#
-# (C) Copyright 2000 - 2012
+# (C) Copyright 2000 - 2013
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# SPDX-License-Identifier: GPL-2.0+
#
Summary:
"working". In fact, many of them are used in production systems.
In case of problems see the CHANGELOG and CREDITS files to find out
-who contributed the specific port. The MAINTAINERS file lists board
+who contributed the specific port. The boards.cfg file lists board
maintainers.
Note: There is no CHANGELOG file in the actual U-Boot source tree;
/at91 Files specific to Atmel AT91RM9200 CPU
/imx Files specific to Freescale MC9328 i.MX CPUs
/s3c24x0 Files specific to Samsung S3C24X0 CPUs
- /arm925t Files specific to ARM 925 CPUs
/arm926ejs Files specific to ARM 926 CPUs
/arm1136 Files specific to ARM 1136 CPUs
/ixp Files specific to Intel XScale IXP CPUs
/pxa Files specific to Intel XScale PXA CPUs
- /s3c44b0 Files specific to Samsung S3C44B0 CPUs
/sa1100 Files specific to Intel StrongARM SA1100 CPUs
/lib Architecture specific library files
/avr32 Files generic to AVR32 architecture
/blackfin Files generic to Analog Devices Blackfin architecture
/cpu CPU specific files
/lib Architecture specific library files
- /x86 Files generic to x86 architecture
- /cpu CPU specific files
- /lib Architecture specific library files
/m68k Files generic to m68k architecture
/cpu CPU specific files
/mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs
/nios2 Files generic to Altera NIOS2 architecture
/cpu CPU specific files
/lib Architecture specific library files
+ /openrisc Files generic to OpenRISC architecture
+ /cpu CPU specific files
+ /lib Architecture specific library files
/powerpc Files generic to PowerPC architecture
/cpu CPU specific files
/74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs
/leon2 Files specific to Gaisler LEON2 SPARC CPU
/leon3 Files specific to Gaisler LEON3 SPARC CPU
/lib Architecture specific library files
+ /x86 Files generic to x86 architecture
+ /cpu CPU specific files
+ /lib Architecture specific library files
/api Machine/arch independent API for external apps
/board Board dependent files
/common Misc architecture independent functions
/disk Code for disk drive partition handling
/doc Documentation (don't expect too much)
/drivers Commonly used device drivers
+/dts Contains Makefile for building internal U-Boot fdt.
/examples Example code for standalone applications, etc.
/fs Filesystem code (cramfs, ext2, jffs2, etc.)
/include Header Files
/lzo Library files to support LZO decompression
/net Networking code
/post Power On Self Test
-/rtc Real Time Clock drivers
+/spl Secondary Program Loader framework
/tools Tools to build S-Record or U-Boot images, etc.
Software Configuration:
This is the value to write into CCSR offset 0x18600
according to the A004510 workaround.
+ CONFIG_SYS_FSL_DSP_DDR_ADDR
+ This value denotes start offset of DDR memory which is
+ connected exclusively to the DSP cores.
+
CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
This value denotes start offset of M2 memory
which is directly connected to the DSP core.
+ CONFIG_SYS_FSL_DSP_M3_RAM_ADDR
+ This value denotes start offset of M3 memory which is directly
+ connected to the DSP core.
+
CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
This value denotes start offset of DSP CCSR space.
+ CONFIG_SYS_FSL_DDR_EMU
+ Specify emulator support for DDR. Some DDR features such as
+ deskew training are not available.
+
- Generic CPU options:
CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
the "silent" environment variable. See
doc/README.silent for more information.
+ CONFIG_SYS_CONSOLE_BG_COL: define the backgroundcolor, default
+ is 0x00.
+ CONFIG_SYS_CONSOLE_FG_COL: define the foregroundcolor, default
+ is 0xa0.
+
- Console Baudrate:
CONFIG_BAUDRATE - in bps
Select one of the baudrates listed in
CONFIG_CMD_ELF * bootelf, bootvx
CONFIG_CMD_ENV_CALLBACK * display details about env callbacks
CONFIG_CMD_ENV_FLAGS * display details about env flags
+ CONFIG_CMD_ENV_EXISTS * check existence of env variable
CONFIG_CMD_EXPORTENV * export the environment
CONFIG_CMD_EXT2 * ext2 command support
CONFIG_CMD_EXT4 * ext4 command support
- Regular expression support:
CONFIG_REGEX
- If this variable is defined, U-Boot is linked against
- the SLRE (Super Light Regular Expression) library,
- which adds regex support to some commands, as for
- example "env grep" and "setexpr".
+ If this variable is defined, U-Boot is linked against
+ the SLRE (Super Light Regular Expression) library,
+ which adds regex support to some commands, as for
+ example "env grep" and "setexpr".
- Device tree:
CONFIG_OF_CONTROL
- GPIO Support:
CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO
- CONFIG_PCA953X_INFO - enable pca953x info command
The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of
chip-ngpio pairs that tell the PCA953X driver the number of
devices.
CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
- The environment variable 'scsidevs' is set to the number of
- SCSI devices found during the last scan.
+ The environment variable 'scsidevs' is set to the number of
+ SCSI devices found during the last scan.
- NETWORK Support (PCI):
CONFIG_E1000
CONFIG_TPM_TIS_I2C_BURST_LIMITATION
Define the burst count bytes upper limit
+ CONFIG_TPM_ATMEL_TWI
+ Support for Atmel TWI TPM device. Requires I2C support.
+
CONFIG_TPM_TIS_LPC
Support for generic parallel port TPM devices. Only one device
per system is supported at this time.
to. Contemporary x86 systems usually map it at
0xfed40000.
+ CONFIG_CMD_TPM
+ Add tpm monitor functions.
+ Requires CONFIG_TPM. If CONFIG_TPM_AUTH_SESSIONS is set, also
+ provides monitor access to authorized functions.
+
+ CONFIG_TPM
+ Define this to enable the TPM support library which provides
+ functional interfaces to some TPM commands.
+ Requires support for a TPM device.
+
+ CONFIG_TPM_AUTH_SESSIONS
+ Define this to enable authorized functions in the TPM library.
+ Requires CONFIG_TPM and CONFIG_SHA1.
+
- USB Support:
At the moment only the UHCI host controller is
supported (PIP405, MIP405, MPC5200); define
for your device
- CONFIG_USBD_PRODUCTID 0xFFFF
+ Some USB device drivers may need to check USB cable attachment.
+ In this case you can enable following config in BoardName.h:
+ CONFIG_USB_CABLE_CHECK
+ This enables function definition:
+ - usb_cable_connected() in include/usb.h
+ Implementation of this function is board-specific.
+
- ULPI Layer Support:
The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via
the generic ULPI layer. The generic layer accesses the ULPI PHY
CONFIG_DFU_NAND
This enables support for exposing NAND devices via DFU.
+ CONFIG_DFU_RAM
+ This enables support for exposing RAM via DFU.
+ Note: DFU spec refer to non-volatile memory usage, but
+ allow usages beyond the scope of spec - here RAM usage,
+ one that would help mostly the developer.
+
CONFIG_SYS_DFU_DATA_BUF_SIZE
Dfu transfer uses a buffer before writing data to the
raw storage device. Make the size (in bytes) of this buffer
=> vertically centered image
at x = dspWidth - bmpWidth - 9
- CONFIG_SPLASH_SCREEN_PREPARE
-
- If this option is set then the board_splash_screen_prepare()
- function, which must be defined in your code, is called as part
- of the splash screen display sequence. It gives the board an
- opportunity to prepare the splash image data before it is
- processed and sent to the frame buffer by U-Boot.
-
- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
If this option is set, additionally to standard BMP
to compress the specified memory at its best effort.
- Compression support:
+ CONFIG_GZIP
+
+ Enabled by default to support gzip compressed images.
+
CONFIG_BZIP2
If this option is set, support for bzip2 compressed
then calculate the amount of needed dynamic memory (ensuring
the appropriate CONFIG_SYS_MALLOC_LEN value).
+ CONFIG_LZO
+
+ If this option is set, support for LZO compressed images
+ is included.
+
- MII/PHY support:
CONFIG_PHY_ADDR
on those systems that support this (optional)
feature, like the TQM8xxL modules.
-- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C
-
- These enable I2C serial bus commands. Defining either of
- (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
- include the appropriate I2C driver for the selected CPU.
+- I2C Support: CONFIG_SYS_I2C
+
+ This enable the NEW i2c subsystem, and will allow you to use
+ i2c commands at the u-boot command line (as long as you set
+ CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c
+ based realtime clock chips or other i2c devices. See
+ common/cmd_i2c.c for a description of the command line
+ interface.
+
+ ported i2c driver to the new framework:
+ - drivers/i2c/soft_i2c.c:
+ - activate first bus with CONFIG_SYS_I2C_SOFT define
+ CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE
+ for defining speed and slave address
+ - activate second bus with I2C_SOFT_DECLARATIONS2 define
+ CONFIG_SYS_I2C_SOFT_SPEED_2 and CONFIG_SYS_I2C_SOFT_SLAVE_2
+ for defining speed and slave address
+ - activate third bus with I2C_SOFT_DECLARATIONS3 define
+ CONFIG_SYS_I2C_SOFT_SPEED_3 and CONFIG_SYS_I2C_SOFT_SLAVE_3
+ for defining speed and slave address
+ - activate fourth bus with I2C_SOFT_DECLARATIONS4 define
+ CONFIG_SYS_I2C_SOFT_SPEED_4 and CONFIG_SYS_I2C_SOFT_SLAVE_4
+ for defining speed and slave address
+
+ - drivers/i2c/fsl_i2c.c:
+ - activate i2c driver with CONFIG_SYS_I2C_FSL
+ define CONFIG_SYS_FSL_I2C_OFFSET for setting the register
+ offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and
+ CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first
+ bus.
+ - If your board supports a second fsl i2c bus, define
+ CONFIG_SYS_FSL_I2C2_OFFSET for the register offset
+ CONFIG_SYS_FSL_I2C2_SPEED for the speed and
+ CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the
+ second bus.
+
+ - drivers/i2c/tegra_i2c.c:
+ - activate this driver with CONFIG_SYS_I2C_TEGRA
+ - This driver adds 4 i2c buses with a fix speed from
+ 100000 and the slave addr 0!
+
+ - drivers/i2c/ppc4xx_i2c.c
+ - activate this driver with CONFIG_SYS_I2C_PPC4XX
+ - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0
+ - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1
+
+ - drivers/i2c/i2c_mxc.c
+ - activate this driver with CONFIG_SYS_I2C_MXC
+ - define speed for bus 1 with CONFIG_SYS_MXC_I2C1_SPEED
+ - define slave for bus 1 with CONFIG_SYS_MXC_I2C1_SLAVE
+ - define speed for bus 2 with CONFIG_SYS_MXC_I2C2_SPEED
+ - define slave for bus 2 with CONFIG_SYS_MXC_I2C2_SLAVE
+ - define speed for bus 3 with CONFIG_SYS_MXC_I2C3_SPEED
+ - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE
+ If thoses defines are not set, default value is 100000
+ for speed, and 0 for slave.
+
+ - drivers/i2c/rcar_i2c.c:
+ - activate this driver with CONFIG_SYS_I2C_RCAR
+ - This driver adds 4 i2c buses
+
+ - CONFIG_SYS_RCAR_I2C0_BASE for setting the register channel 0
+ - CONFIG_SYS_RCAR_I2C0_SPEED for for the speed channel 0
+ - CONFIG_SYS_RCAR_I2C1_BASE for setting the register channel 1
+ - CONFIG_SYS_RCAR_I2C1_SPEED for for the speed channel 1
+ - CONFIG_SYS_RCAR_I2C2_BASE for setting the register channel 2
+ - CONFIG_SYS_RCAR_I2C2_SPEED for for the speed channel 2
+ - CONFIG_SYS_RCAR_I2C3_BASE for setting the register channel 3
+ - CONFIG_SYS_RCAR_I2C3_SPEED for for the speed channel 3
+ - CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS for number of i2c buses
+
+ additional defines:
+
+ CONFIG_SYS_NUM_I2C_BUSES
+ Hold the number of i2c busses you want to use. If you
+ don't use/have i2c muxes on your i2c bus, this
+ is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can
+ omit this define.
+
+ CONFIG_SYS_I2C_DIRECT_BUS
+ define this, if you don't use i2c muxes on your hardware.
+ if CONFIG_SYS_I2C_MAX_HOPS is not defined or == 0 you can
+ omit this define.
+
+ CONFIG_SYS_I2C_MAX_HOPS
+ define how many muxes are maximal consecutively connected
+ on one i2c bus. If you not use i2c muxes, omit this
+ define.
+
+ CONFIG_SYS_I2C_BUSES
+ hold a list of busses you want to use, only used if
+ CONFIG_SYS_I2C_DIRECT_BUS is not defined, for example
+ a board with CONFIG_SYS_I2C_MAX_HOPS = 1 and
+ CONFIG_SYS_NUM_I2C_BUSES = 9:
+
+ CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 3}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 4}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 5}}}, \
+ {1, {I2C_NULL_HOP}}, \
+ {1, {{I2C_MUX_PCA9544, 0x72, 1}}}, \
+ {1, {{I2C_MUX_PCA9544, 0x72, 2}}}, \
+ }
+
+ which defines
+ bus 0 on adapter 0 without a mux
+ bus 1 on adapter 0 with a PCA9547 on address 0x70 port 1
+ bus 2 on adapter 0 with a PCA9547 on address 0x70 port 2
+ bus 3 on adapter 0 with a PCA9547 on address 0x70 port 3
+ bus 4 on adapter 0 with a PCA9547 on address 0x70 port 4
+ bus 5 on adapter 0 with a PCA9547 on address 0x70 port 5
+ bus 6 on adapter 1 without a mux
+ bus 7 on adapter 1 with a PCA9544 on address 0x72 port 1
+ bus 8 on adapter 1 with a PCA9544 on address 0x72 port 2
+
+ If you do not have i2c muxes on your board, omit this define.
+
+- Legacy I2C Support: CONFIG_HARD_I2C
+
+ NOTE: It is intended to move drivers to CONFIG_SYS_I2C which
+ provides the following compelling advantages:
+
+ - more than one i2c adapter is usable
+ - approved multibus support
+ - better i2c mux support
+
+ ** Please consider updating your I2C driver now. **
+
+ These enable legacy I2C serial bus commands. Defining
+ CONFIG_HARD_I2C will include the appropriate I2C driver
+ for the selected CPU.
This will allow you to use i2c commands at the u-boot
command line (as long as you set CONFIG_CMD_I2C in
CONFIG_HARD_I2C selects a hardware I2C controller.
- CONFIG_SOFT_I2C configures u-boot to use a software (aka
- bit-banging) driver instead of CPM or similar hardware
- support for I2C.
-
There are several other quantities that must also be
- defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C.
+ defined when you define CONFIG_HARD_I2C.
In both cases you will need to define CONFIG_SYS_I2C_SPEED
to be the frequency (in Hz) at which you wish your i2c bus
That's all that's required for CONFIG_HARD_I2C.
- If you use the software i2c interface (CONFIG_SOFT_I2C)
+ If you use the software i2c interface (CONFIG_SYS_I2C_SOFT)
then the following macros need to be defined (examples are
from include/configs/lwmon.h):
If not defined, then U-Boot uses predefined value for
specified DTT device.
- CONFIG_FSL_I2C
-
- Define this option if you want to use Freescale's I2C driver in
- drivers/i2c/fsl_i2c.c.
-
- CONFIG_I2C_MUX
-
- Define this option if you have I2C devices reached over 1 .. n
- I2C Muxes like the pca9544a. This option addes a new I2C
- Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a
- new I2C Bus to the existing I2C Busses. If you select the
- new Bus with "i2c dev", u-bbot sends first the commandos for
- the muxes to activate this new "bus".
-
- CONFIG_I2C_MULTI_BUS must be also defined, to use this
- feature!
-
- Example:
- Adding a new I2C Bus reached over 2 pca9544a muxes
- The First mux with address 70 and channel 6
- The Second mux with address 71 and channel 4
-
- => i2c bus pca9544a:70:6:pca9544a:71:4
-
- Use the "i2c bus" command without parameter, to get a list
- of I2C Busses with muxes:
-
- => i2c bus
- Busses reached over muxes:
- Bus ID: 2
- reached over Mux(es):
- pca9544a@70 ch: 4
- Bus ID: 3
- reached over Mux(es):
- pca9544a@70 ch: 6
- pca9544a@71 ch: 4
- =>
-
- If you now switch to the new I2C Bus 3 with "i2c dev 3"
- u-boot first sends the command to the mux@70 to enable
- channel 6, and then the command to the mux@71 to enable
- the channel 4.
-
- After that, you can use the "normal" i2c commands as
- usual to communicate with your I2C devices behind
- the 2 muxes.
-
- This option is actually implemented for the bitbanging
- algorithm in common/soft_i2c.c and for the Hardware I2C
- Bus on the MPC8260. But it should be not so difficult
- to add this option to other architectures.
-
CONFIG_SOFT_I2C_READ_REPEATED_START
defining this will force the i2c_read() function in
Note: There is also a sha1sum command, which should perhaps
be deprecated in favour of 'hash sha1'.
+- Freescale i.MX specific commands:
+ CONFIG_CMD_HDMIDETECT
+ This enables 'hdmidet' command which returns true if an
+ HDMI monitor is detected. This command is i.MX 6 specific.
+
+ CONFIG_CMD_BMODE
+ This enables the 'bmode' (bootmode) command for forcing
+ a boot from specific media.
+
+ This is useful for forcing the ROM's usb downloader to
+ activate upon a watchdog reset which is nice when iterating
+ on U-Boot. Using the reset button or running bmode normal
+ will set it back to normal. This command currently
+ supports i.MX53 and i.MX6.
+
- Signing support:
CONFIG_RSA
Support for NAND boot using simple NAND drivers that
expose the cmd_ctrl() interface.
+ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+ Set for the SPL on PPC mpc8xxx targets, support for
+ arch/powerpc/cpu/mpc8xxx/ddr/libddr.o in SPL binary.
+
+ CONFIG_SPL_COMMON_INIT_DDR
+ Set for common ddr init with serial presence detect in
+ SPL binary.
+
CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT,
CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE,
CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS,
option to re-enable it. This will affect the output of the
bootm command when booting a FIT image.
+- TPL framework
+ CONFIG_TPL
+ Enable building of TPL globally.
+
+ CONFIG_TPL_PAD_TO
+ Image offset to which the TPL should be padded before appending
+ the TPL payload. By default, this is defined as
+ CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
+ CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
+ payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
+
Modem Support:
--------------
the Linux kernel; all data that must be processed by
the Linux kernel (bd_info, boot arguments, FDT blob if
used) must be put below this limit, unless "bootm_low"
- enviroment variable is defined and non-zero. In such case
+ environment variable is defined and non-zero. In such case
all data for the Linux kernel must be between "bootm_low"
and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment
variable "bootm_mapsize" will override the value of
- CONFIG_ENV_FLAGS_LIST_DEFAULT
- CONFIG_ENV_FLAGS_LIST_STATIC
- Enable validation of the values given to enviroment variables when
+ Enable validation of the values given to environment variables when
calling env set. Variables can be restricted to only decimal,
hexadecimal, or boolean. If CONFIG_CMD_NET is also defined,
the variables can also be restricted to IP address or MAC address.
I2C muxes, you can define here, how to reach this
EEPROM. For example:
- #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0"
+ #define CONFIG_I2C_ENV_EEPROM_BUS 1
EEPROM which holds the environment, is reached over
a pca9547 i2c mux with address 0x70, channel 3.
that is executed before the actual U-Boot. E.g. when
compiling a NAND SPL.
+- CONFIG_TPL_BUILD
+ Modifies the behaviour of start.S when compiling a loader
+ that is executed after the SPL and before the actual U-Boot.
+ It is loaded by the SPL.
+
- CONFIG_SYS_MPC85XX_NO_RESETVEC
Only for 85xx systems. If this variable is specified, the section
.resetvec is not kept and the section .bootpg is placed in the
npe_ucode - set load address for the NPE microcode
+ silent_linux - If set then linux will be told to boot silently, by
+ changing the console to be empty. If "yes" it will be
+ made silent. If "no" it will not be made silent. If
+ unset, then it will be made silent if the U-Boot console
+ is silent.
+
tftpsrcport - If this is set, the value is used for TFTP's
UDP source port.
R0: function argument word/integer result
R1-R3: function argument word
- R9: GOT pointer
- R10: stack limit (used only if stack checking if enabled)
+ R9: platform specific
+ R10: stack limit (used only if stack checking is enabled)
R11: argument (frame) pointer
R12: temporary workspace
R13: stack pointer
R14: link register
R15: program counter
- ==> U-Boot will use R8 to hold a pointer to the global data
+ ==> U-Boot will use R9 to hold a pointer to the global data
+
+ Note: on ARM, only R_ARM_RELATIVE relocations are supported.
On Nios II, the ABI is documented here:
http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf
* For major contributions, your entry to the CREDITS file
-* When you add support for a new board, don't forget to add this
- board to the MAINTAINERS file, too.
+* When you add support for a new board, don't forget to add a
+ maintainer e-mail address to the boards.cfg file, too.
* If your patch adds new configuration options, don't forget to
document these in the README file.
projects / karo-tx-uboot.git / blobdiff