/* * Copyright (C) 1998 Dan Malek * Copyright (C) 1999 Magnus Damm * Copyright (C) 2000,2001,2002 Wolfgang Denk * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* U-Boot - Startup Code for PowerPC based Embedded Boards * * * The processor starts at 0x00000100 and the code is executed * from flash. The code is organized to be at an other address * in memory, but as long we don't jump around before relocating. * board_init lies at a quite high address and when the cpu has * jumped there, everything is ok. * This works because the cpu gives the FLASH (CS0) the whole * address space at startup, and board_init lies as a echo of * the flash somewhere up there in the memorymap. * * board_init will change CS0 to be positioned at the correct * address and (s)dram will be positioned at address 0 */ #include #include #include #include #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include #include #include #include #include /* We don't want the MMU yet. */ #undef MSR_KERNEL /* FP, Machine Check and Recoverable Interr. */ #define MSR_KERNEL ( MSR_FP | MSR_ME | MSR_RI ) /* * Set up GOT: Global Offset Table * * Use r12 to access the GOT */ START_GOT GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(_FIXUP_TABLE_) GOT_ENTRY(_start) GOT_ENTRY(_start_of_vectors) GOT_ENTRY(_end_of_vectors) GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) #if defined(CONFIG_FADS) GOT_ENTRY(environment) #endif END_GOT /* * r3 - 1st arg to board_init(): IMMP pointer * r4 - 2nd arg to board_init(): boot flag */ .text .long 0x27051956 /* U-Boot Magic Number */ .globl version_string version_string: .ascii U_BOOT_VERSION_STRING, "\0" . = EXC_OFF_SYS_RESET .globl _start _start: /* Initialize machine status; enable machine check interrupt */ /*----------------------------------------------------------------------*/ li r3, MSR_KERNEL /* Set FP, ME, RI flags */ mtmsr r3 mtspr SRR1, r3 /* Make SRR1 match MSR */ addis r0,0,0x0000 /* lets make sure that r0 is really 0 */ mtspr HID0, r0 /* disable I and D caches */ mfspr r3, ICR /* clear Interrupt Cause Register */ mfmsr r3 /* turn off address translation */ addis r4,0,0xffff ori r4,r4,0xffcf and r3,r3,r4 mtmsr r3 isync sync /* the MMU should be off... */ in_flash: /* * Setup BATs - cannot be done in C since we don't have a stack yet */ bl setup_bats /* Enable MMU. */ mfmsr r3 ori r3, r3, (MSR_IR | MSR_DR) mtmsr r3 /* Enable and invalidate data cache. */ mfspr r3, HID0 mr r2, r3 ori r3, r3, HID0_DCE | HID0_DCI ori r2, r2, HID0_DCE sync mtspr HID0, r3 mtspr HID0, r2 sync /* Allocate Initial RAM in data cache. */ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l li r2, 128 mtctr r2 1: dcbz r0, r3 addi r3, r3, 32 bdnz 1b /* Lock way0 in data cache. */ mfspr r3, 1011 lis r2, 0xffff ori r2, r2, 0xff1f and r3, r3, r2 ori r3, r3, 0x0080 sync mtspr 1011, r3 /* * Thisk the stack pointer *somewhere* sensible. Doesnt * matter much where as we'll move it when we relocate */ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l li r0, 0 /* Make room for stack frame header and */ stwu r0, -4(r1) /* clear final stack frame so that */ stwu r0, -4(r1) /* stack backtraces terminate cleanly */ /* let the C-code set up the rest */ /* */ /* Be careful to keep code relocatable ! */ /*----------------------------------------------------------------------*/ GET_GOT /* initialize GOT access */ /* r3: IMMR */ bl cpu_init_f /* run low-level CPU init code (from Flash) */ bl board_init_f /* run 1st part of board init code (from Flash) */ /* NOTREACHED - board_init_f() does not return */ .globl _start_of_vectors _start_of_vectors: /* Machine check */ STD_EXCEPTION(EXC_OFF_MACH_CHCK, MachineCheck, MachineCheckException) /* Data Storage exception. "Never" generated on the 860. */ STD_EXCEPTION(EXC_OFF_DATA_STOR, DataStorage, UnknownException) /* Instruction Storage exception. "Never" generated on the 860. */ STD_EXCEPTION(EXC_OFF_INS_STOR, InstStorage, UnknownException) /* External Interrupt exception. */ STD_EXCEPTION(EXC_OFF_EXTERNAL, ExtInterrupt, external_interrupt) /* Alignment exception. */ . = EXC_OFF_ALIGN Alignment: EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR stw r5,_DSISR(r21) addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) /* Program check exception */ . = EXC_OFF_PROGRAM ProgramCheck: EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, MSR_KERNEL, COPY_EE) /* No FPU on MPC8xx. This exception is not supposed to happen. */ STD_EXCEPTION(EXC_OFF_FPUNAVAIL, FPUnavailable, UnknownException) /* I guess we could implement decrementer, and may have * to someday for timekeeping. */ STD_EXCEPTION(EXC_OFF_DECR, Decrementer, timer_interrupt) STD_EXCEPTION(0xa00, Trap_0a, UnknownException) STD_EXCEPTION(0xb00, Trap_0b, UnknownException) STD_EXCEPTION(0xc00, SystemCall, UnknownException) STD_EXCEPTION(EXC_OFF_TRACE, SingleStep, UnknownException) STD_EXCEPTION(EXC_OFF_FPUNASSIST, Trap_0e, UnknownException) STD_EXCEPTION(EXC_OFF_PMI, Trap_0f, UnknownException) STD_EXCEPTION(EXC_OFF_ITME, InstructionTransMiss, UnknownException) STD_EXCEPTION(EXC_OFF_DLTME, DataLoadTransMiss, UnknownException) STD_EXCEPTION(EXC_OFF_DSTME, DataStoreTransMiss, UnknownException) STD_EXCEPTION(EXC_OFF_IABE, InstructionBreakpoint, DebugException) STD_EXCEPTION(EXC_OFF_SMIE, SysManageInt, UnknownException) STD_EXCEPTION(0x1500, Reserved5, UnknownException) STD_EXCEPTION(0x1600, Reserved6, UnknownException) STD_EXCEPTION(0x1700, Reserved7, UnknownException) STD_EXCEPTION(0x1800, Reserved8, UnknownException) STD_EXCEPTION(0x1900, Reserved9, UnknownException) STD_EXCEPTION(0x1a00, ReservedA, UnknownException) STD_EXCEPTION(0x1b00, ReservedB, UnknownException) STD_EXCEPTION(0x1c00, ReservedC, UnknownException) STD_EXCEPTION(0x1d00, ReservedD, UnknownException) STD_EXCEPTION(0x1e00, ReservedE, UnknownException) STD_EXCEPTION(0x1f00, ReservedF, UnknownException) STD_EXCEPTION(EXC_OFF_RMTE, RunModeTrace, UnknownException) .globl _end_of_vectors _end_of_vectors: . = 0x3000 /* * This code finishes saving the registers to the exception frame * and jumps to the appropriate handler for the exception. * Register r21 is pointer into trap frame, r1 has new stack pointer. */ .globl transfer_to_handler transfer_to_handler: stw r22,_NIP(r21) lis r22,MSR_POW@h andc r23,r23,r22 stw r23,_MSR(r21) SAVE_GPR(7, r21) SAVE_4GPRS(8, r21) SAVE_8GPRS(12, r21) SAVE_8GPRS(24, r21) #if 0 andi. r23,r23,MSR_PR mfspr r23,SPRG3 /* if from user, fix up tss.regs */ beq 2f addi r24,r1,STACK_FRAME_OVERHEAD stw r24,PT_REGS(r23) 2: addi r2,r23,-TSS /* set r2 to current */ tovirt(r2,r2,r23) #endif mflr r23 andi. r24,r23,0x3f00 /* get vector offset */ stw r24,TRAP(r21) li r22,0 stw r22,RESULT(r21) mtspr SPRG2,r22 /* r1 is now kernel sp */ #if 0 addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */ cmplw 0,r1,r2 cmplw 1,r1,r24 crand 1,1,4 bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */ #endif lwz r24,0(r23) /* virtual address of handler */ lwz r23,4(r23) /* where to go when done */ mtspr SRR0,r24 ori r20,r20,0x30 /* enable IR, DR */ mtspr SRR1,r20 mtlr r23 SYNC rfi /* jump to handler, enable MMU */ int_return: mfmsr r28 /* Disable interrupts */ li r4,0 ori r4,r4,MSR_EE andc r28,r28,r4 SYNC /* Some chip revs need this... */ mtmsr r28 SYNC lwz r2,_CTR(r1) lwz r0,_LINK(r1) mtctr r2 mtlr r0 lwz r2,_XER(r1) lwz r0,_CCR(r1) mtspr XER,r2 mtcrf 0xFF,r0 REST_10GPRS(3, r1) REST_10GPRS(13, r1) REST_8GPRS(23, r1) REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) mtspr SRR0,r2 mtspr SRR1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) SYNC rfi /* Cache functions. */ .globl icache_enable icache_enable: mfspr r5,HID0 /* turn on the I cache. */ ori r5,r5,0x8800 /* Instruction cache only! */ addis r6,0,0xFFFF ori r6,r6,0xF7FF and r6,r5,r6 /* clear the invalidate bit */ sync mtspr HID0,r5 mtspr HID0,r6 isync sync blr .globl icache_disable icache_disable: mfspr r5,HID0 addis r6,0,0xFFFF ori r6,r6,0x7FFF and r5,r5,r6 sync mtspr HID0,r5 isync sync blr .globl icache_status icache_status: mfspr r3, HID0 srwi r3, r3, 15 /* >>15 & 1=> select bit 16 */ andi. r3, r3, 1 blr .globl dcache_enable dcache_enable: mfspr r5,HID0 /* turn on the D cache. */ ori r5,r5,0x4400 /* Data cache only! */ mfspr r4, PVR /* read PVR */ srawi r3, r4, 16 /* shift off the least 16 bits */ cmpi 0, 0, r3, 0xC /* Check for Max pvr */ bne NotMax ori r5,r5,0x0040 /* setting the DCFA bit, for Max rev 1 errata */ NotMax: addis r6,0,0xFFFF ori r6,r6,0xFBFF and r6,r5,r6 /* clear the invalidate bit */ sync mtspr HID0,r5 mtspr HID0,r6 isync sync blr .globl dcache_disable dcache_disable: mfspr r5,HID0 addis r6,0,0xFFFF ori r6,r6,0xBFFF and r5,r5,r6 sync mtspr HID0,r5 isync sync blr .globl dcache_status dcache_status: mfspr r3, HID0 srwi r3, r3, 14 /* >>14 & 1=> select bit 17 */ andi. r3, r3, 1 blr .globl dc_read dc_read: /*TODO : who uses this, what should it do? */ blr .globl get_pvr get_pvr: mfspr r3, PVR blr /*------------------------------------------------------------------------------*/ /* * void relocate_code (addr_sp, gd, addr_moni) * * This "function" does not return, instead it continues in RAM * after relocating the monitor code. * * r3 = dest * r4 = src * r5 = length in bytes * r6 = cachelinesize */ .globl relocate_code relocate_code: mr r1, r3 /* Set new stack pointer */ mr r9, r4 /* Save copy of Global Data pointer */ mr r10, r5 /* Save copy of Destination Address */ GET_GOT mr r3, r5 /* Destination Address */ #ifdef CONFIG_SYS_RAMBOOT lis r4, CONFIG_SYS_SDRAM_BASE@h /* Source Address */ ori r4, r4, CONFIG_SYS_SDRAM_BASE@l #else lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l #endif lwz r5, GOT(__init_end) sub r5, r5, r4 li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ /* * Fix GOT pointer: * * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address * * Offset: */ sub r15, r10, r4 /* First our own GOT */ add r12, r12, r15 /* the the one used by the C code */ add r30, r30, r15 /* * Now relocate code */ cmplw cr1,r3,r4 addi r0,r5,3 srwi. r0,r0,2 beq cr1,4f /* In place copy is not necessary */ beq 7f /* Protect against 0 count */ mtctr r0 bge cr1,2f la r8,-4(r4) la r7,-4(r3) 1: lwzu r0,4(r8) stwu r0,4(r7) bdnz 1b b 4f 2: slwi r0,r0,2 add r8,r4,r0 add r7,r3,r0 3: lwzu r0,-4(r8) stwu r0,-4(r7) bdnz 3b 4: /* Unlock the data cache and invalidate locked area */ xor r0, r0, r0 mtspr 1011, r0 lis r4, CONFIG_SYS_INIT_RAM_ADDR@h ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l li r0, 128 mtctr r0 41: dcbi r0, r4 addi r4, r4, 32 bdnz 41b /* * Now flush the cache: note that we must start from a cache aligned * address. Otherwise we might miss one cache line. */ cmpwi r6,0 add r5,r3,r5 beq 7f /* Always flush prefetch queue in any case */ subi r0,r6,1 andc r3,r3,r0 mr r4,r3 5: dcbst 0,r4 add r4,r4,r6 cmplw r4,r5 blt 5b sync /* Wait for all dcbst to complete on bus */ mr r4,r3 6: icbi 0,r4 add r4,r4,r6 cmplw r4,r5 blt 6b 7: sync /* Wait for all icbi to complete on bus */ isync /* * We are done. Do not return, instead branch to second part of board * initialization, now running from RAM. */ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET mtlr r0 blr in_ram: /* * Relocation Function, r12 point to got2+0x8000 * * Adjust got2 pointers, no need to check for 0, this code * already puts a few entries in the table. */ li r0,__got2_entries@sectoff@l la r3,GOT(_GOT2_TABLE_) lwz r11,GOT(_GOT2_TABLE_) mtctr r0 sub r11,r3,r11 addi r3,r3,-4 1: lwzu r0,4(r3) cmpwi r0,0 beq- 2f add r0,r0,r11 stw r0,0(r3) 2: bdnz 1b /* * Now adjust the fixups and the pointers to the fixups * in case we need to move ourselves again. */ li r0,__fixup_entries@sectoff@l lwz r3,GOT(_FIXUP_TABLE_) cmpwi r0,0 mtctr r0 addi r3,r3,-4 beq 4f 3: lwzu r4,4(r3) lwzux r0,r4,r11 cmpwi r0,0 add r0,r0,r11 stw r4,0(r3) beq- 5f stw r0,0(r4) 5: bdnz 3b 4: clear_bss: /* * Now clear BSS segment */ lwz r3,GOT(__bss_start) lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 6f li r0, 0 5: stw r0, 0(r3) addi r3, r3, 4 cmplw 0, r3, r4 blt 5b 6: mr r3, r9 /* Global Data pointer */ mr r4, r10 /* Destination Address */ bl board_init_r /* * Copy exception vector code to low memory * * r3: dest_addr * r7: source address, r8: end address, r9: target address */ .globl trap_init trap_init: mflr r4 /* save link register */ GET_GOT lwz r7, GOT(_start) lwz r8, GOT(_end_of_vectors) li r9, 0x100 /* reset vector always at 0x100 */ cmplw 0, r7, r8 bgelr /* return if r7>=r8 - just in case */ 1: lwz r0, 0(r7) stw r0, 0(r9) addi r7, r7, 4 addi r9, r9, 4 cmplw 0, r7, r8 bne 1b /* * relocate `hdlr' and `int_return' entries */ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET li r8, Alignment - _start + EXC_OFF_SYS_RESET 2: bl trap_reloc addi r7, r7, 0x100 /* next exception vector */ cmplw 0, r7, r8 blt 2b li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET bl trap_reloc li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET bl trap_reloc li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET li r8, SystemCall - _start + EXC_OFF_SYS_RESET 3: bl trap_reloc addi r7, r7, 0x100 /* next exception vector */ cmplw 0, r7, r8 blt 3b li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET 4: bl trap_reloc addi r7, r7, 0x100 /* next exception vector */ cmplw 0, r7, r8 blt 4b mtlr r4 /* restore link register */ blr /* Setup the BAT registers. */ setup_bats: lis r4, CONFIG_SYS_IBAT0L@h ori r4, r4, CONFIG_SYS_IBAT0L@l lis r3, CONFIG_SYS_IBAT0U@h ori r3, r3, CONFIG_SYS_IBAT0U@l mtspr IBAT0L, r4 mtspr IBAT0U, r3 isync lis r4, CONFIG_SYS_DBAT0L@h ori r4, r4, CONFIG_SYS_DBAT0L@l lis r3, CONFIG_SYS_DBAT0U@h ori r3, r3, CONFIG_SYS_DBAT0U@l mtspr DBAT0L, r4 mtspr DBAT0U, r3 isync lis r4, CONFIG_SYS_IBAT1L@h ori r4, r4, CONFIG_SYS_IBAT1L@l lis r3, CONFIG_SYS_IBAT1U@h ori r3, r3, CONFIG_SYS_IBAT1U@l mtspr IBAT1L, r4 mtspr IBAT1U, r3 isync lis r4, CONFIG_SYS_DBAT1L@h ori r4, r4, CONFIG_SYS_DBAT1L@l lis r3, CONFIG_SYS_DBAT1U@h ori r3, r3, CONFIG_SYS_DBAT1U@l mtspr DBAT1L, r4 mtspr DBAT1U, r3 isync lis r4, CONFIG_SYS_IBAT2L@h ori r4, r4, CONFIG_SYS_IBAT2L@l lis r3, CONFIG_SYS_IBAT2U@h ori r3, r3, CONFIG_SYS_IBAT2U@l mtspr IBAT2L, r4 mtspr IBAT2U, r3 isync lis r4, CONFIG_SYS_DBAT2L@h ori r4, r4, CONFIG_SYS_DBAT2L@l lis r3, CONFIG_SYS_DBAT2U@h ori r3, r3, CONFIG_SYS_DBAT2U@l mtspr DBAT2L, r4 mtspr DBAT2U, r3 isync lis r4, CONFIG_SYS_IBAT3L@h ori r4, r4, CONFIG_SYS_IBAT3L@l lis r3, CONFIG_SYS_IBAT3U@h ori r3, r3, CONFIG_SYS_IBAT3U@l mtspr IBAT3L, r4 mtspr IBAT3U, r3 isync lis r4, CONFIG_SYS_DBAT3L@h ori r4, r4, CONFIG_SYS_DBAT3L@l lis r3, CONFIG_SYS_DBAT3U@h ori r3, r3, CONFIG_SYS_DBAT3U@l mtspr DBAT3L, r4 mtspr DBAT3U, r3 isync /* Invalidate TLBs. * -> for (val = 0; val < 0x20000; val+=0x1000) * -> tlbie(val); */ lis r3, 0 lis r5, 2 1: tlbie r3 addi r3, r3, 0x1000 cmp 0, 0, r3, r5 blt 1b blr