# # (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundatio; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # VERSION = 1 PATCHLEVEL = 3 SUBLEVEL = 3 EXTRAVERSION = U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h HOSTARCH := $(shell uname -m | \ sed -e s/i.86/i386/ \ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ \ -e s/sa110/arm/ \ -e s/powerpc/ppc/ \ -e s/ppc64/ppc/ \ -e s/macppc/ppc/) HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ sed -e 's/\(cygwin\).*/cygwin/') export HOSTARCH HOSTOS # Deal with colliding definitions from tcsh etc. VENDOR= ######################################################################### # Allow for silent builds ifeq (,$(findstring s,$(MAKEFLAGS))) XECHO = echo else XECHO = : endif ######################################################################### # # U-boot build supports producing a object files to the separate external # directory. Two use cases are supported: # # 1) Add O= to the make command line # 'make O=/tmp/build all' # # 2) Set environement variable BUILD_DIR to point to the desired location # 'export BUILD_DIR=/tmp/build' # 'make' # # The second approach can also be used with a MAKEALL script # 'export BUILD_DIR=/tmp/build' # './MAKEALL' # # Command line 'O=' setting overrides BUILD_DIR environent variable. # # When none of the above methods is used the local build is performed and # the object files are placed in the source directory. # ifdef O ifeq ("$(origin O)", "command line") BUILD_DIR := $(O) endif endif ifneq ($(BUILD_DIR),) saved-output := $(BUILD_DIR) # Attempt to create a output directory. $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) # Verify if it was successful. BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) endif # ifneq ($(BUILD_DIR),) OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) SRCTREE := $(CURDIR) TOPDIR := $(SRCTREE) LNDIR := $(OBJTREE) export TOPDIR SRCTREE OBJTREE MKCONFIG := $(SRCTREE)/mkconfig export MKCONFIG ifneq ($(OBJTREE),$(SRCTREE)) REMOTE_BUILD := 1 export REMOTE_BUILD endif # $(obj) and (src) are defined in config.mk but here in main Makefile # we also need them before config.mk is included which is the case for # some targets like unconfig, clean, clobber, distclean, etc. ifneq ($(OBJTREE),$(SRCTREE)) obj := $(OBJTREE)/ src := $(SRCTREE)/ else obj := src := endif export obj src # Make sure CDPATH settings don't interfere unexport CDPATH ######################################################################### ifeq ($(ARCH),powerpc) ARCH = ppc endif ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) # load ARCH, BOARD, and CPU configuration include $(obj)include/config.mk export ARCH CPU BOARD VENDOR SOC ifndef CROSS_COMPILE ifeq ($(HOSTARCH),$(ARCH)) CROSS_COMPILE = else ifeq ($(ARCH),ppc) CROSS_COMPILE = ppc_8xx- endif ifeq ($(ARCH),arm) CROSS_COMPILE = arm-linux- endif ifeq ($(ARCH),i386) CROSS_COMPILE = i386-linux- endif ifeq ($(ARCH),mips) CROSS_COMPILE = mips_4KC- endif ifeq ($(ARCH),nios) CROSS_COMPILE = nios-elf- endif ifeq ($(ARCH),nios2) CROSS_COMPILE = nios2-elf- endif ifeq ($(ARCH),m68k) CROSS_COMPILE = m68k-elf- endif ifeq ($(ARCH),microblaze) CROSS_COMPILE = mb- endif ifeq ($(ARCH),blackfin) CROSS_COMPILE = bfin-uclinux- endif ifeq ($(ARCH),avr32) CROSS_COMPILE = avr32-linux- endif ifeq ($(ARCH),sh) CROSS_COMPILE = sh4-linux- endif ifeq ($(ARCH),sparc) CROSS_COMPILE = sparc-elf- endif # sparc endif # HOSTARCH,ARCH endif # CROSS_COMPILE export CROSS_COMPILE # load other configuration include $(TOPDIR)/config.mk ######################################################################### # U-Boot objects....order is important (i.e. start must be first) OBJS = cpu/$(CPU)/start.o ifeq ($(CPU),i386) OBJS += cpu/$(CPU)/start16.o OBJS += cpu/$(CPU)/reset.o endif ifeq ($(CPU),ppc4xx) OBJS += cpu/$(CPU)/resetvec.o endif ifeq ($(CPU),mpc85xx) OBJS += cpu/$(CPU)/resetvec.o endif OBJS := $(addprefix $(obj),$(OBJS)) LIBS = lib_generic/libgeneric.a LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) LIBS += cpu/$(CPU)/lib$(CPU).a ifdef SOC LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a endif ifeq ($(CPU),ixp) LIBS += cpu/ixp/npe/libnpe.a endif LIBS += lib_$(ARCH)/lib$(ARCH).a LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a LIBS += net/libnet.a LIBS += disk/libdisk.a LIBS += drivers/bios_emulator/libatibiosemu.a LIBS += drivers/block/libblock.a LIBS += drivers/dma/libdma.a LIBS += drivers/hwmon/libhwmon.a LIBS += drivers/i2c/libi2c.a LIBS += drivers/input/libinput.a LIBS += drivers/misc/libmisc.a LIBS += drivers/mtd/libmtd.a LIBS += drivers/mtd/nand/libnand.a LIBS += drivers/mtd/nand_legacy/libnand_legacy.a LIBS += drivers/mtd/onenand/libonenand.a LIBS += drivers/mtd/spi/libspi_flash.a LIBS += drivers/net/libnet.a LIBS += drivers/net/sk98lin/libsk98lin.a LIBS += drivers/pci/libpci.a LIBS += drivers/pcmcia/libpcmcia.a LIBS += drivers/spi/libspi.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a endif ifeq ($(CPU),mpc85xx) LIBS += drivers/qe/qe.a endif LIBS += drivers/rtc/librtc.a LIBS += drivers/serial/libserial.a LIBS += drivers/usb/libusb.a LIBS += drivers/video/libvideo.a LIBS += common/libcommon.a LIBS += libfdt/libfdt.a LIBS += api/libapi.a LIBS += post/libpost.a LIBS := $(addprefix $(obj),$(LIBS)) .PHONY : $(LIBS) $(VERSION_FILE) LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) # Add GCC lib PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc # The "tools" are needed early, so put this first # Don't include stuff already done in $(LIBS) SUBDIRS = tools \ examples \ api_examples .PHONY : $(SUBDIRS) ifeq ($(CONFIG_NAND_U_BOOT),y) NAND_SPL = nand_spl U_BOOT_NAND = $(obj)u-boot-nand.bin endif ifeq ($(CONFIG_ONENAND_U_BOOT),y) ONENAND_IPL = onenand_ipl U_BOOT_ONENAND = $(obj)u-boot-onenand.bin endif __OBJS := $(subst $(obj),,$(OBJS)) __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) ######################################################################### ######################################################################### ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) ifeq ($(ARCH),blackfin) ALL += $(obj)u-boot.ldr endif all: $(ALL) $(obj)u-boot.hex: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ $(obj)u-boot.srec: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ $(obj)u-boot.bin: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ $(obj)u-boot.ldr: $(obj)u-boot $(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS) $(obj)u-boot.ldr.hex: $(obj)u-boot.ldr $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary $(obj)u-boot.ldr.srec: $(obj)u-boot.ldr $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary $(obj)u-boot.img: $(obj)u-boot.bin ./tools/mkimage -A $(ARCH) -T firmware -C none \ -a $(TEXT_BASE) -e 0 \ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ $(obj)u-boot.sha1: $(obj)u-boot.bin $(obj)tools/ubsha1 $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot $(OBJS): depend $(obj)include/autoconf.mk $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) $(LIBS): depend $(obj)include/autoconf.mk $(MAKE) -C $(dir $(subst $(obj),,$@)) $(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk $(MAKE) -C $(dir $(subst $(obj),,$@)) $(SUBDIRS): depend $(obj)include/autoconf.mk $(MAKE) -C $@ all $(LDSCRIPT): depend $(obj)include/autoconf.mk $(MAKE) -C $(dir $@) $(notdir $@) $(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk $(MAKE) -C nand_spl/board/$(BOARDDIR) all $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin $(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all $(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin $(VERSION_FILE): @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \ ) > $@.tmp @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ gdbtools: $(MAKE) -C tools/gdb all || exit 1 updater: $(MAKE) -C tools/updater all || exit 1 env: $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 depend dep: $(VERSION_FILE) for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done TAG_SUBDIRS += include TAG_SUBDIRS += lib_generic board/$(BOARDDIR) TAG_SUBDIRS += cpu/$(CPU) TAG_SUBDIRS += lib_$(ARCH) TAG_SUBDIRS += fs/cramfs TAG_SUBDIRS += fs/fat TAG_SUBDIRS += fs/fdos TAG_SUBDIRS += fs/jffs2 TAG_SUBDIRS += net TAG_SUBDIRS += disk TAG_SUBDIRS += common TAG_SUBDIRS += drivers/bios_emulator TAG_SUBDIRS += drivers/block TAG_SUBDIRS += drivers/hwmon TAG_SUBDIRS += drivers/i2c TAG_SUBDIRS += drivers/input TAG_SUBDIRS += drivers/misc TAG_SUBDIRS += drivers/mtd TAG_SUBDIRS += drivers/mtd/nand TAG_SUBDIRS += drivers/mtd/nand_legacy TAG_SUBDIRS += drivers/mtd/onenand TAG_SUBDIRS += drivers/mtd/spi TAG_SUBDIRS += drivers/net TAG_SUBDIRS += drivers/net/sk98lin TAG_SUBDIRS += drivers/pci TAG_SUBDIRS += drivers/pcmcia TAG_SUBDIRS += drivers/qe TAG_SUBDIRS += drivers/rtc TAG_SUBDIRS += drivers/serial TAG_SUBDIRS += drivers/spi TAG_SUBDIRS += drivers/usb TAG_SUBDIRS += drivers/video tags ctags: ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \ -name '*.[ch]' -print` etags: etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \ -name '*.[ch]' -print` cscope: find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \ > cscope.files cscope -b -q -k $(obj)System.map: $(obj)u-boot @$(NM) $< | \ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ sort > $(obj)System.map # # Auto-generate the autoconf.mk file (which is included by all makefiles) # # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. # the dep file is only include in this top level makefile to determine when # to regenerate the autoconf.mk file. $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h @$(XECHO) Generating $@ ; \ set -e ; \ : Generate the dependancies ; \ $(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \ -MQ $(obj)include/autoconf.mk include/common.h > $@ $(obj)include/autoconf.mk: $(obj)include/config.h @$(XECHO) Generating $@ ; \ set -e ; \ : Extract the config macros ; \ $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ sed -n -f tools/scripts/define2mk.sed > $@ sinclude $(obj)include/autoconf.mk.dep ######################################################################### else # !config.mk all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ $(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \ dep tags ctags etags cscope $(obj)System.map: @echo "System not configured - see README" >&2 @ exit 1 endif # config.mk .PHONY : CHANGELOG CHANGELOG: git log --no-merges U-Boot-1_1_5.. | \ unexpand -a | sed -e 's/\s\s*$$//' > $@ ######################################################################### unconfig: @rm -f $(obj)include/config.h $(obj)include/config.mk \ $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep #======================================================================== # PowerPC #======================================================================== ######################################################################### ## MPC5xx Systems ######################################################################### canmb_config: unconfig @$(MKCONFIG) -a canmb ppc mpc5xxx canmb cmi_mpc5xx_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi PATI_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl ######################################################################### ## MPC5xxx Systems ######################################################################### aev_config: unconfig @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc BC3450_config: unconfig @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 cpci5200_config: unconfig @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd hmi1001_config: unconfig @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 Lite5200_config \ Lite5200_LOWBOOT_config \ Lite5200_LOWBOOT08_config \ icecube_5200_config \ icecube_5200_LOWBOOT_config \ icecube_5200_LOWBOOT08_config \ icecube_5200_DDR_config \ icecube_5200_DDR_LOWBOOT_config \ icecube_5200_DDR_LOWBOOT08_config \ icecube_5100_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @[ -z "$(findstring LOWBOOT_,$@)" ] || \ { if [ "$(findstring DDR,$@)" ] ; \ then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ fi ; \ $(XECHO) "... with LOWBOOT configuration" ; \ } @[ -z "$(findstring LOWBOOT08,$@)" ] || \ { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ echo "... with 8 MB flash only" ; \ $(XECHO) "... with LOWBOOT configuration" ; \ } @[ -z "$(findstring DDR,$@)" ] || \ { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ $(XECHO) "... DDR memory revision" ; \ } @[ -z "$(findstring 5200,$@)" ] || \ { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ $(XECHO) "... with MPC5200 processor" ; \ } @[ -z "$(findstring 5100,$@)" ] || \ { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ $(XECHO) "... with MGT5100 processor" ; \ } @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube jupiter_config: unconfig @$(MKCONFIG) jupiter ppc mpc5xxx jupiter v38b_config: unconfig @$(MKCONFIG) -a v38b ppc mpc5xxx v38b inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 lite5200b_config \ lite5200b_PM_config \ lite5200b_LOWBOOT_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h @ $(XECHO) "... DDR memory revision" @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h @[ -z "$(findstring _PM_,$@)" ] || \ { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ $(XECHO) "... with power management (low-power mode) support" ; \ } @[ -z "$(findstring LOWBOOT_,$@)" ] || \ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ $(XECHO) "... with LOWBOOT configuration" ; \ } @ $(XECHO) "... with MPC5200B processor" @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube mcc200_config \ mcc200_SDRAM_config \ mcc200_highboot_config \ mcc200_COM12_config \ mcc200_COM12_SDRAM_config \ mcc200_COM12_highboot_config \ mcc200_COM12_highboot_SDRAM_config \ mcc200_highboot_SDRAM_config \ prs200_config \ prs200_DDR_config \ prs200_highboot_config \ prs200_highboot_DDR_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/mcc200 @[ -n "$(findstring highboot,$@)" ] || \ { $(XECHO) "... with lowboot configuration" ; \ } @[ -z "$(findstring highboot,$@)" ] || \ { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ $(XECHO) "... with highboot configuration" ; \ } @[ -n "$(findstring _SDRAM,$@)" ] || \ { if [ -n "$(findstring mcc200,$@)" ]; \ then \ $(XECHO) "... with DDR" ; \ else \ if [ -n "$(findstring _DDR,$@)" ];\ then \ $(XECHO) "... with DDR" ; \ else \ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ $(XECHO) "... with SDRAM" ; \ fi; \ fi; \ } @[ -z "$(findstring _SDRAM,$@)" ] || \ { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ $(XECHO) "... with SDRAM" ; \ } @[ -z "$(findstring COM12,$@)" ] || \ { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ $(XECHO) "... with console on COM12" ; \ } @[ -z "$(findstring prs200,$@)" ] || \ { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ } @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 mecp5200_config: unconfig @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd munices_config: unconfig @$(MKCONFIG) munices ppc mpc5xxx munices o2dnt_config: unconfig @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt pf5200_config: unconfig @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd PM520_config \ PM520_DDR_config \ PM520_ROMBOOT_config \ PM520_ROMBOOT_DDR_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring DDR,$@)" ] || \ { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ $(XECHO) "... DDR memory revision" ; \ } @[ -z "$(findstring ROMBOOT,$@)" ] || \ { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ $(XECHO) "... booting from 8-bit flash" ; \ } @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc cm5200_config: unconfig @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 spieval_config: unconfig @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc TB5200_B_config \ TB5200_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _B,$@)" ] || \ { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ $(XECHO) "... with MPC5200B processor" ; \ } @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc MINI5200_config \ EVAL5200_config \ TOP5200_config: unconfig @mkdir -p $(obj)include @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk Total5100_config \ Total5200_config \ Total5200_lowboot_config \ Total5200_Rev2_config \ Total5200_Rev2_lowboot_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/total5200 @[ -z "$(findstring 5100,$@)" ] || \ { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ $(XECHO) "... with MGT5100 processor" ; \ } @[ -z "$(findstring 5200,$@)" ] || \ { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ $(XECHO) "... with MPC5200 processor" ; \ } @[ -n "$(findstring Rev,$@)" ] || \ { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ $(XECHO) "... revision 1 board" ; \ } @[ -z "$(findstring Rev2_,$@)" ] || \ { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ $(XECHO) "... revision 2 board" ; \ } @[ -z "$(findstring lowboot_,$@)" ] || \ { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ $(XECHO) "... with lowboot configuration" ; \ } @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 cam5200_config \ cam5200_niosflash_config \ fo300_config \ MiniFAP_config \ TQM5200S_config \ TQM5200S_HIGHBOOT_config \ TQM5200_B_config \ TQM5200_B_HIGHBOOT_config \ TQM5200_config \ TQM5200_STK100_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/tqc/tqm5200 @[ -z "$(findstring cam5200,$@)" ] || \ { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ $(XECHO) "... TQM5200S on Cam5200" ; \ } @[ -z "$(findstring niosflash,$@)" ] || \ { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ $(XECHO) "... with NIOS flash driver" ; \ } @[ -z "$(findstring fo300,$@)" ] || \ { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ $(XECHO) "... TQM5200 on FO300" ; \ } @[ -z "$(findstring MiniFAP,$@)" ] || \ { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ $(XECHO) "... TQM5200_AC on MiniFAP" ; \ } @[ -z "$(findstring STK100,$@)" ] || \ { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ $(XECHO) "... on a STK52XX.100 base board" ; \ } @[ -z "$(findstring TQM5200_B,$@)" ] || \ { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring TQM5200S,$@)" ] || \ { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring HIGHBOOT,$@)" ] || \ { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ } @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc uc101_config: unconfig @$(MKCONFIG) uc101 ppc mpc5xxx uc101 motionpro_config: unconfig @$(MKCONFIG) motionpro ppc mpc5xxx motionpro ######################################################################### ## MPC512x Systems ######################################################################### ads5121_config \ ads5121_PCI_config \ : unconfig @mkdir -p $(obj)include @if [ "$(findstring _PCI_,$@)" ] ; then \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ $(XECHO) "... with PCI enabled" ; \ fi @$(MKCONFIG) -a ads5121 ppc mpc512x ads5121 ######################################################################### ## MPC8xx Systems ######################################################################### Adder_config \ Adder87x_config \ AdderII_config \ : unconfig @mkdir -p $(obj)include $(if $(findstring AdderII,$@), \ @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) @$(MKCONFIG) -a Adder ppc mpc8xx adder AdderUSB_config: unconfig @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder ADS860_config \ FADS823_config \ FADS850SAR_config \ MPC86xADS_config \ MPC885ADS_config \ FADS860T_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads AMX860_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel c2mon_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon CCM_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens cogent_mpc8xx_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent ELPT860_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX EP88x_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x ESTEEM192E_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e ETX094_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 FLAGADM_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) GEN860T_SC_config \ GEN860T_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _SC,$@)" ] || \ { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ $(XECHO) "With reduced H/W feature set (SC)..." ; \ } @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t GENIETV_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv GTH_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth hermes_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes HMI10_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc IAD210_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) ICU862_100MHz_config \ ICU862_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ $(XECHO) "... with 100MHz system clock" ; \ } @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 IP860_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 IVML24_256_config \ IVML24_128_config \ IVML24_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring IVML24_config,$@)" ] || \ { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVML24_128_config,$@)" ] || \ { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVML24_256_config,$@)" ] || \ { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ } @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm IVMS8_256_config \ IVMS8_128_config \ IVMS8_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring IVMS8_config,$@)" ] || \ { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ } @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm KUP4K_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup KUP4X_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup LANTEC_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec lwmon_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon MBX_config \ MBX860T_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx mgsuvd_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd MHPC_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec MVS1_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx mvs1 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) NETVIA_V2_config \ NETVIA_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETVIA_config,$@)" ] || \ { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ $(XECHO) "... Version 1" ; \ } @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ $(XECHO) "... Version 2" ; \ } @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) NETPHONE_V2_config \ NETPHONE_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETPHONE_config,$@)" ] || \ { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ } @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) NETTA_ISDN_6412_SWAPHOOK_config \ NETTA_ISDN_SWAPHOOK_config \ NETTA_6412_SWAPHOOK_config \ NETTA_SWAPHOOK_config \ NETTA_ISDN_6412_config \ NETTA_ISDN_config \ NETTA_6412_config \ NETTA_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring ISDN_,$@)" ] || \ { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ } @[ -n "$(findstring ISDN_,$@)" ] || \ { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ } @[ -z "$(findstring 6412_,$@)" ] || \ { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ } @[ -n "$(findstring 6412_,$@)" ] || \ { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ } @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ } @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ } @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) NETTA2_V2_config \ NETTA2_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETTA2_config,$@)" ] || \ { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ } @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 NC650_Rev1_config \ NC650_Rev2_config \ CP850_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring CP850,$@)" ] || \ { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring Rev1,$@)" ] || \ { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring Rev2,$@)" ] || \ { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ } @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 NX823_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 pcu_e_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens QS850_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc QS823_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc QS860T_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc quantum_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum R360MPI_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi RBC823_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 RPXClassic_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic RPXlite_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite RPXlite_DW_64_config \ RPXlite_DW_LCD_config \ RPXlite_DW_64_LCD_config \ RPXlite_DW_NVRAM_config \ RPXlite_DW_NVRAM_64_config \ RPXlite_DW_NVRAM_LCD_config \ RPXlite_DW_NVRAM_64_LCD_config \ RPXlite_DW_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _64,$@)" ] || \ { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ $(XECHO) "... with 64MHz system clock ..."; \ } @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ $(XECHO) "... with LCD display ..."; \ } @[ -z "$(findstring _NVRAM,$@)" ] || \ { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ $(XECHO) "... with ENV in NVRAM ..."; \ } @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw rmu_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu RRvision_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision RRvision_LCD_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision SM850_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc spc1920_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 SPD823TS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx stxxtc_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc svm_sc8xx_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx SXNI855T_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet # EMK MPC8xx based modules TOP860_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk # Play some tricks for configuration selection # Only 855 and 860 boards may come with FEC # and only 823 boards may have LCD support xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) FPS850L_config \ FPS860L_config \ NSCU_config \ TQM823L_config \ TQM823L_LCD_config \ TQM850L_config \ TQM855L_config \ TQM860L_config \ TQM862L_config \ TQM823M_config \ TQM850M_config \ TQM855M_config \ TQM860M_config \ TQM862M_config \ TQM866M_config \ TQM885D_config \ TK885D_config \ virtlab2_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ $(XECHO) "... with LCD display" ; \ } @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc TTTech_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc uc100_config : unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 v37_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 wtk_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_LCD" >$(obj)include/config.h @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc ######################################################################### ## PPC4xx Systems ######################################################################### xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) acadia_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc acadia_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/acadia @mkdir -p $(obj)nand_spl/board/amcc/acadia @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ADCIOP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd alpr_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive AP1000_config:unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix APC405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd AR405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd ASH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd bamboo_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc bamboo_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/bamboo @mkdir -p $(obj)nand_spl/board/amcc/bamboo @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk bubinga_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc CANBT_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd # Canyonlands & Glacier use different U-Boot images canyonlands_config \ glacier_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc canyonlands_nand_config \ glacier_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/canyonlands @mkdir -p $(obj)nand_spl/board/amcc/canyonlands @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk CATcenter_config \ CATcenter_25_config \ CATcenter_33_config: unconfig @mkdir -p $(obj)include @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h @[ -z "$(findstring _25,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ $(XECHO) "SysClk = 25MHz" ; \ } @[ -z "$(findstring _33,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ $(XECHO) "SysClk = 33MHz" ; \ } @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave CPCI2DP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd CPCI405_config \ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd @echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk CPCIISER4_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd CRAYL1_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray csb272_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 csb472_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 DASA_SIM_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd DP405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd DU405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd DU440_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd ebony_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc ERIC_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric EXBITGEN_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen G2000_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 hcu4_config: unconfig @mkdir -p $(obj)board/netstal/common @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal hcu5_config: unconfig @mkdir -p $(obj)board/netstal/common @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal HH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd HUB405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd JSE_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse KAREF_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst katmai_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc # Kilauea & Haleakala images are identical (recognized via PVR) kilauea_config \ haleakala_config: unconfig @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc kilauea_nand_config \ haleakala_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/kilauea @mkdir -p $(obj)nand_spl/board/amcc/kilauea @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk korat_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat luan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc lwmon5_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 makalu_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc mcu25_config: unconfig @mkdir -p $(obj)board/netstal/common @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal METROBOX_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst MIP405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl MIP405T_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MIP405T" >$(obj)include/config.h @$(XECHO) "Enable subset config for MIP405T" @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl ML2_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 ml300_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx ocotea_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc OCRTC_config \ ORSG_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd p3p440_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive PCI405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd pcs440ep_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep PIP405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl PLU405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd PMC405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd PMC440_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd PPChameleonEVB_config \ PPChameleonEVB_BA_25_config \ PPChameleonEVB_ME_25_config \ PPChameleonEVB_HI_25_config \ PPChameleonEVB_BA_33_config \ PPChameleonEVB_ME_33_config \ PPChameleonEVB_HI_33_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring EVB_BA,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ $(XECHO) "... BASIC model" ; \ } @[ -z "$(findstring EVB_ME,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ $(XECHO) "... MEDIUM model" ; \ } @[ -z "$(findstring EVB_HI,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ $(XECHO) "... HIGH-END model" ; \ } @[ -z "$(findstring _25,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ $(XECHO) "SysClk = 25MHz" ; \ } @[ -z "$(findstring _33,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ $(XECHO) "SysClk = 33MHz" ; \ } @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave quad100hd_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd sbc405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 sequoia_config \ rainier_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc sequoia_nand_config \ rainier_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/sequoia @mkdir -p $(obj)nand_spl/board/amcc/sequoia @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk sc3_config:unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 taihu_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc taishan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc VOH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd VOM405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd CMS700_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd W7OLMC_config \ W7OLMG_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o # Walnut & Sycamore images are identical (recognized via PVR) walnut_config \ sycamore_config: unconfig @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc WUH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd XPEDITE1K_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k yosemite_config \ yellowstone_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc yucca_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc zeus_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus ######################################################################### ## MPC8220 Systems ######################################################################### Alaska8220_config \ Yukon8220_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska sorcery_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery ######################################################################### ## MPC824x Systems ######################################################################### xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) A3000_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 barco_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x barco BMW_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw CPC45_config \ CPC45_ROMBOOT_config: unconfig @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 @cd $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ $(XECHO) "... booting from 8-bit flash" ; \ else \ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ $(XECHO) "... booting from 64-bit flash" ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> config.mk; CU824_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 debris_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin eXalion_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion HIDDEN_DRAGON_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon kvme080_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as # time permits. #linkstation_HDLAN_config \ # Remove this line when HDLAN is fixed linkstation_HGLAN_config: unconfig @mkdir -p $(obj)include @case $@ in \ *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ esac @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation MOUSSE_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse MUSENKI_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki MVBLUE_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue OXC_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc PN62_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 Sandpoint8240_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint Sandpoint8245_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint sbc8240_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 SL8245_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 utx8245_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 ######################################################################### ## MPC8260 Systems ######################################################################### atc_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc cogent_mpc8260_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent CPU86_config \ CPU86_ROMBOOT_config: unconfig @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 @cd $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ $(XECHO) "... booting from 8-bit flash" ; \ else \ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ $(XECHO) "... booting from 64-bit flash" ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> config.mk; CPU87_config \ CPU87_ROMBOOT_config: unconfig @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 @cd $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ $(XECHO) "... booting from 8-bit flash" ; \ else \ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ $(XECHO) "... booting from 64-bit flash" ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> config.mk; ep8248_config \ ep8248E_config : unconfig @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 ep8260_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 ep82xxm_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm gw8260_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 hymod_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod IDS8247_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 IPHASE4539_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 ISPAN_config \ ISPAN_REVB_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _REVB_,$@)" ] ; then \ echo "#define CFG_REV_B" > $(obj)include/config.h ; \ fi @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan mgcoge_config : unconfig @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge MPC8260ADS_config \ MPC8260ADS_lowboot_config \ MPC8260ADS_33MHz_config \ MPC8260ADS_33MHz_lowboot_config \ MPC8260ADS_40MHz_config \ MPC8260ADS_40MHz_lowboot_config \ MPC8272ADS_config \ MPC8272ADS_lowboot_config \ PQ2FADS_config \ PQ2FADS_lowboot_config \ PQ2FADS-VR_config \ PQ2FADS-VR_lowboot_config \ PQ2FADS-ZU_config \ PQ2FADS-ZU_lowboot_config \ PQ2FADS-ZU_66MHz_config \ PQ2FADS-ZU_66MHz_lowboot_config \ : unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/freescale/mpc8260ads $(if $(findstring PQ2FADS,$@), \ @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \ @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) $(if $(findstring MHz,$@), \ @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ $(if $(findstring VR,$@), \ @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) @[ -z "$(findstring lowboot_,$@)" ] || \ { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ $(XECHO) "... with lowboot configuration" ; \ } @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale MPC8266ADS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash PM825_config \ PM825_ROMBOOT_config \ PM825_BIGFLASH_config \ PM825_ROMBOOT_BIGFLASH_config \ PM826_config \ PM826_ROMBOOT_config \ PM826_BIGFLASH_config \ PM826_ROMBOOT_BIGFLASH_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/pm826 @if [ "$(findstring PM825_,$@)" ] ; then \ echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ else \ >$(obj)include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ $(XECHO) "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ $(XECHO) "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ fi; \ else \ $(XECHO) "... booting from 64-bit flash" ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ $(XECHO) "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ else \ echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ fi; \ fi @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 PM828_config \ PM828_PCI_config \ PM828_ROMBOOT_config \ PM828_ROMBOOT_PCI_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/pm826 @if [ "$(findstring _PCI_,$@)" ] ; then \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ $(XECHO) "... with PCI enabled" ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ $(XECHO) "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ fi @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 ppmc8260_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 Rattler8248_config \ Rattler_config: unconfig @mkdir -p $(obj)include $(if $(findstring 8248,$@), \ @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) @$(MKCONFIG) -a Rattler ppc mpc8260 rattler RPXsuper_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper rsdproto_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto sacsng_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng sbc8260_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 SCM_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens TQM8255_AA_config \ TQM8260_AA_config \ TQM8260_AB_config \ TQM8260_AC_config \ TQM8260_AD_config \ TQM8260_AE_config \ TQM8260_AF_config \ TQM8260_AG_config \ TQM8260_AH_config \ TQM8260_AI_config \ TQM8265_AA_config: unconfig @mkdir -p $(obj)include @case "$@" in \ TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ esac; \ if [ "$${CTYPE}" != "MPC8260" ] ; then \ echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ fi; \ echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ echo "... with $${CFREQ}MHz system clock" ; \ if [ "$${CACHE}" = "yes" ] ; then \ echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ $(XECHO) "... with L2 Cache support" ; \ else \ echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ $(XECHO) "... without L2 Cache support" ; \ fi; \ if [ "$${BMODE}" = "60x" ] ; then \ echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ $(XECHO) "... with 60x Bus Mode" ; \ else \ echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ $(XECHO) "... without 60x Bus Mode" ; \ fi @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc TQM8272_config: unconfig @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc VoVPN-GW_66MHz_config \ VoVPN-GW_100MHz_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk ZPC1900_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 ######################################################################### ## Coldfire ######################################################################### M52277EVB_config: unconfig @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale M5235EVB_config \ M5235EVB_Flash16_config \ M5235EVB_Flash32_config: unconfig @case "$@" in \ M5235EVB_config) FLASH=16;; \ M5235EVB_Flash16_config) FLASH=16;; \ M5235EVB_Flash32_config) FLASH=32;; \ esac; \ if [ "$${FLASH}" != "16" ] ; then \ echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ else \ echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ fi @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale M5253EVBE_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale cobra5272_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 EB+MCF-EV123_config : unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EB+MCF-EV123_internal_config : unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS idmr_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr M5271EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb M5272C3_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 M5275EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale M5282EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb TASREG_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd M5329AFEE_config \ M5329BFEE_config : unconfig @case "$@" in \ M5329AFEE_config) NAND=0;; \ M5329BFEE_config) NAND=16;; \ esac; \ if [ "$${NAND}" != "0" ] ; then \ echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale M5373EVB_config : unconfig @case "$@" in \ M5373EVB_config) NAND=16;; \ esac; \ if [ "$${NAND}" != "0" ] ; then \ echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale M54455EVB_config \ M54455EVB_atmel_config \ M54455EVB_intel_config \ M54455EVB_a33_config \ M54455EVB_a66_config \ M54455EVB_i33_config \ M54455EVB_i66_config : unconfig @case "$@" in \ M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ esac; \ if [ "$${FLASH}" = "INTEL" ] ; then \ echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ $(XECHO) "... with INTEL boot..." ; \ else \ echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ $(XECHO) "... with ATMEL boot..." ; \ fi; \ echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ $(XECHO) "... with $${FREQ}Hz input clock" @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale M5475AFE_config \ M5475BFE_config \ M5475CFE_config \ M5475DFE_config \ M5475EFE_config \ M5475FFE_config \ M5475GFE_config : unconfig @case "$@" in \ M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ esac; \ echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \ echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ if [ "$${RAM1}" != "0" ] ; then \ echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ fi; \ if [ "$${CODE}" != "0" ] ; then \ echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ fi; \ if [ "$${VID}" == "1" ] ; then \ echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \ fi; \ if [ "$${USB}" == "1" ] ; then \ echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale M5485AFE_config \ M5485BFE_config \ M5485CFE_config \ M5485DFE_config \ M5485EFE_config \ M5485FFE_config \ M5485GFE_config \ M5485HFE_config : unconfig @case "$@" in \ M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ esac; \ echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \ echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ if [ "$${RAM1}" != "0" ] ; then \ echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ fi; \ if [ "$${CODE}" != "0" ] ; then \ echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ fi; \ if [ "$${VID}" == "1" ] ; then \ echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \ fi; \ if [ "$${USB}" == "1" ] ; then \ echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale ######################################################################### ## MPC83xx Systems ######################################################################### MPC8313ERDB_33_config \ MPC8313ERDB_66_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _33_,$@)" ] ; then \ $(XECHO) -n "...33M ..." ; \ echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ $(XECHO) -n "...66M..." ; \ echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale MPC8315ERDB_config: unconfig @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale MPC8323ERDB_config: unconfig @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \ MPC832XEMDS_HOST_66_config \ MPC832XEMDS_SLAVE_config \ MPC832XEMDS_ATM_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ $(XECHO) "...PCI SLAVE 66M" ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ $(XECHO) -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ $(XECHO) -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _ATM_,$@)" ] ; then \ $(XECHO) -n "...ATM..." ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \ MPC8349ITXGP_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/freescale/mpc8349itx @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h @if [ "$(findstring GP,$@)" ] ; then \ echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ fi @if [ "$(findstring LOWBOOT,$@)" ] ; then \ echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ fi @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale MPC8360EMDS_config \ MPC8360EMDS_HOST_33_config \ MPC8360EMDS_HOST_66_config \ MPC8360EMDS_SLAVE_config \ MPC8360EMDS_ATM_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ $(XECHO) "...PCI SLAVE 66M" ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ $(XECHO) -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ $(XECHO) -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _ATM_,$@)" ] ; then \ $(XECHO) -n "...ATM..." ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale MPC8360ERDK_33_config \ MPC8360ERDK_66_config \ MPC8360ERDK_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _33_,$@)" ] ; then \ $(XECHO) -n "... CLKIN 33MHz " ; \ echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ fi ; @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale MPC837XEMDS_config \ MPC837XEMDS_HOST_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale MPC837XERDB_config: unconfig @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 TQM834x_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc ######################################################################### ## MPC85xx Systems ######################################################################### ATUM8548_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548 MPC8540ADS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale MPC8540EVAL_config \ MPC8540EVAL_33_config \ MPC8540EVAL_66_config \ MPC8540EVAL_33_slave_config \ MPC8540EVAL_66_slave_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _33_,$@)" ] ; then \ $(XECHO) "... 33 MHz PCI" ; \ else \ echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ $(XECHO) "... 66 MHz PCI" ; \ fi ; \ if [ "$(findstring _slave_,$@)" ] ; then \ echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ $(XECHO) " slave" ; \ else \ $(XECHO) " host" ; \ fi @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval MPC8560ADS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale MPC8541CDS_legacy_config \ MPC8541CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ $(XECHO) "... legacy" ; \ fi @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale MPC8544DS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale MPC8548CDS_legacy_config \ MPC8548CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ $(XECHO) "... legacy" ; \ fi @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale MPC8555CDS_legacy_config \ MPC8555CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ $(XECHO) "... legacy" ; \ fi @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale MPC8568MDS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale PM854_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 PM856_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _66_,$@)" ] ; then \ echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ $(XECHO) "... 66 MHz PCI" ; \ else \ $(XECHO) "... 33 MHz PCI" ; \ fi @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 sbc8548_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _66_,$@)" ] ; then \ echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ $(XECHO) "... 66 MHz PCI" ; \ else \ $(XECHO) "... 33 MHz PCI" ; \ fi @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 socrates_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates stxgp3_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stxssa_config \ stxssa_4M_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _4M_,$@)" ] ; then \ echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ $(XECHO) "... with 4 MiB flash memory" ; \ fi @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa TQM8540_config \ TQM8541_config \ TQM8555_config \ TQM8560_config: unconfig @mkdir -p $(obj)include @CTYPE=$(subst TQM,,$(@:_config=)); \ $(XECHO) "... TQM"$${CTYPE}; \ echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc ######################################################################### ## MPC86xx Systems ######################################################################### MPC8610HPCD_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale MPC8641HPCN_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale sbc8641d_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d ######################################################################### ## 74xx/7xx Systems ######################################################################### AmigaOneG3SE_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI BAB7xx_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec CPCI750_config: unconfig @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd DB64360_config: unconfig @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell DB64460_config: unconfig @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell ELPPC_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec EVB64260_config \ EVB64260_750CX_config: unconfig @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 mpc7448hpc2_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale P3G4_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 p3m750_config \ p3m7448_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring 750_,$@)" ] ; then \ echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ else \ echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ fi @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive PCIPPC2_config \ PCIPPC6_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 ZUMA_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 ppmc7xx_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx #======================================================================== # ARM #======================================================================== ######################################################################### ## StrongARM Systems ######################################################################### assabet_config : unconfig @$(MKCONFIG) $(@:_config=) arm sa1100 assabet dnp1110_config : unconfig @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 gcplus_config : unconfig @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus lart_config : unconfig @$(MKCONFIG) $(@:_config=) arm sa1100 lart shannon_config : unconfig @$(MKCONFIG) $(@:_config=) arm sa1100 shannon ######################################################################### ## ARM92xT Systems ######################################################################### ######################################################################### ## Atmel AT91RM9200 Systems ######################################################################### at91rm9200dk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 at91sam9261ek_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91sam9 at91sam9263ek_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91sam9 at91sam9rlek_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91sam9 cmc_pu2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 csb637_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 kb9202_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 mp2usb_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 m501sk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 ######################################################################### ## Atmel ARM926EJ-S Systems ######################################################################### at91cap9adk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9 at91sam9260ek_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9 ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. integratorap_config \ ap_config \ ap966_config \ ap922_config \ ap922_XA10_config \ ap7_config \ ap720t_config \ ap920t_config \ ap926ejs_config \ ap946es_config: unconfig @board/integratorap/split_by_variant.sh $@ integratorcp_config \ cp_config \ cp920t_config \ cp926ejs_config \ cp946es_config \ cp1136_config \ cp966_config \ cp922_config \ cp922_XA10_config \ cp1026_config: unconfig @board/integratorcp/split_by_variant.sh $@ lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x mx1ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx mx1fs2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx netstar_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t netstar omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn omap5912osk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap davinci_dvevm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci davinci_schmoogie_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci davinci_sonata_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) omap1610inn_config \ omap1610inn_cs0boot_config \ omap1610inn_cs3boot_config \ omap1610inn_cs_autoboot_config \ omap1610h2_config \ omap1610h2_cs0boot_config \ omap1610h2_cs3boot_config \ omap1610h2_cs_autoboot_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ $(XECHO) "... configured for CS0 boot"; \ elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ $(XECHO) "... configured for CS_AUTO boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ $(XECHO) "... configured for CS3 boot"; \ fi; @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) omap730p2_config \ omap730p2_cs0boot_config \ omap730p2_cs3boot_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ $(XECHO) "... configured for CS0 boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ $(XECHO) "... configured for CS3 boot"; \ fi; @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap sbc2410x_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 scb9328_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx smdk2400_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 smdk2410_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 SX1_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) trab_config \ trab_bigram_config \ trab_bigflash_config \ trab_old_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/trab @[ -z "$(findstring _bigram,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ } @[ -z "$(findstring _bigflash,$@)" ] || \ { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } @[ -z "$(findstring _old,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 VCMA9_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 #======================================================================== # ARM supplied Versatile development boards #======================================================================== versatile_config \ versatileab_config \ versatilepb_config : unconfig @board/versatile/split_by_variant.sh $@ voiceblue_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue cm4008_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 cm41xx_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 ######################################################################### ## S3C44B0 Systems ######################################################################### B2_config : unconfig @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave ######################################################################### ## ARM720T Systems ######################################################################### armadillo_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm720t armadillo ep7312_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 impa7_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t impa7 modnet50_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 evb4510_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 lpc2292sodimm_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 SMN42_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 ######################################################################### ## XScale Systems ######################################################################### actux1_config : unconfig @$(MKCONFIG) $(@:_config=) arm ixp actux1 actux2_config : unconfig @$(MKCONFIG) $(@:_config=) arm ixp actux2 actux3_config : unconfig @$(MKCONFIG) $(@:_config=) arm ixp actux3 actux4_config : unconfig @$(MKCONFIG) $(@:_config=) arm ixp actux4 adsvix_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa adsvix cerf250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa cerf250 cradle_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa cradle csb226_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa csb226 delta_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa delta innokom_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa innokom ixdp425_config : unconfig @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 ixdpg425_config : unconfig @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 lubbock_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa lubbock pleb2_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa pleb2 logodl_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa logodl pdnb3_config \ scpu_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring scpu_,$@)" ] ; then \ echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ $(XECHO) "... on SCPU board variant" ; \ fi @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp trizepsiv_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv wepep250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa wepep250 xaeniax_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa xaeniax xm250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa xm250 xsengine_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa xsengine zylonite_config : @$(MKCONFIG) $(@:_config=) arm pxa zylonite ######################################################################### ## ARM1136 Systems ######################################################################### omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx apollon_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk imx31_litekit_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 imx31_phycore_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 mx31ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 #======================================================================== # i386 #======================================================================== ######################################################################### ## AMD SC520 CDP ######################################################################### sc520_cdp_config : unconfig @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp sc520_spunk_config : unconfig @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk sc520_spunk_rel_config : unconfig @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk #======================================================================== # MIPS #======================================================================== ######################################################################### ## MIPS32 4Kc ######################################################################### xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \ incaip_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ $(XECHO) "... with 100MHz system clock" ; \ } @[ -z "$(findstring _133MHz,$@)" ] || \ { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ $(XECHO) "... with 133MHz system clock" ; \ } @[ -z "$(findstring _150MHz,$@)" ] || \ { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ $(XECHO) "... with 150MHz system clock" ; \ } @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip tb0229_config: unconfig @$(MKCONFIG) $(@:_config=) mips mips tb0229 ######################################################################### ## MIPS32 AU1X00 ######################################################################### dbau1000_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1100_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1500_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1550_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1550_el_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 pb1000_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h @$(MKCONFIG) -a pb1x00 mips mips pb1x00 gth2_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h @$(MKCONFIG) -a gth2 mips mips gth2 qemu_mips_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h @$(MKCONFIG) -a qemu-mips mips mips qemu-mips ######################################################################### ## MIPS64 5Kc ######################################################################### purple_config : unconfig @$(MKCONFIG) $(@:_config=) mips mips purple #======================================================================== # Nios #======================================================================== ######################################################################### ## Nios32 ######################################################################### DK1C20_safe_32_config \ DK1C20_standard_32_config \ DK1C20_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _safe_32,$@)" ] || \ { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ $(XECHO) "... NIOS 'safe_32' configuration" ; \ } @[ -z "$(findstring _standard_32,$@)" ] || \ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ $(XECHO) "... NIOS 'standard_32' configuration" ; \ } @[ -z "$(findstring DK1C20_config,$@)" ] || \ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ } @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera DK1S10_safe_32_config \ DK1S10_standard_32_config \ DK1S10_mtx_ldk_20_config \ DK1S10_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _safe_32,$@)" ] || \ { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ $(XECHO) "... NIOS 'safe_32' configuration" ; \ } @[ -z "$(findstring _standard_32,$@)" ] || \ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ $(XECHO) "... NIOS 'standard_32' configuration" ; \ } @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ } @[ -z "$(findstring DK1S10_config,$@)" ] || \ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ } @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera ADNPESC1_DNPEVA2_base_32_config \ ADNPESC1_base_32_config \ ADNPESC1_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _DNPEVA2,$@)" ] || \ { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ $(XECHO) "... DNP/EVA2 configuration" ; \ } @[ -z "$(findstring _base_32,$@)" ] || \ { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ $(XECHO) "... NIOS 'base_32' configuration" ; \ } @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ } @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv ######################################################################### ## Nios-II ######################################################################### EP1C20_config : unconfig @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera EP1S10_config : unconfig @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera EP1S40_config : unconfig @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera PK1C20_config : unconfig @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent PCI5441_config : unconfig @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent #======================================================================== # MicroBlaze #======================================================================== ######################################################################### ## Microblaze ######################################################################### suzaku_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno ml401_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ML401 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx xupv2p_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx #======================================================================== # Blackfin #======================================================================== # Analog Devices boards BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit $(BFIN_BOARDS:%=%_config) : unconfig @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) $(BFIN_BOARDS): $(MAKE) $@_config $(MAKE) #======================================================================== # AVR32 #======================================================================== ######################################################################### ## AT32AP70xx ######################################################################### atstk1002_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x atstk1003_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x atstk1004_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x atstk1006_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x atngw100_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x ######################################################################### ######################################################################### ######################################################################### ######################################################################### ## sh3 (Renesas SuperH) ######################################################################### mpr2_config: unconfig @ >include/config.h @echo "#define CONFIG_MPR2 1" >> include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 ms7720se_config: unconfig @echo "#define CONFIG_MS7720SE 1" > include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se ######################################################################### ## sh4 (Renesas SuperH) ######################################################################### ms7750se_config: unconfig @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se ms7722se_config : unconfig @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se MigoR_config : unconfig @ >include/config.h @echo "#define CONFIG_MIGO_R 1" >> include/config.h @./mkconfig -a $(@:_config=) sh sh4 MigoR r7780mp_config: unconfig @ >include/config.h @echo "#define CONFIG_R7780MP 1" >> include/config.h @./mkconfig -a $(@:_config=) sh sh4 r7780mp r2dplus_config : unconfig @ >include/config.h @echo "#define CONFIG_R2DPLUS 1" >> include/config.h @./mkconfig -a $(@:_config=) sh sh4 r2dplus #======================================================================== # SPARC #======================================================================== ######################################################################### ## LEON3 ######################################################################### # Gaisler GR-XC3S-1500 board gr_xc3s_1500_config : unconfig @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system gr_cpci_ax2000_config : unconfig @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS # Development board Stratix II edition, FPGA Device EP2S60. gr_ep2s60_config: unconfig @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler # Gaisler LEON3 GRSIM simulator grsim_config : unconfig @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler ######################################################################### ## LEON2 ######################################################################### # Gaisler LEON2 GRSIM simulator grsim_leon2_config : unconfig @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler ######################################################################### ######################################################################### ######################################################################### clean: @rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \ $(obj)examples/hello_world $(obj)examples/interrupt \ $(obj)examples/mem_to_mem_idma2intr \ $(obj)examples/sched $(obj)examples/smc91111_eeprom \ $(obj)examples/test_burst $(obj)examples/timer @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ $(obj)tools/env/{fw_printenv,fw_setenv} \ $(obj)tools/envcrc \ $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ $(obj)tools/ncb $(obj)tools/ubsha1 @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ $(obj)board/{integratorap,integratorcp}/u-boot.lds \ $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \ $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} @rm -f $(obj)api_examples/demo $(VERSION_FILE) @find $(OBJTREE) -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' \ -o -name '*.o' -o -name '*.a' \) -print \ | xargs rm -f clobber: clean @find $(OBJTREE) -type f \( -name .depend \ -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ -print0 \ | xargs -0 rm -f @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ $(obj)cscope.* $(obj)*.*~ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) @rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes} @rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h} @rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h} @rm -f $(obj)cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -lname "*" -print | xargs rm -f @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -lname "*" -print | xargs rm -f ifeq ($(OBJTREE),$(SRCTREE)) mrproper \ distclean: clobber unconfig else mrproper \ distclean: clobber unconfig rm -rf $(obj)* endif backup: F=`basename $(TOPDIR)` ; cd .. ; \ gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F #########################################################################