]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/nios2-yanu.h
Exynos5420: Introduce support for the Peach-Pit board
[karo-tx-uboot.git] / include / nios2-yanu.h
1 /*
2  * (C) Copyright 2006, Imagos S.a.s <www.imagos.it>
3  * Renato Andreola <renato.andreola@imagos.it>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*************************************************************************
9  * Altera NiosII YANU serial interface by Imagos
10  * please see  http://www.opencores.org/project,yanu for
11  * information/downloads
12  ************************************************************************/
13
14 #ifndef __NIOS2_YANU_H__
15 #define __NIOS2_YANU_H__
16
17 #define YANU_MAX_PRESCALER_N   ((1 << 4) - 1)   /* 15 */
18 #define YANU_MAX_PRESCALER_M   ((1 << 11) -1)   /* 2047 */
19 #define YANU_FIFO_SIZE         (16)
20 #define YANU_RXFIFO_SIZE       (YANU_FIFO_SIZE)
21 #define YANU_TXFIFO_SIZE       (YANU_FIFO_SIZE)
22
23 #define YANU_RXFIFO_DLY        (10*11)
24 #define YANU_TXFIFO_THR        (10)
25 #define YANU_DATA_CHAR_MASK    (0xFF)
26
27 /* data register */
28 #define YANU_DATA_OFFSET       (0)      /* data register offset */
29
30 #define YANU_CONTROL_OFFSET    (4)      /* control register offset */
31 /* interrupt enable */
32 #define YANU_CONTROL_IE_RRDY   (1<<0)   /* ie on received character ready */
33 #define YANU_CONTROL_IE_OE     (1<<1)   /* ie on rx overrun    */
34 #define YANU_CONTROL_IE_BRK    (1<<2)   /* ie on break detect  */
35 #define YANU_CONTROL_IE_FE     (1<<3)   /* ie on framing error */
36 #define YANU_CONTROL_IE_PE     (1<<4)   /* ie on parity error  */
37 #define YANU_CONTROL_IE_TRDY   (1<<5)   /* ie interrupt on tranmitter ready */
38 /* control bits */
39 #define YANU_CONTROL_BITS_POS  (6)      /* bits number pos */
40 #define YANU_CONTROL_BITS      (1<<YANU_CONTROL_BITS_POS)       /* number of rx/tx bits per word. 3 bit unsigned integer */
41 #define YANU_CONTROL_BITS_N    (3)      /* ... its bit filed length */
42 #define YANU_CONTROL_PARENA    (1<<9)   /*  enable parity bit transmission/reception */
43 #define YANU_CONTROL_PAREVEN   (1<<10)  /* parity even */
44 #define YANU_CONTROL_STOPS     (1<<11)  /* number of stop bits */
45 #define YANU_CONTROL_HHENA     (1<<12)  /* Harware Handshake enable... */
46 #define YANU_CONTROL_FORCEBRK  (1<<13)  /* if set than txd = active (0) */
47 /* tuning part */
48 #define YANU_CONTROL_RDYDLY    (1<<14)  /* delay from "first" before setting rrdy (in bit) */
49 #define YANU_CONTROL_RDYDLY_N  (8)      /* ... its bit filed length */
50 #define YANU_CONTROL_TXTHR     (1<<22)  /* tx interrupt threshold: the trdy set if txfifo_chars<= txthr (chars) */
51 #define YANU_CONTROL_TXTHR_N   (4)      /* ... its bit field length */
52
53 #define YANU_BAUD_OFFSET  (8)   /* baud register offset */
54 #define YANU_BAUDM        (1<<0)        /* baud mantissa lsb */
55 #define YANU_BAUDM_N      (12)  /* ...its bit filed length */
56 #define YANU_BAUDE        (1<<12)       /* baud exponent lsb */
57 #define YANU_BAUDE_N      (4)   /* ...its bit field length */
58
59 #define YANU_ACTION_OFFSET   (12)       /* action register... write only */
60 #define YANU_ACTION_RRRDY    (1<<0)     /* reset rrdy */
61 #define YANU_ACTION_ROE      (1<<1)     /* reset oe */
62 #define YANU_ACTION_RBRK     (1<<2)     /* reset brk */
63 #define YANU_ACTION_RFE      (1<<3)     /* reset fe  */
64 #define YANU_ACTION_RPE      (1<<4)     /* reset pe  */
65 #define YANU_ACTION_SRRDY    (1<<5)     /* set rrdy  */
66 #define YANU_ACTION_SOE      (1<<6)     /* set oe    */
67 #define YANU_ACTION_SBRK     (1<<7)     /* set brk   */
68 #define YANU_ACTION_SFE      (1<<8)     /* set fe    */
69 #define YANU_ACTION_SPE      (1<<9)     /* set pe    */
70 #define YANU_ACTION_RFIFO_PULL  (1<<10) /* pull a char from rx fifo we MUST do it before taking a char */
71 #define YANU_ACTION_RFIFO_CLEAR (1<<11) /* clear rx fifo */
72 #define YANU_ACTION_TFIFO_CLEAR (1<<12) /* clear tx fifo */
73 #define YANU_ACTION_RTRDY       (1<<13) /* clear trdy    */
74 #define YANU_ACTION_STRDY       (1<<14) /* set trdy      */
75
76 #define YANU_STATUS_OFFSET   (16)
77 #define YANU_STATUS_RRDY     (1<<0)     /* rxrdy flag */
78 #define YANU_STATUS_TRDY     (1<<1)     /* txrdy flag */
79 #define YANU_STATUS_OE       (1<<2)     /* rx overrun error */
80 #define YANU_STATUS_BRK      (1<<3)     /* rx break detect flag */
81 #define YANU_STATUS_FE       (1<<4)     /* rx framing error flag */
82 #define YANU_STATUS_PE       (1<<5)     /* rx parity erro flag */
83 #define YANU_RFIFO_CHARS_POS (6)
84 #define YANU_RFIFO_CHARS     (1<<RFIFO_CHAR_POS)        /* number of chars into rx fifo */
85 #define YANU_RFIFO_CHARS_N   (5)        /* ...its bit field length: 32 chars */
86 #define YANU_TFIFO_CHARS_POS (11)
87 #define YANU_TFIFO_CHARS     (1<<TFIFO_CHAR_POS)        /* number of chars into tx fifo */
88 #define YANU_TFIFO_CHARS_N   (5)        /* ...its bit field length: 32 chars */
89
90 typedef volatile struct yanu_uart_t {
91         volatile unsigned data;
92         volatile unsigned control;      /* control register (RW) 32-bit   */
93         volatile unsigned baud; /* baud/prescaler register (RW) 32-bit */
94         volatile unsigned action;       /* action register (W) 32-bit */
95         volatile unsigned status;       /* status register (R) 32-bit */
96         volatile unsigned magic;        /* magic register (R) 32-bit */
97 } yanu_uart_t;
98
99 #endif