Merge samsung, imx, tegra into u-boot-arm/master

[karo-tx-uboot.git] / Makefile

diff --git a/Makefile b/Makefile
index 19ac8f5b8add59b2a08ffadc7f7f2429b63504d7..a7b6cd1cbad361ecfa6f71faff567ebae86c449d 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
 VERSION = 2013
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -316,6 +316,7 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
 endif
 LIBS-y += drivers/rtc/librtc.o
 LIBS-y += drivers/serial/libserial.o
+LIBS-y += drivers/sound/libsound.o
 LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
 LIBS-y += drivers/twserial/libtws.o
 LIBS-y += drivers/usb/eth/libusb_eth.o
@@ -390,12 +391,12 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 BOARD_SIZE_CHECK = \
        @actual=`wc -c $@ | awk '{print $$1}'`; \
-       limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+       limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
        if test $$actual -gt $$limit; then \
-               echo "$@ exceeds file size limit:"; \
-               echo "  limit:  $$limit bytes"; \
-               echo "  actual: $$actual bytes"; \
-               echo "  excess: $$((actual - limit)) bytes"; \
+               echo "$@ exceeds file size limit:" >&2 ; \
+               echo "  limit:  $$limit bytes" >&2 ; \
+               echo "  actual: $$actual bytes" >&2 ; \
+               echo "  excess: $$((actual - limit)) bytes" >&2; \
                exit 1; \
        fi
 else
@@ -450,9 +451,18 @@ $(obj)u-boot.ldr.hex:      $(obj)u-boot.ldr
 $(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
                $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
 $(obj)u-boot.img:      $(obj)u-boot.bin
                $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-               -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+               -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+               -e $(CONFIG_SYS_UBOOT_START) \
                -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
                        sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
                -d $< $@
@@ -501,7 +511,7 @@ $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
 
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-               elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+               elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
                        -o $(obj)u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
@@ -535,6 +545,9 @@ $(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtb
                rm $(obj)spl/u-boot-spl-pad.bin
 endif
 
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+               cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
                cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -857,6 +870,7 @@ clobber:    tidy
        @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
        @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
        @rm -f $(obj)MLO
+       @rm -f $(obj)SPL
        @rm -f $(obj)tools/xway-swap-bytes
        @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
        @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c