#
VERSION = 2010
-PATCHLEVEL = 03
+PATCHLEVEL = 06
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
-e s/sun4u/sparc64/ \
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
- -e s/powerpc/ppc/ \
- -e s/ppc64/ppc/ \
- -e s/macppc/ppc/)
+ -e s/ppc64/powerpc/ \
+ -e s/ppc/powerpc/ \
+ -e s/macppc/powerpc/\
+ -e s/sh.*/sh/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
#########################################################################
-ifeq ($(ARCH),powerpc)
-ARCH = ppc
-endif
-
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).a
endif
ifeq ($(CPU),ixp)
-LIBS += cpu/ixp/npe/libnpe.a
+LIBS += arch/arm/cpu/ixp/npe/libnpe.a
endif
LIBS += arch/$(ARCH)/lib/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
-LIBS += arch/ppc/cpu/mpc8xxx/ddr/libddr.a
-LIBS += arch/ppc/cpu/mpc8xxx/lib8xxx.a
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
ifeq ($(CPU),mpc86xx)
-LIBS += arch/ppc/cpu/mpc8xxx/ddr/libddr.a
-LIBS += arch/ppc/cpu/mpc8xxx/lib8xxx.a
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
LIBS += api/libapi.a
LIBS += post/libpost.a
+ifeq ($(SOC),omap3)
+LIBS += $(CPUDIR)/omap-common/libomap-common.a
+endif
+ifeq ($(SOC),omap4)
+LIBS += $(CPUDIR)/omap-common/libomap-common.a
+endif
+
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
$(obj)u-boot.img: $(obj)u-boot.bin
- ./tools/mkimage -A $(ARCH) -T firmware -C none \
+ $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(TEXT_BASE) -e 0 \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
$(TIMESTAMP_FILE):
- @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
- @date +'#define U_BOOT_TIME "%T"' >> $@
+ @LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
+ @LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@
gdbtools:
$(MAKE) -C tools/gdb all || exit 1
unexpand -a | sed -e 's/\s\s*$$//' > $@
include/license.h: tools/bin2header COPYING
- cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
+ cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
#########################################################################
unconfig:
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
-%: %_config
- $(MAKE)
+%_config:: unconfig
+ @$(MKCONFIG) -A $(@:_config=)
+
+##%: %_config
+## $(MAKE)
+
+#
+# Functions to generate common board directory names
+#
+lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
+ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
#========================================================================
# PowerPC
#========================================================================
-#########################################################################
-## MPC5xx Systems
-#########################################################################
-
-canmb_config: unconfig
- @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
-
-cmi_mpc5xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
-
-PATI_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
-
#########################################################################
## MPC5xxx Systems
#########################################################################
-aev_config: unconfig
- @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
-
-BC3450_config: unconfig
- @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
-
-cm5200_config: unconfig
- @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
-
-cpci5200_config: unconfig
- @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
-
digsy_mtc_config \
digsy_mtc_LOWBOOT_config \
digsy_mtc_RAMBOOT_config: unconfig
@mkdir -p $(obj)board/digsy_mtc
@ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
- echo "... with LOWBOOT configuration" ; \
- }
+ echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
@[ -z "$(findstring RAMBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
- echo "... with RAMBOOT configuration" ; \
- }
- @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc
+ echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
+ @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc
galaxy5200_LOWBOOT_config \
galaxy5200_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
-
-hmi1001_config: unconfig
- @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
+ @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200
Lite5200_config \
Lite5200_LOWBOOT_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { if [ "$(findstring DDR,$@)" ] ; \
+ if [ "$(findstring DDR,$@)" ] ; \
then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
- fi ; \
- $(XECHO) "... with LOWBOOT configuration" ; \
- }
+ fi
@[ -z "$(findstring LOWBOOT08,$@)" ] || \
- { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
- echo "... with 8 MB flash only" ; \
- $(XECHO) "... with LOWBOOT configuration" ; \
- }
+ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
@[ -z "$(findstring DDR,$@)" ] || \
- { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
- $(XECHO) "... DDR memory revision" ; \
- }
- @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
-
-jupiter_config: unconfig
- @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
-
-inka4x0_config: unconfig
- @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
-
-ipek01_config: unconfig
- @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
+ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
lite5200b_config \
lite5200b_PM_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
- @ $(XECHO) "... DDR memory revision"
@ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring _PM_,$@)" ] || \
- { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \
- $(XECHO) "... with power management (low-power mode) support" ; \
- }
+ echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
- $(XECHO) "... with LOWBOOT configuration" ; \
- }
- @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
+ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
+ @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
mcc200_config \
mcc200_SDRAM_config \
prs200_highboot_DDR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mcc200
- @[ -n "$(findstring highboot,$@)" ] || \
- { $(XECHO) "... with lowboot configuration" ; \
- }
@[ -z "$(findstring highboot,$@)" ] || \
- { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
- $(XECHO) "... with highboot configuration" ; \
- }
+ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
@[ -n "$(findstring _SDRAM,$@)" ] || \
- { if [ -n "$(findstring mcc200,$@)" ]; \
- then \
- $(XECHO) "... with DDR" ; \
- else \
- if [ -n "$(findstring _DDR,$@)" ];\
+ if [ -n "$(findstring prs200,$@)" ]; \
+ then \
+ if [ -z "$(findstring _DDR,$@)" ];\
then \
- $(XECHO) "... with DDR" ; \
- else \
echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
- $(XECHO) "... with SDRAM" ; \
fi; \
- fi; \
- }
+ fi
@[ -z "$(findstring _SDRAM,$@)" ] || \
- { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \
- $(XECHO) "... with SDRAM" ; \
- }
+ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h
@[ -z "$(findstring COM12,$@)" ] || \
- { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \
- $(XECHO) "... with console on COM12" ; \
- }
+ echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h
@[ -z "$(findstring prs200,$@)" ] || \
- { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
- }
- @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
-
-mecp5200_config: unconfig
- @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd
-
-motionpro_config: unconfig
- @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
-
-mucmc52_config: unconfig
- @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
-
-munices_config: unconfig
- @$(MKCONFIG) munices ppc mpc5xxx munices
+ echo "#define CONFIG_PRS200" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200
MVBC_P_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mvbc_p
@ >$(obj)include/config.h
@[ -z "$(findstring MVBC_P,$@)" ] || \
- { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }
- @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
+ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a $@ powerpc mpc5xxx mvbc_p matrix_vision
MVSMR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/matrix_vision/mvsmr
- @$(MKCONFIG) $(@:_config=) ppc mpc5xxx mvsmr matrix_vision
-
-o2dnt_config: unconfig
- @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
+ @$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision
pcm030_config \
pcm030_LOWBOOT_config: unconfig
@mkdir -p $(obj)include $(obj)board/phytec/pcm030
@ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
- echo "... with LOWBOOT configuration" ; \
- }
- @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
-
-pf5200_config: unconfig
- @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd
+ echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
+ @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_DDR_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring DDR,$@)" ] || \
- { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
- $(XECHO) "... DDR memory revision" ; \
- }
+ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@[ -z "$(findstring ROMBOOT,$@)" ] || \
- { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
- $(XECHO) "... booting from 8-bit flash" ; \
- }
- @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
-
-smmaco4_config: unconfig
- @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
-
-spieval_config: unconfig
- @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
+ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520
TB5200_B_config \
TB5200_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _B,$@)" ] || \
- { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
- $(XECHO) "... with MPC5200B processor" ; \
- }
- @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
@mkdir -p $(obj)include
@ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
+ @$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk
Total5200_config \
Total5200_lowboot_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/total5200
@[ -n "$(findstring Rev,$@)" ] || \
- { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
- $(XECHO) "... revision 1 board" ; \
- }
+ echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h
@[ -z "$(findstring Rev2_,$@)" ] || \
- { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
- $(XECHO) "... revision 2 board" ; \
- }
+ echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h
@[ -z "$(findstring lowboot_,$@)" ] || \
- { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
- $(XECHO) "... with lowboot configuration" ; \
- }
- @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
+ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
+ @$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200
cam5200_config \
cam5200_niosflash_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/tqc/tqm5200
@[ -z "$(findstring cam5200,$@)" ] || \
- { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
- echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
- echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
- $(XECHO) "... TQM5200S on Cam5200" ; \
+ { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring niosflash,$@)" ] || \
- { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \
- $(XECHO) "... with NIOS flash driver" ; \
- }
+ echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h
@[ -z "$(findstring fo300,$@)" ] || \
- { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \
- $(XECHO) "... TQM5200 on FO300" ; \
- }
+ echo "#define CONFIG_FO300" >>$(obj)include/config.h
@[ -z "$(findstring MiniFAP,$@)" ] || \
- { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
- $(XECHO) "... TQM5200_AC on MiniFAP" ; \
- }
+ echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h
@[ -z "$(findstring STK100,$@)" ] || \
- { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \
- $(XECHO) "... on a STK52XX.100 base board" ; \
- }
+ echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h
@[ -z "$(findstring TQM5200_B,$@)" ] || \
- { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h
@[ -z "$(findstring TQM5200S,$@)" ] || \
- { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
- echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
+ { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
- { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
- }
- @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
-
-uc101_config: unconfig
- @$(MKCONFIG) uc101 ppc mpc5xxx uc101
-
-v38b_config: unconfig
- @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
+ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
+ @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
#########################################################################
## MPC512x Systems
#########################################################################
-aria_config: unconfig
- @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
-
-mecp5123_config: unconfig
- @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
-
mpc5121ads_config \
mpc5121ads_rev2_config \
: unconfig
@if [ "$(findstring rev2,$@)" ] ; then \
echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
fi
- @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
+ @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale
#########################################################################
## MPC8xx Systems
#########################################################################
-Adder_config \
Adder87x_config \
AdderII_config \
+AdderUSB_config \
+Adder_config \
: unconfig
@mkdir -p $(obj)include
$(if $(findstring AdderII,$@), \
- @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
- @$(MKCONFIG) -a Adder ppc mpc8xx adder
-
-AdderUSB_config: unconfig
- @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
+ @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
+ @$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder
ADS860_config \
FADS823_config \
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
-
-AMX860_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
-
-c2mon_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
-
-CCM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
-
-cogent_mpc8xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
-
-ELPT860_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
-
-EP88x_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
-
-ESTEEM192E_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
-
-ETX094_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
-
-FLAGADM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
-
-xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
+ @$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads
GEN860T_SC_config \
GEN860T_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _SC,$@)" ] || \
- { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
- $(XECHO) "With reduced H/W feature set (SC)..." ; \
- }
- @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
-
-GENIETV_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
-
-GTH_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
-
-hermes_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
-
-HMI10_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
-
-IAD210_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
-
-xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
+ echo "#define CONFIG_SC" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t
ICU862_100MHz_config \
ICU862_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
- { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
- $(XECHO) "... with 100MHz system clock" ; \
- }
- @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
-
-IP860_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
+ echo "#define CONFIG_100MHz" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862
IVML24_256_config \
IVML24_128_config \
IVML24_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVML24_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h
@[ -z "$(findstring IVML24_128_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
+ echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
IVMS8_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVMS8_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h
@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
-
-kmsupx4_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
-
-KUP4K_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
-
-KUP4X_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
-
-LANTEC_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
-
-lwmon_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
+ echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm
MBX_config \
MBX860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
-
-mgsuvd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
-
-MHPC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
-
-xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
+ @$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx
NETVIA_V2_config \
NETVIA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETVIA_config,$@)" ] || \
- { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
- $(XECHO) "... Version 1" ; \
- }
+ echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h
@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
- $(XECHO) "... Version 2" ; \
- }
- @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
-
-xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
+ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a NETVIA powerpc mpc8xx netvia
NETPHONE_V2_config \
NETPHONE_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETPHONE_config,$@)" ] || \
- { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h
@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
-
-xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
+ echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a NETPHONE powerpc mpc8xx netphone
NETTA_ISDN_6412_SWAPHOOK_config \
NETTA_ISDN_SWAPHOOK_config \
NETTA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring ISDN_,$@)" ] || \
- { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h
@[ -n "$(findstring ISDN_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
- }
+ echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h
@[ -z "$(findstring 6412_,$@)" ] || \
- { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h
@[ -n "$(findstring 6412_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
- }
+ echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h
@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
- { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h
@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
-
-xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
+ echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a NETTA powerpc mpc8xx netta
NETTA2_V2_config \
NETTA2_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETTA2_config,$@)" ] || \
- { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h
@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
+ echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a NETTA2 powerpc mpc8xx netta2
NC650_Rev1_config \
NC650_Rev2_config \
CP850_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring CP850,$@)" ] || \
- { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
- echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
- }
+ { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
+ }
@[ -z "$(findstring Rev1,$@)" ] || \
- { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
- }
+ { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
+ }
@[ -z "$(findstring Rev2,$@)" ] || \
- { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
-
-NX823_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
-
-pcu_e_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
-
-QS850_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
-
-QS823_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
-
-QS860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
-
-quantum_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
-
-R360MPI_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
-
-RBC823_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
-
-RPXClassic_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
-
-RPXlite_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
+ { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
+ }
+ @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650
RPXlite_DW_64_config \
RPXlite_DW_LCD_config \
RPXlite_DW_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _64,$@)" ] || \
- { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \
- $(XECHO) "... with 64MHz system clock ..."; \
- }
+ echo "#define RPXlite_64MHz" >>$(obj)include/config.h
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
- $(XECHO) "... with LCD display ..."; \
}
@[ -z "$(findstring _NVRAM,$@)" ] || \
- { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
- $(XECHO) "... with ENV in NVRAM ..."; \
- }
- @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
-
-rmu_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
-
-RRvision_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
+ echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw
RRvision_LCD_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
- @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
-
-SM850_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
-
-spc1920_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
+ @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision
SPD823TS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
-
-stxxtc_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
-
-svm_sc8xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
+ @$(MKCONFIG) $@ powerpc mpc8xx spd8xx
SXNI855T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
-
-# EMK MPC8xx based modules
-TOP860_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
+ @$(MKCONFIG) $@ powerpc mpc8xx sixnet
# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
# and only 823 boards may have LCD support
-xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
+xtract_8xx = $(subst _LCD,,$1)
FPS850L_config \
FPS860L_config \
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
- $(XECHO) "... with LCD display" ; \
}
- @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
TTTech_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
-
-uc100_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
+ @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
v37_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
+ @$(MKCONFIG) $@ powerpc mpc8xx v37
wtk_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
#########################################################################
## PPC4xx Systems
#########################################################################
-xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
-
-acadia_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
acadia_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/acadia
@mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-ADCIOP_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
-
-alpr_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
-
-AP1000_config:unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
-
-APC405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
-
-AR405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
-
-ASH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
-
-bamboo_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
+ @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
bamboo_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/bamboo
@mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-bubinga_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
-
-CANBT_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
+ @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
# Arches, Canyonlands & Glacier use different U-Boot images
arches_config \
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
+ @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
canyonlands_nand_config \
glacier_nand_config: unconfig
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+ @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
CATcenter_config \
CATcenter_25_config \
CATcenter_33_config: unconfig
@mkdir -p $(obj)include
- @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h
- @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
+ @echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h
+ @echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
- $(XECHO) "SysClk = 25MHz" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h
@[ -z "$(findstring _33,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
- $(XECHO) "SysClk = 33MHz" ; \
- }
- @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
-
-CMS700_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
-
-CPCI2DP_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
+ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave
CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
@mkdir -p $(obj)board/esd/cpci405
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-
-CPCIISER4_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
-
-CRAYL1_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
-
-csb272_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
-
-csb472_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
-
-DASA_SIM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
-
-dlvision_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
-
-DP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
-
-DU405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
-
-DU440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
-
-ebony_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
-
-ERIC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
+ @$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd
fx12mm_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/avnet/fx12mm/config.tmp
@echo "TEXT_BASE := 0xFFCB0000" \
>> $(obj)board/avnet/fx12mm/config.tmp
- @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+ @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
fx12mm_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/avnet/fx12mm/config.tmp
@echo "TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/fx12mm/config.tmp
- @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
-
-G2000_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
-
-gdppc440etx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
-
-hcu4_config: unconfig
- @mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
-
-hcu5_config: unconfig
- @mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
-
-HH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
-
-HUB405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
+ @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
intip_config \
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
-
-JSE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
+ @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys
-KAREF_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
-
-katmai_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
+hcu4_config \
+hcu5_config \
+mcu25_config: unconfig
+ @mkdir -p $(obj)board/netstal/common
+ @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal
# Kilauea & Haleakala images are identical (recognized via PVR)
kilauea_config \
haleakala_config: unconfig
- @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+ @$(MKCONFIG) -n $@ kilauea powerpc ppc4xx kilauea amcc
kilauea_nand_config \
haleakala_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/kilauea
@mkdir -p $(obj)nand_spl/board/amcc/kilauea
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-korat_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
-
-luan_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
-
-lwmon5_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
-
-makalu_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
-
-mcu25_config: unconfig
- @mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
-
-METROBOX_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
-
-MIP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
+ @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
MIP405T_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
@$(XECHO) "Enable subset config for MIP405T"
- @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
-
-ML2_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
+ @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl
ml507_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ml507/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ml507/config.tmp
- @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+ @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
ml507_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ml507/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ml507/config.tmp
- @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
-
-neo_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
-
-ocotea_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
+ @$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx
OCRTC_config \
ORSG_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
-
-p3p440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
-
-PCI405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
-
-pcs440ep_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
-
-PIP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
-
-PLU405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
-
-PMC405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
-
-PMC405DE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
-
-PMC440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
+ @$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_HI_33_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring EVB_BA,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
- $(XECHO) "... BASIC model" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h
@[ -z "$(findstring EVB_ME,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
- $(XECHO) "... MEDIUM model" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h
@[ -z "$(findstring EVB_HI,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
- $(XECHO) "... HIGH-END model" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
- $(XECHO) "SysClk = 25MHz" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h
@[ -z "$(findstring _33,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
- $(XECHO) "SysClk = 33MHz" ; \
- }
- @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
-
-quad100hd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
-
-redwood_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
-
-sbc405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
-
-sc3_config:unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
+ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave
sequoia_config \
rainier_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
sequoia_nand_config \
rainier_nand_config: unconfig
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
sequoia_ramboot_config \
rainier_ramboot_config: unconfig
@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
$(obj)board/amcc/sequoia/config.tmp
-
-taihu_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
-
-taishan_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
v5fx30teval_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/avnet/v5fx30teval/config.tmp
@echo "TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
- @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+ @$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet
v5fx30teval_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/avnet/v5fx30teval/config.tmp
@echo "TEXT_BASE := 0xFF1C0000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
- @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
-
-VOH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
-
-VOM405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
+ @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
W7OLMC_config \
W7OLMG_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
+ @$(MKCONFIG) $@ powerpc ppc4xx w7o
# Walnut & Sycamore images are identical (recognized via PVR)
walnut_config \
sycamore_config: unconfig
- @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
-
-WUH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
+ @$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc
xilinx-ppc405-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/xilinx/ppc405-generic/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+ @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
xilinx-ppc405-generic_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/xilinx/ppc405-generic/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+ @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
xilinx-ppc440-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ppc440-generic/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+ @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
xilinx-ppc440-generic_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ppc440-generic/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
-
-XPEDITE1000_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
+ @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
yosemite_config \
yellowstone_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
-
-yucca_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
-
-zeus_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
-
-#########################################################################
-## MPC8220 Systems
-#########################################################################
-
-Alaska8220_config \
-Yukon8220_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
-
-sorcery_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
+ @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc
#########################################################################
## MPC824x Systems
#########################################################################
-xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
-A3000_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
-
-barco_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
-
-BMW_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
+eXalion_config: unconfig
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
CPC45_config \
CPC45_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
- @cd $(obj)include ; \
+ @mkdir -p $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- $(XECHO) "... booting from 8-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- $(XECHO) "... booting from 64-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk;
-
-CU824_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
-
-debris_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
-
-eXalion_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
-
-HIDDEN_DRAGON_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
-
-kvme080_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
+ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
+ @$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45
# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
# time permits.
*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
esac
- @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
-
-MOUSSE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
-
-MUSENKI_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
-
-MVBLUE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
-
-OXC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
-
-PN62_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
+ @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation
Sandpoint8240_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
+ @$(MKCONFIG) $@ powerpc mpc824x sandpoint
Sandpoint8245_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
-
-sbc8240_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
-
-utx8245_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
+ @$(MKCONFIG) $@ powerpc mpc824x sandpoint
#########################################################################
## MPC8260 Systems
#########################################################################
-atc_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
-
cogent_mpc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
- @cd $(obj)include ; \
+ @mkdir -p $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- $(XECHO) "... booting from 8-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- $(XECHO) "... booting from 64-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk;
+ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
+ @$(MKCONFIG) -n $@ CPU86 powerpc mpc8260 cpu86
CPU87_config \
CPU87_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
- @cd $(obj)include ; \
+ @mkdir -p $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- $(XECHO) "... booting from 8-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- $(XECHO) "... booting from 64-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk;
+ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
+ @$(MKCONFIG) -n $@ CPU87 powerpc mpc8260 cpu87
ep8248_config \
ep8248E_config : unconfig
- @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
-
-ep8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
-
-ep82xxm_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
-
-gw8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
-
-hymod_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
-
-IDS8247_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
-
-IPHASE4539_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
+ @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248
ISPAN_config \
ISPAN_REVB_config: unconfig
@if [ "$(findstring _REVB_,$@)" ] ; then \
echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
-
-mgcoge_config : unconfig
- @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
+ @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
$(if $(findstring VR,$@), \
@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
- $(XECHO) "... with lowboot configuration" ; \
- }
- @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
-
-MPC8266ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
+ echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
+ @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
muas3001_dev_config \
muas3001_config : unconfig
@if [ "$(findstring dev,$@)" ] ; then \
echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
+ @$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
>$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- $(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
- $(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \
else \
- $(XECHO) "... booting from 64-bit flash" ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
$(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
- @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
+ @$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826
PM828_config \
PM828_PCI_config \
@mkdir -p $(obj)board/pm826
@if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
- $(XECHO) "... with PCI enabled" ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- $(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
- @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
-
-ppmc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
+ @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828
Rattler8248_config \
Rattler_config: unconfig
@mkdir -p $(obj)include
$(if $(findstring 8248,$@), \
- @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
- @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
-
-RPXsuper_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
-
-rsdproto_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
-
-sacsng_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
-
-sbc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
-
-SCM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
+ @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
+ @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler
TQM8255_AA_config \
TQM8260_AA_config \
echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
fi; \
echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \
- echo "... with $${CFREQ}MHz system clock" ; \
if [ "$${CACHE}" = "yes" ] ; then \
echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
- $(XECHO) "... with L2 Cache support" ; \
else \
echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
- $(XECHO) "... without L2 Cache support" ; \
fi; \
if [ "$${BMODE}" = "60x" ] ; then \
echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
- $(XECHO) "... with 60x Bus Mode" ; \
else \
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
- $(XECHO) "... without 60x Bus Mode" ; \
fi
- @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
-
-TQM8272_config: unconfig
- @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
+ @$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
- @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
-
-ZPC1900_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
+ @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
#########################################################################
## Coldfire
astro_mcf5373l_config \
astro_mcf5373l_RAM_config : unconfig
- @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro
-
-M5208EVBE_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
+ @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro
M52277EVB_config \
M52277EVB_spansion_config \
echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
- $(XECHO) "... with SPANSION boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
- $(XECHO) "... with ST Micro boot..." ; \
fi
- @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
+ @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
M5235EVB_config \
M5235EVB_Flash16_config \
echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
fi
- @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
-
-M5249EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
-
-M5253DEMO_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
-
-M5253EVBE_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
+ @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
cobra5272_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
+ @$(MKCONFIG) $@ m68k mcf52x2 cobra5272
EB+MCF-EV123_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
- @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+ @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
EB+MCF-EV123_internal_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
- @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-EP2500_config: unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury
-
-idmr_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
-
-M5271EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
-
-M5272C3_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
-
-M5275EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
-
-M5282EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
-
-M53017EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
+ @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
M5329AFEE_config \
M5329BFEE_config : unconfig
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
+ @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale
M5373EVB_config : unconfig
@case "$@" in \
if [ "$${FLASH}" = "NOR" ] ; then \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
- $(XECHO) "... with NOR boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
- $(XECHO) "... with ST Micro boot..." ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
- @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
+ @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale
M54455EVB_config \
M54455EVB_atmel_config \
echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
- $(XECHO) "... with INTEL boot..." ; \
fi; \
if [ "$${FLASH}" = "ATMEL" ] ; then \
echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
- $(XECHO) "... with ATMEL boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
- $(XECHO) "... with ST Micro boot..." ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
- $(XECHO) "... with $${FREQ}Hz input clock"
- @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
+ @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale
M5475AFE_config \
M5475BFE_config \
if [ "$${USB}" == "1" ] ; then \
echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
+ @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale
M5485AFE_config \
M5485BFE_config \
if [ "$${USB}" == "1" ] ; then \
echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
-
-TASREG_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
+ @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
#########################################################################
## MPC83xx Systems
#########################################################################
-kmeter1_config: unconfig
- @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
-
MPC8313ERDB_33_config \
MPC8313ERDB_66_config \
MPC8313ERDB_NAND_33_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8313erdb
@if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "...33M ..." ; \
echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- $(XECHO) -n "...66M..." ; \
echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _NAND_,$@)" ] ; then \
- $(XECHO) -n "...NAND..." ; \
echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
@if [ "$(findstring _NAND_,$@)" ] ; then \
echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
fi ;
+ @$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
MPC8315ERDB_NAND_config \
MPC8315ERDB_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
-
-MPC8323ERDB_config: unconfig
- @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
+ @$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
- $(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
- $(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- $(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
- $(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
-
-MPC8349EMDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
+ @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
- @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
+ @$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
- $(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
- $(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- $(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
- $(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
+ @$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
MPC8360ERDK_33_config \
MPC8360ERDK_66_config \
MPC8360ERDK_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "... CLKIN 33MHz " ; \
echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
fi ;
- @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
+ @$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
MPC837XEMDS_config \
MPC837XEMDS_HOST_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
- $(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
-
-MPC837XERDB_config: unconfig
- @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
-
-MVBLM7_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
+ @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
sbc8349_config \
sbc8349_PCI_33_config \
sbc8349_PCI_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
+ @$(MKCONFIG) -n $@ -t $@ sbc8349 powerpc mpc83xx sbc8349
SIMPC8313_LP_config \
SIMPC8313_SP_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/sheldon/simpc8313
@if [ "$(findstring _LP_,$@)" ] ; then \
- $(XECHO) -n "...Large Page NAND..." ; \
echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SP_,$@)" ] ; then \
- $(XECHO) -n "...Small Page NAND..." ; \
echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-TQM834x_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
+ @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
caddy2_config \
vme8349_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
-
-edb9301_config \
-edb9302_config \
-edb9302a_config \
-edb9307_config \
-edb9307a_config \
-edb9312_config \
-edb9315_config \
-edb9315a_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx
+ @$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd
#########################################################################
## MPC85xx Systems
#########################################################################
-ATUM8548_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
-
MPC8536DS_NAND_config \
MPC8536DS_SDCARD_config \
MPC8536DS_SPIFLASH_config \
MPC8536DS_36BIT_config \
MPC8536DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
-
-MPC8540ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
+ @$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
MPC8540EVAL_66_config \
MPC8540EVAL_33_slave_config \
-MPC8540EVAL_66_slave_config: unconfig
+MPC8540EVAL_66_slave_config: unconfig
@mkdir -p $(obj)include
- @if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) "... 33 MHz PCI" ; \
- else \
+ @if [ -z "$(findstring _33_,$@)" ] ; then \
echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
- $(XECHO) "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
- $(XECHO) " slave" ; \
- else \
- $(XECHO) " host" ; \
fi
- @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
-
-MPC8560ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
+ @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
- $(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
-
-MPC8544DS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
+ @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
MPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
- $(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
+ @$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
- $(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
-
-MPC8568MDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
+ @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
MPC8569MDS_ATM_config \
MPC8569MDS_NAND_config \
MPC8569MDS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8569MDS ppc mpc85xx mpc8569mds freescale
+ @$(MKCONFIG) -n $@ -t $@ MPC8569MDS powerpc mpc85xx mpc8569mds freescale
MPC8572DS_36BIT_config \
MPC8572DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
+ @$(MKCONFIG) -n $@ -t $@ MPC8572DS powerpc mpc85xx mpc8572ds freescale
P2020DS_36BIT_config \
P2020DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
+ @$(MKCONFIG) -n $@ -t $@ P2020DS powerpc mpc85xx p2020ds freescale
P1011RDB_config \
P1011RDB_NAND_config \
P2010RDB_NAND_config \
P2010RDB_SDCARD_config \
P2010RDB_SPIFLASH_config \
+P2020DS_DDR2_config \
P2020RDB_config \
P2020RDB_NAND_config \
P2020RDB_SDCARD_config \
P2020RDB_SPIFLASH_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
-
-PM854_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
-
-PM856_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
+ @$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -n $@ -t $@ SBC8540 powerpc mpc85xx sbc8560
sbc8548_config \
sbc8548_PCI_33_config \
sbc8548_PCI_66_config \
sbc8548_PCI_33_PCIE_config \
sbc8548_PCI_66_PCIE_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
+ @$(MKCONFIG) -n $@ -t $@ sbc8548 powerpc mpc85xx sbc8548
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
-
-socrates_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
-
-stxgp3_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
+ @$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560
stxssa_config \
stxssa_4M_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _4M_,$@)" ] ; then \
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
- $(XECHO) "... with 4 MiB flash memory" ; \
fi
- @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
+ @$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx
TQM8540_config \
TQM8541_config \
@mkdir -p $(obj)include
@BTYPE=$(@:_config=); \
CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
- $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
- @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
-
-XPEDITE5200_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
-
-XPEDITE5370_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
+ @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc
#########################################################################
## MPC86xx Systems
#########################################################################
-MPC8610HPCD_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
-
MPC8641HPCN_36BIT_config \
MPC8641HPCN_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _36BIT_,$@)" ] ; then \
echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
- $(XECHO) "... enabling 36-bit physical addressing." ; \
fi
- @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
-
-sbc8641d_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
-
-XPEDITE5170_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
+ @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
#########################################################################
## 74xx/7xx Systems
#########################################################################
-AmigaOneG3SE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
-
-BAB7xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
-
-CPCI750_config: unconfig
- @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
-
-DB64360_config: unconfig
- @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
-
-DB64460_config: unconfig
- @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
-
-ELPPC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
-
EVB64260_config \
EVB64260_750CX_config: unconfig
- @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
-
-mpc7448hpc2_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
-
-P3G4_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260
p3m750_config \
p3m7448_config: unconfig
else \
echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
+ @$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive
PCIPPC2_config \
PCIPPC6_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
-
-ppmc7xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
-
-ZUMA_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2
#========================================================================
# ARM
#========================================================================
-#########################################################################
-## StrongARM Systems
-#########################################################################
-
-assabet_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
-
-dnp1110_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
-
-gcplus_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
-
-lart_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 lart
-
-shannon_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
-
-#########################################################################
-## ARM92xT Systems
-#########################################################################
-
-a320evb_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320
#########################################################################
## Atmel AT91RM9200 Systems
#########################################################################
-at91rm9200dk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
-
-at91rm9200ek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
-
-cmc_pu2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
-
CPUAT91_RAM_config \
CPUAT91_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
-
-csb637_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
-
-eb_cpux9k2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t eb_cpux9k2 BuS at91
-
-kb9202_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
-
-m501sk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
-
-mp2usb_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+ @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91
#########################################################################
## ARM926EJ-S Systems
#########################################################################
-afeb9260_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
-
-at91cap9adk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
-
at91sam9260ek_nandflash_config \
at91sam9260ek_dataflash_cs0_config \
at91sam9260ek_dataflash_cs1_config \
@mkdir -p $(obj)include
@if [ "$(findstring 9g20,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \
- $(XECHO) "... 9G20 Variant" ; \
else \
echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
fi;
- @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
at91sam9xeek_nandflash_config \
at91sam9xeek_dataflash_cs0_config \
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
fi;
- @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
@mkdir -p $(obj)include
@if [ "$(findstring 9g10,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \
- $(XECHO) "... 9G10 Variant" ; \
else \
echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
fi;
- @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
at91sam9263ek_norflash_config \
at91sam9263ek_norflash_boot_config \
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
elif [ "$(findstring norflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NOR FLASH" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
fi;
@if [ "$(findstring norflash_boot,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... and boot from NOR FLASH" ; \
fi;
- @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
at91sam9rlek_nandflash_config \
at91sam9rlek_dataflash_config \
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
fi;
- @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
CPU9G20_128M_config \
CPU9G20_config \
CPU9260_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
-
-meesc_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
-
-pm9261_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
+ @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91
at91sam9m10g45ek_nandflash_config \
at91sam9m10g45ek_dataflash_config \
@mkdir -p $(obj)include
@if [ "$(findstring 9m10,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \
- $(XECHO) "... 9M10G45 Variant" ; \
else \
echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
fi;
-
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
else \
echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
fi;
- @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
-
-otc570_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
+ @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
-pm9263_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+pm9g45_config : unconfig
+ @mkdir -p $(obj)include
+ @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
SBC35_A9G20_NANDFLASH_config \
SBC35_A9G20_EEPROM_config \
SBC35_A9G20_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
+ @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
TNY_A9G20_NANDFLASH_config \
TNY_A9G20_EEPROM_config \
TNY_A9260_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
+ @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
cp1026_config: unconfig
@board/armltd/integrator/split_by_variant.sh cp $@
-da830evm_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci
-
-davinci_dvevm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
-
-davinci_schmoogie_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
-
-davinci_sffsdr_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
-
-davinci_sonata_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
-
-davinci_dm355evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
-
-davinci_dm355leopard_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
-
-davinci_dm365evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
-
-davinci_dm6467evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
-
-imx27lite_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
-
-lpd7a400_config \
-lpd7a404_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
-
-mv88f6281gtw_ge_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
-
-mx1ads_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
-
-mx1fs2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
-
-netstar_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t netstar
-
nhk8815_config \
nhk8815_onenand_config: unconfig
@mkdir -p $(obj)include
@ > $(obj)include/config.h
@if [ "$(findstring _onenand, $@)" ] ; then \
echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
- $(XECHO) "... configured to boot from OneNand Flash"; \
- else \
- $(XECHO) "... configured to boot from Nand Flash"; \
fi
- @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
-
-omap1510inn_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
+ @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
- $(XECHO) "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for CS_AUTO boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for CS3 boot"; \
fi;
- @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
-
-omap5912osk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
-
-openrd_base_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
-
-xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
+ @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
omap730p2_config \
omap730p2_cs0boot_config \
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for CS0 boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for CS3 boot"; \
fi;
- @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
-
-rd6281a_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
-
-sbc2410x_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
-
-scb9328_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
-
-sheevaplug_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
-
-smdk2400_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
-
-smdk2410_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
+ @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
spear300_config \
spear310_config \
spear320_config : unconfig
- @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs $(@:_config=) spear spear
+ @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear
spear600_config : unconfig
- @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear
-
-suen3_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs km_arm keymile kirkwood
+ @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear
SX1_stdout_serial_config \
SX1_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for stdout serial"; \
else \
echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for stdout usbtty"; \
fi;
- @$(MKCONFIG) SX1 arm arm925t sx1
+ @$(MKCONFIG) -n $@ SX1 arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
-xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
-
trab_config \
trab_bigram_config \
trab_bigflash_config \
@[ -z "$(findstring _bigram,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \
- $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
}
@[ -z "$(findstring _bigflash,$@)" ] || \
{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
- $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
- $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
- @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
+ @$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0
tx25_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+ @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
-VCMA9_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
+edb9301_config \
+edb9302_config \
+edb9302a_config \
+edb9307_config \
+edb9307a_config \
+edb9312_config \
+edb9315_config \
+edb9315a_config: unconfig
+ @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
#########################################################################
# ARM supplied Versatile development boards
#########################################################################
-cm4008_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
-
-cm41xx_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
-
versatile_config \
versatileab_config \
versatilepb_config : unconfig
@board/armltd/versatile/split_by_variant.sh $@
-voiceblue_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
-
-#########################################################################
-## S3C44B0 Systems
-#########################################################################
-
-B2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
-
-#########################################################################
-## ARM720T Systems
-#########################################################################
-
-armadillo_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
-
-ep7312_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
-
-impa7_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t impa7
-
-modnet50_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
-
-evb4510_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
-
-lpc2292sodimm_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
-
-SMN42_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
-
-#########################################################################
-## ARM CORTEX Systems
-#########################################################################
-
-devkit8000_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
-
-omap3_beagle_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
-
-omap3_overo_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
-
-omap3_evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
-
-omap3_pandora_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
-
-omap3_sdp3430_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
-
-omap3_zoom1_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
-
-omap3_zoom2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
-
-smdkc100_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
-
#########################################################################
## XScale Systems
#########################################################################
-actux1_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp actux1
-
-actux2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp actux2
-
-actux3_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp actux3
-
-actux4_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp actux4
-
-cerf250_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa cerf250
-
-cradle_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa cradle
-
-csb226_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa csb226
-
-delta_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa delta
-
-innokom_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa innokom
-
-ixdp425_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
-
-ixdpg425_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
-
-lubbock_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa lubbock
-
-pleb2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa pleb2
-
-logodl_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa logodl
-
pdnb3_config \
scpu_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
- $(XECHO) "... on SCPU board variant" ; \
fi
- @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
-
-pxa255_idp_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
+ @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
polaris_config \
trizepsiv_config : unconfig
@if [ "$(findstring polaris,$@)" ] ; then \
echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
fi;
- @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
-
-wepep250_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa wepep250
+ @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv
-xaeniax_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
-
-xm250_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa xm250
-
-xsengine_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa xsengine
-
-zylonite_config :
- @$(MKCONFIG) $(@:_config=) arm pxa zylonite
+vpac270_nor_config \
+vpac270_onenand_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring onenand,$@)" ] ; then \
+ echo "#define CONFIG_ONENAND_U_BOOT" \
+ >>$(obj)include/config.h ; \
+ fi;
+ @$(MKCONFIG) -n $@ -a vpac270 arm pxa vpac270
#########################################################################
## ARM1136 Systems
apollon_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
-
-imx31_litekit_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
+ @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx
imx31_phycore_eet_config \
imx31_phycore_config : unconfig
@if [ -n "$(findstring _eet_,$@)" ]; then \
echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \
fi
- @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
-
-mx31ads_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
+ @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31
mx31pdk_config \
mx31pdk_nand_config : unconfig
echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \
echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \
fi
- @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
-
-mx51evk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51
-
-omap2420h4_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
-
-qong_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
+ @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31
#########################################################################
## ARM1176 Systems
@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \
echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
- $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \
else \
echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
- $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \
fi
+ @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-#========================================================================
-# i386
-#========================================================================
-#########################################################################
-## AMD SC520 CDP
-#########################################################################
-eNET_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
-
-sc520_cdp_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
-
-sc520_spunk_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
-
-sc520_spunk_rel_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
-
#========================================================================
# MIPS
#========================================================================
## MIPS32 4Kc
#########################################################################
-xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
-
incaip_100MHz_config \
incaip_133MHz_config \
incaip_150MHz_config \
incaip_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
- $(XECHO) "... with 100MHz system clock" ; \
- }
+ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h
@[ -z "$(findstring _133MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
- $(XECHO) "... with 133MHz system clock" ; \
- }
+ echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h
@[ -z "$(findstring _150MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
- $(XECHO) "... with 150MHz system clock" ; \
- }
- @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
-
-tb0229_config: unconfig
- @$(MKCONFIG) $(@:_config=) mips mips tb0229
+ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a incaip mips mips incaip
vct_premium_config \
vct_premium_small_config \
vct_platinumavc_onenand_config \
vct_platinumavc_onenand_small_config: unconfig
@mkdir -p $(obj)include
- @if [ "$(findstring _premium,$@)" ] ; then \
- echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
- $(XECHO) "... on Premium board variant" ; \
- fi
- @if [ "$(findstring _platinum_,$@)" ] ; then \
- echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
- $(XECHO) "... on Platinum board variant" ; \
- fi
- @if [ "$(findstring _platinumavc,$@)" ] ; then \
- echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
- $(XECHO) "... on PlatinumAVC board variant" ; \
- fi
- @if [ "$(findstring _onenand,$@)" ] ; then \
- echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
- $(XECHO) "... on OneNAND board variant" ; \
- fi
- @if [ "$(findstring _small,$@)" ] ; then \
- echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
- $(XECHO) "... stripped down image variant" ; \
- fi
- @$(MKCONFIG) -a vct mips mips vct micronas
+ @[ -z "$(findstring _premium,$@)" ] || \
+ echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h
+ @[ -z "$(findstring _platinum_,$@)" ] || \
+ echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h
+ @[ -z "$(findstring _platinumavc,$@)" ] || \
+ echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h
+ @[ -z "$(findstring _onenand,$@)" ] || \
+ echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h
+ @[ -z "$(findstring _small,$@)" ] || \
+ echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a vct mips mips vct micronas
#########################################################################
## MIPS32 AU1X00
gth2_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
- @$(MKCONFIG) -a gth2 mips mips gth2
+ @$(MKCONFIG) -a $@ mips mips gth2
pb1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
-#########################################################################
-## MIPS64 5Kc
-#########################################################################
-
-purple_config : unconfig
- @$(MKCONFIG) $(@:_config=) mips mips purple
-
#========================================================================
# Nios
#========================================================================
-#########################################################################
-## Nios32
-#########################################################################
-
-ADNPESC1_DNPEVA2_base_32_config \
-ADNPESC1_base_32_config \
-ADNPESC1_config: unconfig
- @mkdir -p $(obj)include
- @[ -z "$(findstring _DNPEVA2,$@)" ] || \
- { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
- $(XECHO) "... DNP/EVA2 configuration" ; \
- }
- @[ -z "$(findstring _base_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'base_32' configuration" ; \
- }
- @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
- }
- @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
-
-DK1C20_safe_32_config \
-DK1C20_standard_32_config \
-DK1C20_config: unconfig
- @mkdir -p $(obj)include
- @[ -z "$(findstring _safe_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'safe_32' configuration" ; \
- }
- @[ -z "$(findstring _standard_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'standard_32' configuration" ; \
- }
- @[ -z "$(findstring DK1C20_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
- }
- @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
-
-DK1S10_safe_32_config \
-DK1S10_standard_32_config \
-DK1S10_mtx_ldk_20_config \
-DK1S10_config: unconfig
- @mkdir -p $(obj)include
- @[ -z "$(findstring _safe_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'safe_32' configuration" ; \
- }
- @[ -z "$(findstring _standard_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'standard_32' configuration" ; \
- }
- @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
- { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
- }
- @[ -z "$(findstring DK1S10_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
- }
- @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
#########################################################################
## Nios-II
#########################################################################
-EP1C20_config : unconfig
- @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera
-
-EP1S10_config : unconfig
- @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera
-
-EP1S40_config : unconfig
- @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera
+# nios2 generic boards
+NIOS2_GENERIC = nios2-generic
-PK1C20_config : unconfig
- @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent
-
-PCI5441_config : unconfig
- @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent
-
-#========================================================================
-## Microblaze
-#========================================================================
-
-microblaze-generic_config: unconfig
- @mkdir -p $(obj)include
- @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
+$(NIOS2_GENERIC:%=%_config) : unconfig
+ @$(MKCONFIG) $@ nios2 nios2 nios2-generic altera
#========================================================================
# Blackfin
#========================================================================
-# Analog Devices boards
-BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
- bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
-
-# Bluetechnix tinyboards
-BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 \
- tcm-bf518 tcm-bf537
-
-# Misc third party boards
-BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp ip04
-
-# I-SYST Micromodule
-BFIN_BOARDS += ibf-dsp561
-
-$(BFIN_BOARDS:%=%_config) : unconfig
- @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
-
bf527-ezkit-v2_config : unconfig
@$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
bf527-ezkit blackfin blackfin bf527-ezkit
-#========================================================================
-# AVR32
-#========================================================================
-
-atngw100_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
-
-atstk1002_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-atstk1003_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-atstk1004_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-atstk1006_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-favr-32-ezkit_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
-
-hammerhead_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
-
-mimc200_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
-
#========================================================================
# SH3 (SuperH)
#========================================================================
rsk7203_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
+ @$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas
#########################################################################
## sh3 (Renesas SuperH)
mpr2_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
+ @$(MKCONFIG) -a $@ sh sh3 mpr2
ms7720se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
+ @$(MKCONFIG) -a $@ sh sh3 ms7720se
#########################################################################
## sh4 (Renesas SuperH)
MigoR_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
+ @$(MKCONFIG) -a $@ sh sh4 MigoR renesas
ms7750se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
+ @$(MKCONFIG) -a $@ sh sh4 ms7750se
ms7722se_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
+ @$(MKCONFIG) -a $@ sh sh4 ms7722se
r2dplus_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
+ @$(MKCONFIG) -a $@ sh sh4 r2dplus renesas
r7780mp_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
+ @$(MKCONFIG) -a $@ sh sh4 r7780mp renesas
sh7763rdp_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
+ @$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas
-xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
sh7785lcr_32bit_config \
sh7785lcr_config : unconfig
@mkdir -p $(obj)include
echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x8ff80000" > \
$(obj)board/renesas/sh7785lcr/config.tmp ; \
- $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
fi
- @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
+ @$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas
ap325rxa_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
+ @$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas
espt_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
+ @$(MKCONFIG) -a $@ sh sh4 espt
-#========================================================================
-# SPARC
-#========================================================================
-
-#########################################################################
-## LEON3
-#########################################################################
-
-# Gaisler GR-XC3S-1500 board
-gr_xc3s_1500_config : unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
-
-# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
-gr_cpci_ax2000_config : unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
-
-# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
-# Development board Stratix II edition, FPGA Device EP2S60.
-gr_ep2s60_config: unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
-
-# Gaisler LEON3 GRSIM simulator
-grsim_config : unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
-
-#########################################################################
-## LEON2
-#########################################################################
-
-# Gaisler LEON2 GRSIM simulator
-grsim_leon2_config : unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
-
-#########################################################################
#########################################################################
#########################################################################
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \
$(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
- $(obj)arch/blackfin/lib/u-boot.lds \
$(obj)u-boot.lds \
- $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
+ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.imx
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
- @rm -f $(obj)arch/ppc/cpu/mpc824x/bedbug_603e.c
+ @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
backup:
F=`basename $(TOPDIR)` ; cd .. ; \
- gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
+ gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
#########################################################################
projects / karo-tx-uboot.git / blobdiff