# MA 02111-1307 USA
#
-VERSION = 2012
-PATCHLEVEL = 07
+VERSION = 2013
+PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc2
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
endif
endif
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of re-compiled files.
+#
+# See the linux kernel file "Documentation/sparse.txt" for more details,
+# including where to get the "sparse" utility.
+
+ifdef C
+ifeq ("$(origin C)", "command line")
+CHECKSRC := $(C)
+endif
+endif
+ifndef CHECKSRC
+ CHECKSRC = 0
+endif
+export CHECKSRC
+
ifneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)
OBJS = $(CPUDIR)/start.o
ifeq ($(CPU),x86)
-OBJS += $(CPUDIR)/start16.o
-OBJS += $(CPUDIR)/resetvec.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += $(CPUDIR)/resetvec.o
OBJS += $(CPUDIR)/resetvec.o
endif
-OBJS := $(addprefix $(obj),$(OBJS))
+OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-))
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o
endif
ifeq ($(CPU),ixp)
-LIBS-y += arch/arm/cpu/ixp/npe/libnpe.o
+LIBS-y += drivers/net/npe/libnpe.o
endif
LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
-LIBS-y += fs/cramfs/libcramfs.o \
+LIBS-y += fs/libfs.o \
+ fs/cbfs/libcbfs.o \
+ fs/cramfs/libcramfs.o \
fs/ext4/libext4fs.o \
fs/fat/libfat.o \
fs/fdos/libfdos.o \
LIBS-y += drivers/net/phy/libphy.o
LIBS-y += drivers/pci/libpci.o
LIBS-y += drivers/pcmcia/libpcmcia.o
-LIBS-y += drivers/power/libpower.o
+LIBS-y += drivers/power/libpower.o \
+ drivers/power/fuel_gauge/libfuel_gauge.o \
+ drivers/power/pmic/libpmic.o \
+ drivers/power/battery/libbattery.o
LIBS-y += drivers/spi/libspi.o
LIBS-y += drivers/dfu/libdfu.o
ifeq ($(CPU),mpc83xx)
endif
LIBS-y += drivers/rtc/librtc.o
LIBS-y += drivers/serial/libserial.o
+LIBS-y += drivers/sound/libsound.o
LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
LIBS-y += drivers/twserial/libtws.o
LIBS-y += drivers/usb/eth/libusb_eth.o
LIBS-y += drivers/usb/gadget/libusb_gadget.o
LIBS-y += drivers/usb/host/libusb_host.o
LIBS-y += drivers/usb/musb/libusb_musb.o
+LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
LIBS-y += drivers/usb/phy/libusb_phy.o
LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
LIBS-y += drivers/video/libvideo.o
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
-ifeq ($(SOC),mx5)
-LIBS-y += $(CPUDIR)/imx-common/libimx-common.o
-endif
-ifeq ($(SOC),mx6)
-LIBS-y += $(CPUDIR)/imx-common/libimx-common.o
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
endif
ifeq ($(SOC),s5pc1xx)
endif
ifeq ($(SOC),tegra20)
LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
+LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
+LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
endif
LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))
ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
BOARD_SIZE_CHECK = \
@actual=`wc -c $@ | awk '{print $$1}'`; \
- limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+ limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
if test $$actual -gt $$limit; then \
- echo "$@ exceeds file size limit:"; \
- echo " limit: $$limit bytes"; \
- echo " actual: $$actual bytes"; \
- echo " excess: $$((actual - limit)) bytes"; \
+ echo "$@ exceeds file size limit:" >&2 ; \
+ echo " limit: $$limit bytes" >&2 ; \
+ echo " actual: $$actual bytes" >&2 ; \
+ echo " excess: $$((actual - limit)) bytes" >&2; \
exit 1; \
fi
else
ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
# enable combined SPL/u-boot/dtb rules for tegra
$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
$(obj)u-boot.img: $(obj)u-boot.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
- -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+ -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+ -e $(CONFIG_SYS_UBOOT_START) \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+$(obj)u-boot.pbl: $(obj)u-boot.bin
+ $(obj)tools/mkimage -n $(CONFIG_PBLRCW_CONFIG) \
+ -R $(CONFIG_PBLPBI_CONFIG) -T pblimage \
+ -d $< $@
+
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-$(obj)u-boot.ubl: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
- $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
- -e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
- rm $(obj)u-boot-ubl.bin
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
-$(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+$(obj)u-boot.ubl: $(obj)u-boot-with-spl.bin
+ $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
+ -e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
+
+$(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
$(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
-T aisimage \
-e $(CONFIG_SPL_TEXT_BASE) \
$(OBJCOPY) ${OBJCFLAGS} -I binary \
--pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \
$(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais
- cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \
+ cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \
$(obj)u-boot.ais
# Specify the target for use in elftosb call
ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
- elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+ elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
-o $(obj)u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
ifeq ($(SOC),tegra20)
ifeq ($(CONFIG_OF_SEPARATE),y)
-$(obj)u-boot-dtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@
- rm $(obj)spl/u-boot-spl-pad.bin
+nodtb=dtb
+dtbfile=$(obj)u-boot.dtb
else
-$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+nodtb=nodtb
+dtbfile=
+endif
+
+$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
rm $(obj)spl/u-boot-spl-pad.bin
endif
-endif
+
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+ cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
else
GEN_UBOOT = \
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
- sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \
+ UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
+ sed -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+ $$UNDEF_LST $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
endif
$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
-$(obj)u-boot.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates u-boot.lst,
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
+$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
echo '*** Your board is configured for THUMB mode.'; \
false; \
fi
+
+# GCC 3.x is reported to have problems generating the type of relocation
+# that U-Boot wants.
+# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
+checkgcc4:
+ @if test $(call cc-version) -lt 0400; then \
+ echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
+ false; \
+ fi
+
#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
$(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
gdbtools: gdb
+xmldocs pdfdocs psdocs htmldocs mandocs: tools/kernel-doc/docproc
+ $(MAKE) U_BOOT_VERSION=$(U_BOOT_VERSION) -C doc/DocBook/ $@
+
tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE)
$(MAKE) -C tools HOST_TOOLS_ALL=y
lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
-#========================================================================
-# ARM
-#========================================================================
-
-SX1_stdout_serial_config \
-SX1_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
- echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ SX1 arm arm925t sx1
-
#########################################################################
## ARM1176 Systems
#########################################################################
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
$(obj)tools/mk{smdk5250,}spl \
- $(obj)tools/ncb $(obj)tools/ubsha1
+ $(obj)tools/mxsboot \
+ $(obj)tools/ncb $(obj)tools/ubsha1 \
+ $(obj)tools/kernel-doc/docproc
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/voiceblue/eeprom \
$(obj)u-boot.lds \
+ $(obj)include/u-boot.lst \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)lib/asm-offsets.s
@rm -f $(obj)include/generated/asm-offsets.h
@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
- @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
- @rm -f $(ONENAND_BIN)
- @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
- @rm -f $(obj)MLO
@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
+ @$(MAKE) -s -C doc/DocBook/ cleandocs
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
-o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
@rm -f $(obj)u-boot.kwb
+ @rm -f $(obj)u-boot.pbl
@rm -f $(obj)u-boot.imx
@rm -f $(obj)u-boot.ubl
@rm -f $(obj)u-boot.ais
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)u-boot.sb
@rm -f $(obj)u-boot.spr
+ @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
+ @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
+ @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
+ @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
+ @rm -f $(obj)MLO
+ @rm -f $(obj)SPL
@rm -f $(obj)tools/xway-swap-bytes
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
projects / karo-tx-uboot.git / blobdiff