====================
/arch Architecture specific files
+ /arc Files generic to ARC architecture
+ /cpu CPU specific files
+ /arc700 Files specific to ARC 700 CPUs
+ /lib Architecture specific library files
/arm Files generic to ARM architecture
/cpu CPU specific files
/arm720t Files specific to ARM 720 CPUs
/mips Files generic to MIPS architecture
/cpu CPU specific files
/mips32 Files specific to MIPS32 CPUs
- /xburst Files specific to Ingenic XBurst CPUs
+ /mips64 Files specific to MIPS64 CPUs
/lib Architecture specific library files
/nds32 Files generic to NDS32 architecture
/cpu CPU specific files
In this mode, a single differential clock is used to supply
clocks to the sysclock, ddrclock and usbclock.
+ CONFIG_SYS_CPC_REINIT_F
+ This CONFIG is defined when the CPC is configured as SRAM at the
+ time of U-boot entry and is required to be re-initialized.
+
+ CONFIG_DEEP_SLEEP
+ Inidcates this SoC supports deep sleep feature. If deep sleep is
+ supported, core will start to execute uboot when wakes up.
+
- Generic CPU options:
CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
CONFIG_SYS_FSL_DDRC_GEN3
Freescale DDR3 controller.
+ CONFIG_SYS_FSL_DDRC_GEN4
+ Freescale DDR4 controller.
+
CONFIG_SYS_FSL_DDRC_ARM_GEN3
Freescale DDR3 controller for ARM-based SoCs.
CONFIG_SYS_FSL_DDR3
Board config to use DDR3. It can be enabled for SoCs with
- Freescale DDR3 controllers.
+ Freescale DDR3 or DDR3L controllers.
+
+ CONFIG_SYS_FSL_DDR3L
+ Board config to use DDR3L. It can be enabled for SoCs with
+ DDR3L controllers.
+
+ CONFIG_SYS_FSL_DDR4
+ Board config to use DDR4. It can be enabled for SoCs with
+ DDR4 controllers.
CONFIG_SYS_FSL_IFC_BE
Defines the IFC controller register space as Big Endian
PBI commands can be used to configure SoC before it starts the execution.
Please refer doc/README.pblimage for more details
+ CONFIG_SPL_FSL_PBL
+ It adds a target to create boot binary having SPL binary in PBI format
+ concatenated with u-boot binary.
+
CONFIG_SYS_FSL_DDR_BE
Defines the DDR controller register space as Big Endian
CONFIG_ARM_ERRATA_742230
CONFIG_ARM_ERRATA_743622
CONFIG_ARM_ERRATA_751472
+ CONFIG_ARM_ERRATA_794072
+ CONFIG_ARM_ERRATA_761320
If set, the workarounds for these ARM errata are applied early
during U-Boot startup. Note that these options force the
The default command configuration includes all commands
except those marked below with a "*".
+ CONFIG_CMD_AES AES 128 CBC encrypt/decrypt
CONFIG_CMD_ASKENV * ask for env variable
CONFIG_CMD_BDI bdinfo
CONFIG_CMD_BEDBUG * Include BedBug Debugger
CONFIG_CMD_CDP * Cisco Discover Protocol support
CONFIG_CMD_MFSL * Microblaze FSL support
CONFIG_CMD_XIMG Load part of Multi Image
-
+ CONFIG_CMD_UUID * Generate random UUID or GUID string
EXAMPLE: If you want all functions except of network
support you can write:
for your device
- CONFIG_USBD_PRODUCTID 0xFFFF
- Some USB device drivers may need to check USB cable attachment.
- In this case you can enable following config in BoardName.h:
- CONFIG_USB_CABLE_CHECK
- This enables function definition:
- - usb_cable_connected() in include/usb.h
- Implementation of this function is board-specific.
-
- ULPI Layer Support:
The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via
the generic ULPI layer. The generic layer accesses the ULPI PHY
supports MMC, NAND and YMODEM loading of U-Boot and NAND
NAND loading of the Linux Kernel.
+ CONFIG_SPL_OS_BOOT
+ Enable booting directly to an OS from SPL.
+ See also: doc/README.falcon
+
CONFIG_SPL_DISPLAY_PRINT
For ARM, enable an optional function to print more information
about the running system.
continuing (the hardware starts execution after just
loading the first page rather than the full 4K).
+ CONFIG_SPL_SKIP_RELOCATE
+ Avoid SPL relocation
+
CONFIG_SPL_NAND_BASE
Include nand_base.c in the SPL. Requires
CONFIG_SPL_NAND_DRIVERS.
Support for NAND boot using simple NAND drivers that
expose the cmd_ctrl() interface.
+ CONFIG_SPL_MTD_SUPPORT
+ Support for the MTD subsystem within SPL. Useful for
+ environment on NAND support within SPL.
+
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
Set for the SPL on PPC mpc8xxx targets, support for
drivers/ddr/fsl/libddr.o in SPL binary.
- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
Enables the RTC32K OSC on AM33xx based plattforms
+- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+ Option to disable subpage write in NAND driver
+ driver that uses this:
+ drivers/mtd/nand/davinci_nand.c
+
Freescale QE/FMAN Firmware Support:
-----------------------------------
are used to identify the storage device (NOR flash, SPI, etc) and the address
within that device.
-- CONFIG_SYS_QE_FMAN_FW_ADDR
- The address in the storage device where the firmware is located. The
+- CONFIG_SYS_FMAN_FW_ADDR
+ The address in the storage device where the FMAN microcode is located. The
+ meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
+ is also specified.
+
+- CONFIG_SYS_QE_FW_ADDR
+ The address in the storage device where the QE microcode is located. The
meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
is also specified.
projects / karo-tx-uboot.git / blobdiff