*/
#include <common.h>
+#include <div64.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/imx-regs.h>
enum pll_clocks {
PLL_ARM, /* PLL1: ARM PLL */
- PLL_BUS, /* PLL2: System Bus PLL*/
+ PLL_528, /* PLL2: System Bus PLL*/
PLL_USBOTG, /* PLL3: OTG USB PLL */
PLL_AUDIO, /* PLL4: Audio PLL */
PLL_VIDEO, /* PLL5: Video PLL */
if (!clk)
return 0;
if (clk->usecount == 0) {
-debug("%s: Enabling %s clock\n", __func__, clk->name);
+ debug("%s: Enabling %s clock\n", __func__, clk->name);
ret = clk->enable(clk);
if (ret)
return ret;
assert(clk->usecount > 0);
if (!(--clk->usecount)) {
if (clk->disable) {
-debug("%s: Disabling %s clock\n", __func__, clk->name);
+ debug("%s: Disabling %s clock\n", __func__, clk->name);
clk->disable(clk);
}
}
}
#endif
+#ifdef CONFIG_NAND_MXS
+void setup_gpmi_io_clk(u32 cfg)
+{
+ /* Disable clocks per ERR007177 from MX6 errata */
+ clrbits_le32(&imx_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+ clrbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+
+ clrsetbits_le32(&imx_ccm->cs2cdr,
+ MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
+ MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
+ cfg);
+
+ setbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+ setbits_le32(&imx_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+}
+#endif
+
void enable_usboh3_clk(unsigned char enable)
{
u32 reg;
}
-#ifdef CONFIG_I2C_MXC
+#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_MX6SX)
+void enable_enet_clk(unsigned char enable)
+{
+ u32 mask = MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK;
+
+ if (enable)
+ setbits_le32(&imx_ccm->CCGR1, mask);
+ else
+ clrbits_le32(&imx_ccm->CCGR1, mask);
+}
+#endif
+
+#ifdef CONFIG_MXC_UART
+void enable_uart_clk(unsigned char enable)
+{
+ u32 mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;
+
+ if (enable)
+ setbits_le32(&imx_ccm->CCGR5, mask);
+ else
+ clrbits_le32(&imx_ccm->CCGR5, mask);
+}
+#endif
+
+#ifdef CONFIG_SPI
+/* spi_num can be from 0 - 4 */
+int enable_cspi_clock(unsigned char enable, unsigned spi_num)
+{
+ u32 mask;
+
+ if (spi_num > 4)
+ return -EINVAL;
+
+ mask = MXC_CCM_CCGR_CG_MASK << (spi_num * 2);
+ if (enable)
+ setbits_le32(&imx_ccm->CCGR1, mask);
+ else
+ clrbits_le32(&imx_ccm->CCGR1, mask);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_MMC
+int enable_usdhc_clk(unsigned char enable, unsigned bus_num)
+{
+ u32 mask;
+
+ if (bus_num > 3)
+ return -EINVAL;
+
+ mask = MXC_CCM_CCGR_CG_MASK << (bus_num * 2 + 2);
+ if (enable)
+ setbits_le32(&imx_ccm->CCGR6, mask);
+ else
+ clrbits_le32(&imx_ccm->CCGR6, mask);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_I2C_MXC
/* i2c_num can be from 0 - 2 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
}
#endif
+/* spi_num can be from 0 - SPI_MAX_NUM */
+int enable_spi_clk(unsigned char enable, unsigned spi_num)
+{
+ u32 reg;
+ u32 mask;
+
+ if (spi_num > SPI_MAX_NUM)
+ return -EINVAL;
+
+ mask = MXC_CCM_CCGR_CG_MASK << (spi_num << 1);
+ reg = __raw_readl(&imx_ccm->CCGR1);
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ __raw_writel(reg, &imx_ccm->CCGR1);
+ return 0;
+}
static u32 decode_pll(enum pll_clocks pll, u32 infreq)
{
u32 div;
div &= BM_ANADIG_PLL_ARM_DIV_SELECT;
return infreq * div / 2;
- case PLL_BUS:
+ case PLL_528:
div = __raw_readl(&anatop->pll_528);
- if (div & BM_ANADIG_PLL_SYS_BYPASS)
+ if (div & BM_ANADIG_PLL_528_BYPASS)
return infreq;
- div &= BM_ANADIG_PLL_SYS_DIV_SELECT;
+ div &= BM_ANADIG_PLL_528_DIV_SELECT;
return infreq * (20 + div * 2);
case PLL_USBOTG:
div = __raw_readl(&anatop->usb1_pll_480_ctrl);
- if (div & BM_ANADIG_USB1_PLL_480_CTRL_BYPASS)
+ if (div & BM_ANADIG_USB_PLL_480_CTRL_BYPASS)
return infreq;
- div &= BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT;
+ div &= BM_ANADIG_USB_PLL_480_CTRL_DIV_SELECT;
return infreq * (20 + div * 2);
case PLL_AUDIO:
return infreq;
div &= BM_ANADIG_PLL_ENET_DIV_SELECT;
- return (div == 3 ? 125000000 : 25000000 * div * 2);
+ return 25000000 * (div + (div >> 1) + 1);
case PLL_USB2:
div = __raw_readl(&anatop->usb2_pll_480_ctrl);
- if (div & BM_ANADIG_USB2_PLL_480_CTRL_BYPASS)
+ if (div & BM_ANADIG_USB_PLL_480_CTRL_BYPASS)
return infreq;
- div &= BM_ANADIG_USB2_PLL_480_CTRL_DIV_SELECT;
+ div &= BM_ANADIG_USB_PLL_480_CTRL_DIV_SELECT;
return infreq * (20 + div * 2);
case PLL_MLB:
}
return 0;
}
+static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
+{
+ u32 div;
+ u64 freq;
+ struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+
+ switch (pll) {
+ case PLL_528:
+ if (pfd_num == 3) {
+ /* No PFD3 on PLL2 */
+ return 0;
+ }
+ div = __raw_readl(&anatop->pfd_528);
+ freq = (u64)decode_pll(PLL_528, MXC_HCLK);
+ break;
+ case PLL_USBOTG:
+ div = __raw_readl(&anatop->pfd_480);
+ freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK);
+ break;
+ default:
+ /* No PFD on other PLL */
+ return 0;
+ }
+
+ return lldiv(freq * 18, (div & ANATOP_PFD_FRAC_MASK(pfd_num)) >>
+ ANATOP_PFD_FRAC_SHIFT(pfd_num));
+}
static u32 get_mcu_main_clk(void)
{
switch (reg) {
case 0:
- freq = decode_pll(PLL_BUS, MXC_HCLK);
+ freq = decode_pll(PLL_528, MXC_HCLK);
break;
case 1:
- freq = PLL2_PFD2_FREQ;
+ freq = mxc_get_pll_pfd(PLL_528, 2);
break;
case 2:
- freq = PLL2_PFD0_FREQ;
+ freq = mxc_get_pll_pfd(PLL_528, 0);
break;
case 3:
- freq = PLL2_PFD2_DIV_FREQ;
+ /* static / 2 divider */
+ freq = mxc_get_pll_pfd(PLL_528, 2) / 2;
break;
}
}
u32 reg, perclk_podf;
reg = __raw_readl(&imx_ccm->cscmr1);
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
+ if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
+ return MXC_HCLK; /* OSC 24Mhz */
+#endif
perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK;
return get_ipg_clk() / (perclk_podf + 1);
static u32 get_uart_clk(void)
{
u32 reg, uart_podf;
- u32 freq = PLL3_80M;
+ u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
reg = __raw_readl(&imx_ccm->cscdr1);
-#ifdef CONFIG_MX6SL
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
freq = MXC_HCLK;
#endif
reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
- return PLL3_60M / (cspi_podf + 1);
+ return decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
}
static u32 get_axi_clk(void)
if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
- root_freq = PLL2_PFD2_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_528, 2);
else
- root_freq = PLL3_PFD1_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1);
} else
root_freq = get_periph_clk();
static u32 get_emi_slow_clk(void)
{
- u32 emi_clk_sel, emi_slow_pof, cscmr1, root_freq = 0;
+ u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0;
cscmr1 = __raw_readl(&imx_ccm->cscmr1);
emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK;
emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET;
- emi_slow_pof = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK;
- emi_slow_pof >>= MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET;
+ emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK;
+ emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET;
switch (emi_clk_sel) {
case 0:
root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
break;
case 2:
- root_freq = PLL2_PFD2_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_528, 2);
break;
case 3:
- root_freq = PLL2_PFD0_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_528, 0);
break;
}
- return root_freq / (emi_slow_pof + 1);
+ return root_freq / (emi_slow_podf + 1);
}
static u32 get_nfc_clk(void)
switch (nfc_clk_sel) {
case 0:
- root_freq = PLL2_PFD0_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_528, 0);
break;
case 1:
- root_freq = decode_pll(PLL_BUS, MXC_HCLK);
+ root_freq = decode_pll(PLL_528, MXC_HCLK);
break;
case 2:
root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
break;
case 3:
- root_freq = PLL2_PFD2_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_528, 2);
break;
}
switch (nfc_clk_sel) {
case 0:
- root_freq = PLL2_PFD0_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_528, 0);
break;
case 1:
- root_freq = decode_pll(PLL_BUS, MXC_HCLK);
+ root_freq = decode_pll(PLL_528, MXC_HCLK);
break;
case 2:
root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
break;
case 3:
- root_freq = PLL2_PFD2_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_528, 2);
break;
}
if (root_freq < freq)
continue;
- podf = min(DIV_ROUND_UP(root_freq, freq), 1 << 6);
- pred = min(DIV_ROUND_UP(root_freq / podf, freq), 8);
+ podf = min(DIV_ROUND_UP(root_freq, freq), 1U << 6);
+ pred = min(DIV_ROUND_UP(root_freq / podf, freq), 8U);
act_freq = root_freq / pred / podf;
err = (freq - act_freq) * 100 / freq;
debug("root=%d[%u] freq=%u pred=%u podf=%u act=%u err=%d\n",
return 0;
}
-#ifdef CONFIG_MX6SL
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
static u32 get_mmdc_ch0_clk(void)
{
u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
case 0:
- freq = decode_pll(PLL_BUS, MXC_HCLK);
+ freq = decode_pll(PLL_528, MXC_HCLK);
break;
case 1:
- freq = PLL2_PFD2_FREQ;
+ freq = mxc_get_pll_pfd(PLL_528, 2);
break;
case 2:
- freq = PLL2_PFD0_FREQ;
+ freq = mxc_get_pll_pfd(PLL_528, 0);
break;
case 3:
- freq = PLL2_PFD2_DIV_FREQ;
+ /* static / 2 divider */
+ freq = mxc_get_pll_pfd(PLL_528, 2) / 2;
}
return freq / (podf + 1);
}
#endif
+#ifdef CONFIG_MX6SX
+/* qspi_num can be from 0 - 1 */
+void enable_qspi_clk(int qspi_num)
+{
+ u32 reg = 0;
+ /* Enable QuadSPI clock */
+ switch (qspi_num) {
+ case 0:
+ /* disable the clock gate */
+ clrbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);
+
+ /* set 50M : (50 = 396 / 2 / 4) */
+ reg = readl(&imx_ccm->cscmr1);
+ reg &= ~(MXC_CCM_CSCMR1_QSPI1_PODF_MASK |
+ MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK);
+ reg |= ((1 << MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET) |
+ (2 << MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET));
+ writel(reg, &imx_ccm->cscmr1);
+
+ /* enable the clock gate */
+ setbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);
+ break;
+ case 1:
+ /*
+ * disable the clock gate
+ * QSPI2 and GPMI_BCH_INPUT_GPMI_IO share the same clock gate,
+ * disable both of them.
+ */
+ clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
+
+ /* set 50M : (50 = 396 / 2 / 4) */
+ reg = readl(&imx_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
+ MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
+ MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK);
+ reg |= (MXC_CCM_CS2CDR_QSPI2_CLK_PRED(0x1) |
+ MXC_CCM_CS2CDR_QSPI2_CLK_SEL(0x3));
+ writel(reg, &imx_ccm->cs2cdr);
+
+ /*enable the clock gate*/
+ setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
+ break;
+ default:
+ break;
+ }
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+int enable_fec_anatop_clock(enum enet_freq freq)
+{
+ u32 reg = 0;
+ s32 timeout = 100000;
+
+ struct anatop_regs __iomem *anatop =
+ (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+
+ if (freq < ENET_25MHZ || freq > ENET_125MHZ)
+ return -EINVAL;
+
+ reg = readl(&anatop->pll_enet);
+ reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT;
+ reg |= freq;
+
+ if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) ||
+ (!(reg & BM_ANADIG_PLL_ENET_LOCK))) {
+ reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN;
+ writel(reg, &anatop->pll_enet);
+ while (timeout--) {
+ if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK)
+ break;
+ }
+ if (timeout < 0)
+ return -ETIMEDOUT;
+ }
+
+ /* Enable FEC clock */
+ reg |= BM_ANADIG_PLL_ENET_ENABLE;
+ reg &= ~BM_ANADIG_PLL_ENET_BYPASS;
+ writel(reg, &anatop->pll_enet);
+
+#ifdef CONFIG_MX6SX
+ /*
+ * Set enet ahb clock to 200MHz
+ * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
+ */
+ reg = readl(&imx_ccm->chsccdr);
+ reg &= ~(MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK
+ | MXC_CCM_CHSCCDR_ENET_PODF_MASK
+ | MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK);
+ /* PLL2 PFD2 */
+ reg |= (4 << MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET);
+ /* Div = 2*/
+ reg |= (1 << MXC_CCM_CHSCCDR_ENET_PODF_OFFSET);
+ reg |= (0 << MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET);
+ writel(reg, &imx_ccm->chsccdr);
+
+ /* Enable enet system clock */
+ reg = readl(&imx_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_ENET_MASK;
+ writel(reg, &imx_ccm->CCGR3);
+#endif
+ return 0;
+}
+#endif
+
static u32 get_usdhc_clk(u32 port)
{
u32 root_freq = 0, usdhc_podf = 0, clk_sel = 0;
}
if (clk_sel)
- root_freq = PLL2_PFD0_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_528, 0);
else
- root_freq = PLL2_PFD2_FREQ;
+ root_freq = mxc_get_pll_pfd(PLL_528, 2);
return root_freq / (usdhc_podf + 1);
}
u32 imx_get_fecclk(void)
{
- return decode_pll(PLL_ENET, MXC_HCLK);
+ return mxc_get_clock(MXC_IPG_CLK);
}
-int enable_sata_clock(void)
+static int enable_enet_pll(uint32_t en)
{
u32 reg;
s32 timeout = 100000;
- /* Enable sata clock */
- reg = readl(&imx_ccm->CCGR5); /* CCGR5 */
- reg |= MXC_CCM_CCGR5_SATA_MASK;
- writel(reg, &imx_ccm->CCGR5);
-
/* Enable PLLs */
reg = readl(&anatop->pll_enet);
reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN;
return -EIO;
reg &= ~BM_ANADIG_PLL_ENET_BYPASS;
writel(reg, &anatop->pll_enet);
- reg |= BM_ANADIG_PLL_ENET_ENABLE_SATA;
+ reg |= en;
writel(reg, &anatop->pll_enet);
+ return 0;
+}
+
+#ifndef CONFIG_MX6SX
+static void ungate_sata_clock(void)
+{
+ struct mxc_ccm_reg *const imx_ccm =
+ (struct mxc_ccm_reg *)CCM_BASE_ADDR;
- return 0 ;
+ /* Enable SATA clock. */
+ setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
+}
+#endif
+
+static void ungate_pcie_clock(void)
+{
+ struct mxc_ccm_reg *const imx_ccm =
+ (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* Enable PCIe clock. */
+ setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK);
+}
+
+#ifndef CONFIG_MX6SX
+int enable_sata_clock(void)
+{
+ ungate_sata_clock();
+ return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA);
+}
+
+void disable_sata_clock(void)
+{
+ struct mxc_ccm_reg *const imx_ccm =
+ (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ clrbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
+}
+#endif
+
+int enable_pcie_clock(void)
+{
+ struct anatop_regs *anatop_regs =
+ (struct anatop_regs *)ANATOP_BASE_ADDR;
+ struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ u32 lvds1_clk_sel;
+
+ /*
+ * Here be dragons!
+ *
+ * The register ANATOP_MISC1 is not documented in the Freescale
+ * MX6RM. The register that is mapped in the ANATOP space and
+ * marked as ANATOP_MISC1 is actually documented in the PMU section
+ * of the datasheet as PMU_MISC1.
+ *
+ * Switch LVDS clock source to SATA (0xb) on mx6q/dl or PCI (0xa) on
+ * mx6sx, disable clock INPUT and enable clock OUTPUT. This is important
+ * for PCI express link that is clocked from the i.MX6.
+ */
+#define ANADIG_ANA_MISC1_LVDSCLK1_IBEN (1 << 12)
+#define ANADIG_ANA_MISC1_LVDSCLK1_OBEN (1 << 10)
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK 0x0000001F
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb
+
+ if (is_cpu_type(MXC_CPU_MX6SX))
+ lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF;
+ else
+ lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF;
+
+ clrsetbits_le32(&anatop_regs->ana_misc1,
+ ANADIG_ANA_MISC1_LVDSCLK1_IBEN |
+ ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK,
+ ANADIG_ANA_MISC1_LVDSCLK1_OBEN | lvds1_clk_sel);
+
+ /* PCIe reference clock sourced from AXI. */
+ clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);
+
+ /* Party time! Ungate the clock to the PCIe. */
+#ifndef CONFIG_MX6SX
+ ungate_sata_clock();
+#endif
+ ungate_pcie_clock();
+
+ return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA |
+ BM_ANADIG_PLL_ENET_ENABLE_PCIE);
+}
+
+#ifdef CONFIG_SECURE_BOOT
+void hab_caam_clock_enable(unsigned char enable)
+{
+ u32 reg;
+
+ /* CG4 ~ CG6, CAAM clocks */
+ reg = __raw_readl(&imx_ccm->CCGR0);
+ if (enable)
+ reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
+ MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
+ MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
+ else
+ reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
+ MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
+ MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
+ __raw_writel(reg, &imx_ccm->CCGR0);
+
+ /* EMI slow clk */
+ reg = __raw_readl(&imx_ccm->CCGR6);
+ if (enable)
+ reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
+ else
+ reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
+ __raw_writel(reg, &imx_ccm->CCGR6);
+}
+#endif
+
+static void enable_pll3(void)
+{
+ struct anatop_regs __iomem *anatop =
+ (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+
+ /* make sure pll3 is enabled */
+ if ((readl(&anatop->usb1_pll_480_ctrl) &
+ BM_ANADIG_USB_PLL_480_CTRL_LOCK) == 0) {
+ /* enable pll's power */
+ writel(BM_ANADIG_USB_PLL_480_CTRL_POWER,
+ &anatop->usb1_pll_480_ctrl_set);
+ writel(0x80, &anatop->ana_misc2_clr);
+ /* wait for pll lock */
+ while ((readl(&anatop->usb1_pll_480_ctrl) &
+ BM_ANADIG_USB_PLL_480_CTRL_LOCK) == 0)
+ ;
+ /* disable bypass */
+ writel(BM_ANADIG_USB_PLL_480_CTRL_BYPASS,
+ &anatop->usb1_pll_480_ctrl_clr);
+ /* enable pll output */
+ writel(BM_ANADIG_USB_PLL_480_CTRL_ENABLE,
+ &anatop->usb1_pll_480_ctrl_set);
+ }
+}
+
+void enable_thermal_clk(void)
+{
+ enable_pll3();
}
void ipu_clk_enable(void)
return get_ahb_clk();
case MXC_NFC_CLK:
return get_nfc_clk();
+ default:
+ printf("Unsupported MXC CLK: %d\n", clk);
}
- return -1;
+ return 0;
}
static inline int gcd(int m, int n)
static void do_mx6_showclocks(void)
{
print_pll(PLL_ARM);
- print_pll(PLL_BUS);
+ print_pll(PLL_528);
print_pll(PLL_USBOTG);
print_pll(PLL_AUDIO);
print_pll(PLL_VIDEO);
case MXC_ARM_CLK:
if (argc > 3)
return CMD_RET_USAGE;
- ref = CONFIG_SYS_MX6_HCLK;
+ ref = MXC_HCLK;
break;
case MXC_NFC_CLK:
return CMD_RET_FAILURE;
}
+#ifndef CONFIG_MX6SX
+void enable_ipu_clock(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ int reg;
+ reg = readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK;
+ writel(reg, &mxc_ccm->CCGR3);
+}
+#endif
/***************************************************/
U_BOOT_CMD(
projects / karo-tx-uboot.git / blobdiff