endif
LIBS += drivers/rtc/librtc.o
LIBS += drivers/serial/libserial.o
+ifeq ($(CONFIG_GENERIC_LPC_TPM),y)
+LIBS += drivers/tpm/libtpm.o
+endif
LIBS += drivers/twserial/libtws.o
LIBS += drivers/usb/eth/libusb_eth.o
LIBS += drivers/usb/gadget/libusb_gadget.o
LIBS += api/libapi.o
LIBS += post/libpost.o
-ifeq ($(SOC),am33xx)
-LIBS += $(CPUDIR)/omap-common/libomap-common.o
-endif
-ifeq ($(SOC),omap3)
+ifneq ($(CONFIG_AM335X)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
LIBS += $(CPUDIR)/omap-common/libomap-common.o
endif
-ifeq ($(SOC),omap4)
-LIBS += $(CPUDIR)/omap-common/libomap-common.o
-endif
-
ifeq ($(SOC),s5pc1xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-$(obj)u-boot.ubl: $(obj)u-boot-nand.bin
+$(obj)u-boot.ubl: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
- -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+ -e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
+ rm $(obj)u-boot-ubl.bin
+ rm $(obj)spl/u-boot-spl-pad.bin
+
+$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
+ elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd \
+ -o $(obj)u-boot.sb
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
$(obj)mmc_spl/u-boot-mmc-spl.bin: mmc_spl
-$(obj)spl/u-boot-spl.bin: depend
+$(obj)spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend
$(MAKE) -C spl all
updater:
lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
-#########################################################################
-## Coldfire
-#########################################################################
-M52277EVB_config \
-M52277EVB_spansion_config \
-M52277EVB_stmicro_config : unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)board/freescale/m52277evb
- @case "$@" in \
- M52277EVB_config) FLASH=SPANSION;; \
- M52277EVB_spansion_config) FLASH=SPANSION;; \
- M52277EVB_stmicro_config) FLASH=STMICRO;; \
- esac; \
- if [ "$${FLASH}" = "SPANSION" ] ; then \
- echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
- fi; \
- if [ "$${FLASH}" = "STMICRO" ] ; then \
- echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
- fi
- @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
-
-M5235EVB_config \
-M5235EVB_Flash16_config \
-M5235EVB_Flash32_config: unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)board/freescale/m5235evb
- @case "$@" in \
- M5235EVB_config) FLASH=16;; \
- M5235EVB_Flash16_config) FLASH=16;; \
- M5235EVB_Flash32_config) FLASH=32;; \
- esac; \
- if [ "$${FLASH}" != "16" ] ; then \
- echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
- else \
- echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
- fi
- @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
-
-EB+MCF-EV123_config : unconfig
- @mkdir -p $(obj)board/BuS/EB+MCF-EV123
- @echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
- @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-EB+MCF-EV123_internal_config : unconfig
- @mkdir -p $(obj)board/BuS/EB+MCF-EV123
- @echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
- @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-M54451EVB_config \
-M54451EVB_stmicro_config : unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)board/freescale/m54451evb
- @case "$@" in \
- M54451EVB_config) FLASH=NOR;; \
- M54451EVB_stmicro_config) FLASH=STMICRO;; \
- esac; \
- if [ "$${FLASH}" = "NOR" ] ; then \
- echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
- fi; \
- if [ "$${FLASH}" = "STMICRO" ] ; then \
- echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
- fi; \
- echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
- @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale
-
-M54455EVB_config \
-M54455EVB_atmel_config \
-M54455EVB_intel_config \
-M54455EVB_a33_config \
-M54455EVB_a66_config \
-M54455EVB_i33_config \
-M54455EVB_i66_config \
-M54455EVB_stm33_config : unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)board/freescale/m54455evb
- @case "$@" in \
- M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \
- M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \
- M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \
- M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \
- M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \
- M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \
- M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
- M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \
- esac; \
- if [ "$${FLASH}" = "INTEL" ] ; then \
- echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
- fi; \
- if [ "$${FLASH}" = "ATMEL" ] ; then \
- echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
- fi; \
- if [ "$${FLASH}" = "STMICRO" ] ; then \
- echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
- fi; \
- echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
- $(XECHO) "... with $${FREQ}Hz input clock"
- @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale
-
#========================================================================
# ARM
#========================================================================
$(obj)tools/envcrc \
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
- $(obj)tools/mkimage $(obj)tools/mpc86x_clk \
+ $(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
+ @rm -f $(obj)include/bmp_logo_data.h
@rm -f $(obj)lib/asm-offsets.s
@rm -f $(obj)include/generated/asm-offsets.h
@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
-o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
| xargs rm -f
-clobber: clean
- @find $(OBJTREE) -type f \( -name '*.depend*' \
- -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
- -print0 \
- | xargs -0 rm -f
+# Removes everything not needed for testing u-boot
+tidy: clean
+ @find $(OBJTREE) -type f \( -name '*.depend*' \) -print | xargs rm -f
+
+clobber: tidy
+ @find $(OBJTREE) -type f \( -name '*.srec' \
+ -o -name '*.bin' -o -name u-boot.img \) \
+ -print0 | xargs -0 rm -f
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
@rm -f $(obj)u-boot.imx
@rm -f $(obj)u-boot.ubl
@rm -f $(obj)u-boot.dtb
- @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
+ @rm -f $(obj)u-boot.sb
+ @rm -f $(obj)tools/inca-swap-bytes
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
+ @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@rm -fr $(obj)include/generated
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
projects / karo-tx-uboot.git / blobdiff