define R1_ILLEGAL_COMMAND              (1 << 22)
192 #define R1_APP_CMD                      (1 << 5)
193
194 #define MMC_RSP_PRESENT (1 << 0)
195 #define MMC_RSP_136     (1 << 1)                /* 136 bit response */
196 #define MMC_RSP_CRC     (1 << 2)                /* expect valid crc */
197 #define MMC_RSP_BUSY    (1 << 3)                /* card may send busy */
198 #define MMC_RSP_OPCODE  (1 << 4)                /* response contains opcode */
199
200 #define MMC_RSP_NONE    (0)
201 #define MMC_RSP_R1      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
202 #define MMC_RSP_R1b     (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \
203                         MMC_RSP_BUSY)
204 #define MMC_RSP_R2      (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
205 #define MMC_RSP_R3      (MMC_RSP_PRESENT)
206 #define MMC_RSP_R4      (MMC_RSP_PRESENT)
207 #define MMC_RSP_R5      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
208 #define MMC_RSP_R6      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
209 #define MMC_RSP_R7      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
210
211 #define MMCPART_NOAVAILABLE     (0xff)
212 #define PART_ACCESS_MASK        (0x7)
213 #define PART_SUPPORT            (0x1)
214 #define PART_ENH_ATTRIB         (0x1f)
215
216 /* Maximum block size for MMC */
217 #define MMC_MAX_BLOCK_LEN       512
218
219 /* The number of MMC physical partitions.  These consist of:
220  * boot partitions (2), general purpose partitions (4) in MMC v4.4.
221  */
222 #define MMC_NUM_BOOT_PARTITION  2
223
224 struct mmc_cid {
225         unsigned long psn;
226         unsigned short oid;
227         unsigned char mid;
228         unsigned char prv;
229         unsigned char mdt;
230         char pnm[7];
231 };
232
233 struct mmc_cmd {
234         ushort cmdidx;
235         uint resp_type;
236         uint cmdarg;
237         uint response[4];
238 };
239
240 struct mmc_data {
241         union {
242                 char *dest;
243                 const char *src; /* src buffers don't get written to */
244         };
245         uint flags;
246         uint blocks;
247         uint blocksize;
248 };
249
250 struct mmc {
251         struct list_head link;
252         char name[32];
253         void *priv;
254         uint voltages;
255         uint version;
256         uint has_init;
257         uint f_min;
258         uint f_max;
259         int high_capacity;
260         uint bus_width;
261         uint clock;
262         uint card_caps;
263         uint host_caps;
264         uint ocr;
265         uint scr[2];
266         uint csd[4];
267         uint cid[4];
268         ushort rca;
269         char part_config;
270         char part_num;
271         uint tran_speed;
272         uint read_bl_len;
273         uint write_bl_len;
274         uint erase_grp_size;
275         u64 capacity;
276         u64 capacity_user;
277         u64 capacity_boot;
278         u64 capacity_rpmb;
279         u64 capacity_gp[4];
280         block_dev_desc_t block_dev;
281         int (*send_cmd)(struct mmc *mmc,
282                         struct mmc_cmd *cmd, struct mmc_data *data);
283         void (*set_ios)(struct mmc *mmc);
284         int (*init)(struct mmc *mmc);
285         int (*getcd)(struct mmc *mmc);
286         int (*getwp)(struct mmc *mmc);
287         uint b_max;
288         char op_cond_pending;   /* 1 if we are waiting on an op_cond command */
289         char init_in_progress;  /* 1 if we have done mmc_start_init() */
290         char preinit;           /* start init as early as possible */
291         uint op_cond_response;  /* the response byte from the last op_cond */
292 };
293
294 int mmc_register(struct mmc *mmc);
295 int mmc_initialize(bd_t *bis);
296 int mmc_init(struct mmc *mmc);
297 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size);
298 void mmc_set_clock(struct mmc *mmc, uint clock);
299 struct mmc *find_mmc_device(int dev_num);
300 int mmc_set_dev(int dev_num);
301 void print_mmc_devices(char separator);
302 int get_mmc_num(void);
303 int board_mmc_getcd(struct mmc *mmc);
304 int mmc_switch_part(int dev_num, unsigned int part_num);
305 int mmc_getcd(struct mmc *mmc);
306 int mmc_getwp(struct mmc *mmc);
307 /* Function to change the size of boot partition and rpmb partitions */
308 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
309                                         unsigned long rpmbsize);
310 /* Function to send commands to open/close the specified boot partition */
311 int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
312
313 /**
314  * Start device initialization and return immediately; it does not block on
315  * polling OCR (operation condition register) status.  Then you should call
316  * mmc_init, which would block on polling OCR status and complete the device
317  * initializatin.
318  *
319  * @param mmc   Pointer to a MMC device struct
320  * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error.
321  */
322 int mmc_start_init(struct mmc *mmc);
323
324 /**
325  * Set preinit flag of mmc device.
326  *
327  * This will cause the device to be pre-inited during mmc_initialize(),
328  * which may save boot time if the device is not accessed until later.
329  * Some eMMC devices take 200-300ms to init, but unfortunately they
330  * must be sent a series of commands to even get them to start preparing
331  * for operation.
332  *
333  * @param mmc           Pointer to a MMC device struct
334  * @param preinit       preinit flag value
335  */
336 void mmc_set_preinit(struct mmc *mmc, int preinit);
337
338 #ifdef CONFIG_GENERIC_MMC
339 #ifdef CONFIG_MMC_SPI
340 #define mmc_host_is_spi(mmc)    ((mmc)->host_caps & MMC_MODE_SPI)
341 #else
342 #define mmc_host_is_spi(mmc)    0
343 #endif
344 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
345 #else
346 int mmc_legacy_init(int verbose);
347 #endif
348
349 #endif /* _MMC_H_ */