Merge branch 'tom' of git://git.denx.de/u-boot-x86

[karo-tx-uboot.git] / README

diff --git a/README b/README
index cb96322fb71d0e4301182759fa53c4afdc6b3167..80a1bfaad2a5093fa05d3ac3341a97216f5820ee 100644 (file)
--- a/README
+++ b/README
@@ -132,6 +132,10 @@ Directory Hierarchy:
 ====================
 
 /arch                  Architecture specific files
+  /arc                 Files generic to ARC architecture
+    /cpu               CPU specific files
+      /arc700          Files specific to ARC 700 CPUs
+    /lib               Architecture specific library files
   /arm                 Files generic to ARM architecture
     /cpu               CPU specific files
       /arm720t         Files specific to ARM 720 CPUs
@@ -164,7 +168,7 @@ Directory Hierarchy:
   /mips                        Files generic to MIPS architecture
     /cpu               CPU specific files
       /mips32          Files specific to MIPS32 CPUs
-      /xburst          Files specific to Ingenic XBurst CPUs
+      /mips64          Files specific to MIPS64 CPUs
     /lib               Architecture specific library files
   /nds32               Files generic to NDS32 architecture
     /cpu               CPU specific files
@@ -260,6 +264,17 @@ e.g. "make cogent_mpc8xx_config". And also configure the cogent
 directory according to the instructions in cogent/README.
 
 
+Sandbox Environment:
+--------------------
+
+U-Boot can be built natively to run on a Linux host using the 'sandbox'
+board. This allows feature development which is not board- or architecture-
+specific to be undertaken on a native platform. The sandbox is also used to
+run some of U-Boot's tests.
+
+See board/sandbox/sandbox/README.sandbox for more details.
+
+
 Configuration Options:
 ----------------------
 
@@ -431,6 +446,10 @@ The following options need to be configured:
                This CONFIG is defined when the CPC is configured as SRAM at the
                time of U-boot entry and is required to be re-initialized.
 
+               CONFIG_DEEP_SLEEP
+               Inidcates this SoC supports deep sleep feature. If deep sleep is
+               supported, core will start to execute uboot when wakes up.
+
 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
@@ -458,6 +477,9 @@ The following options need to be configured:
                CONFIG_SYS_FSL_DDRC_GEN3
                Freescale DDR3 controller.
 
+               CONFIG_SYS_FSL_DDRC_GEN4
+               Freescale DDR4 controller.
+
                CONFIG_SYS_FSL_DDRC_ARM_GEN3
                Freescale DDR3 controller for ARM-based SoCs.
 
@@ -473,7 +495,15 @@ The following options need to be configured:
 
                CONFIG_SYS_FSL_DDR3
                Board config to use DDR3. It can be enabled for SoCs with
-               Freescale DDR3 controllers.
+               Freescale DDR3 or DDR3L controllers.
+
+               CONFIG_SYS_FSL_DDR3L
+               Board config to use DDR3L. It can be enabled for SoCs with
+               DDR3L controllers.
+
+               CONFIG_SYS_FSL_DDR4
+               Board config to use DDR4. It can be enabled for SoCs with
+               DDR4 controllers.
 
                CONFIG_SYS_FSL_IFC_BE
                Defines the IFC controller register space as Big Endian
@@ -490,6 +520,10 @@ The following options need to be configured:
                PBI commands can be used to configure SoC before it starts the execution.
                Please refer doc/README.pblimage for more details
 
+               CONFIG_SPL_FSL_PBL
+               It adds a target to create boot binary having SPL binary in PBI format
+               concatenated with u-boot binary.
+
                CONFIG_SYS_FSL_DDR_BE
                Defines the DDR controller register space as Big Endian
 
@@ -1461,13 +1495,6 @@ The following options need to be configured:
                        for your device
                        - CONFIG_USBD_PRODUCTID 0xFFFF
 
-               Some USB device drivers may need to check USB cable attachment.
-               In this case you can enable following config in BoardName.h:
-                       CONFIG_USB_CABLE_CHECK
-                       This enables function definition:
-                       - usb_cable_connected() in include/usb.h
-                       Implementation of this function is board-specific.
-
 - ULPI Layer Support:
                The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via
                the generic ULPI layer. The generic layer accesses the ULPI PHY
@@ -3259,6 +3286,10 @@ FIT uImage format:
                supports MMC, NAND and YMODEM loading of U-Boot and NAND
                NAND loading of the Linux Kernel.
 
+               CONFIG_SPL_OS_BOOT
+               Enable booting directly to an OS from SPL.
+               See also: doc/README.falcon
+
                CONFIG_SPL_DISPLAY_PRINT
                For ARM, enable an optional function to print more information
                about the running system.
@@ -3317,6 +3348,9 @@ FIT uImage format:
                continuing (the hardware starts execution after just
                loading the first page rather than the full 4K).
 
+               CONFIG_SPL_SKIP_RELOCATE
+               Avoid SPL relocation
+
                CONFIG_SPL_NAND_BASE
                Include nand_base.c in the SPL.  Requires
                CONFIG_SPL_NAND_DRIVERS.
@@ -3331,6 +3365,10 @@ FIT uImage format:
                Support for NAND boot using simple NAND drivers that
                expose the cmd_ctrl() interface.
 
+               CONFIG_SPL_MTD_SUPPORT
+               Support for the MTD subsystem within SPL.  Useful for
+               environment on NAND support within SPL.
+
                CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
                Set for the SPL on PPC mpc8xxx targets, support for
                drivers/ddr/fsl/libddr.o in SPL binary.
@@ -4493,6 +4531,11 @@ Low Level (hardware related) configuration options:
 - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
                Enables the RTC32K OSC on AM33xx based plattforms
 
+- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+               Option to disable subpage write in NAND driver
+               driver that uses this:
+               drivers/mtd/nand/davinci_nand.c
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------