]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/palmas.h
fw_env: calculate default number of env sectors
[karo-tx-uboot.git] / include / palmas.h
1 /*
2  * (C) Copyright 2012-2013
3  * Texas Instruments, <www.ti.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7 #ifndef PALMAS_H
8 #define PALMAS_H
9
10 #include <common.h>
11 #include <i2c.h>
12
13 /* I2C chip addresses, TW6035/37 */
14 #define TWL603X_CHIP_P1         0x48    /* Page 1 */
15 #define TWL603X_CHIP_P2         0x49    /* Page 2 */
16 #define TWL603X_CHIP_P3         0x4a    /* Page 3 */
17
18 /* TPS659038/39 */
19 #define TPS65903X_CHIP_P1       0x58    /* Page 1 */
20
21 /* Page 1 registers (0x1XY translates to page 1, reg addr 0xXY): */
22
23 /* LDO1 control/voltage */
24 #define LDO1_CTRL               0x50
25 #define LDO1_VOLTAGE            0x51
26
27 /* LDO9 control/voltage */
28 #define LDO9_CTRL               0x60
29 #define LDO9_VOLTAGE            0x61
30
31 /* LDOUSB control/voltage */
32 #define LDOUSB_CTRL             0x64
33 #define LDOUSB_VOLTAGE          0x65
34 #define LDO_CTRL                0x6a
35
36 /* Control of 32 kHz audio clock */
37 #define CLK32KGAUDIO_CTRL       0xd5
38
39 /* SYSEN2_CTRL for VCC_3v3_AUX supply on the sEVM */
40 #define SYSEN2_CTRL             0xd9
41
42 /*
43  * Bit field definitions for LDOx_CTRL, SYSENx_CTRL
44  * and some other xxx_CTRL resources:
45  */
46 #define LDO9_BYP_EN             (1 << 6)        /* LDO9 only! */
47 #define RSC_STAT_ON             (1 << 4)        /* RO status bit! */
48 #define RSC_MODE_SLEEP          (1 << 2)
49 #define RSC_MODE_ACTIVE         (1 << 0)
50
51 /* Some LDO voltage values */
52 #define LDO_VOLT_OFF            0
53 #define LDO_VOLT_1V8            0x13
54 #define LDO_VOLT_3V0            0x2b
55 #define LDO_VOLT_3V3            0x31
56 /* Request bypass, LDO9 only */
57 #define LDO9_BYPASS             0x3f
58
59 /* SMPS7_CTRL */
60 #define SMPS7_CTRL              0x30
61
62 /* SMPS9_CTRL */
63 #define SMPS9_CTRL              0x38
64 #define SMPS9_VOLTAGE           0x3b
65
66 /* SMPS10_CTRL */
67 #define SMPS10_CTRL             0x3c
68 #define SMPS10_MODE_ACTIVE_D    0x0d
69
70 /* Bit field definitions for SMPSx_CTRL */
71 #define SMPS_MODE_ACT_AUTO      1
72 #define SMPS_MODE_ACT_ECO       2
73 #define SMPS_MODE_ACT_FPWM      3
74 #define SMPS_MODE_SLP_AUTO      (1 << 2)
75 #define SMPS_MODE_SLP_ECO       (2 << 2)
76 #define SMPS_MODE_SLP_FPWM      (3 << 2)
77
78 /*
79  * Some popular SMPS voltages, all with RANGE=1; note
80  * that RANGE cannot be changed on the fly
81  */
82 #define SMPS_VOLT_OFF           0
83 #define SMPS_VOLT_1V2           0x90
84 #define SMPS_VOLT_1V8           0xae
85 #define SMPS_VOLT_2V1           0xbd
86 #define SMPS_VOLT_3V0           0xea
87 #define SMPS_VOLT_3V3           0xf9
88
89 /* Backup Battery & VRTC Control */
90 #define BB_VRTC_CTRL            0xa8
91 /* Bit definitions for BB_VRTC_CTRL */
92 #define VRTC_EN_SLP             (1 << 6)
93 #define VRTC_EN_OFF             (1 << 5)
94 #define VRTC_PWEN               (1 << 4)
95 #define BB_LOW_ICHRG            (1 << 3)
96 #define BB_HIGH_ICHRG           (0 << 3)
97 #define BB_VSEL_3V0             (0 << 1)
98 #define BB_VSEL_2V5             (1 << 1)
99 #define BB_VSEL_3V15            (2 << 1)
100 #define BB_VSEL_VBAT            (3 << 1)
101 #define BB_CHRG_EN              (1 << 0)
102
103 /*
104  * Functions to read and write from TPS659038/TWL6035/TWL6037
105  * or other Palmas family of TI PMICs
106  */
107 static inline int palmas_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
108 {
109         return i2c_write(chip_no, reg, 1, &val, 1);
110 }
111
112 static inline int palmas_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
113 {
114         return i2c_read(chip_no, reg, 1, val, 1);
115 }
116
117 void palmas_init_settings(void);
118 int palmas_mmc1_poweron_ldo(void);
119 int twl603x_mmc1_set_ldo9(u8 vsel);
120 int twl603x_audio_power(u8 on);
121 int twl603x_enable_bb_charge(u8 bb_fields);
122 int palmas_enable_ss_ldo(void);
123
124 #endif /* PALMAS_H */