mx6: Revert "mx6: soc: Disable VDDPU regulator"

[karo-tx-uboot.git] / arch / arm / cpu / armv7 / mx6 / soc.c

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 009a644abf23d50ce1092047e4ca7e9264ab1d2e..0208cba9cc7a50a08514987db65b33ac9b39c022 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -19,8 +19,6 @@
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 
-#define VDDPU_MASK     (0x1f << 9)
-
 enum ldo_reg {
        LDO_ARM,
        LDO_SOC,
@@ -179,50 +177,11 @@ static void imx_set_wdog_powerdown(bool enable)
        writew(enable, &wdog2->wmcr);
 }
 
-static void imx_set_vddpu_power_down(void)
-{
-       struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
-       struct gpc_regs *gpc = (struct gpc_regs *)GPC_BASE_ADDR;
-
-       u32 reg;
-
-       /*
-        * Disable the brown out detection since we are going to be
-        * disabling the LDO.
-        */
-       reg = readl(&anatop->ana_misc2);
-       reg &= ~ANADIG_ANA_MISC2_REG1_BO_EN;
-       writel(reg, &anatop->ana_misc2);
-
-       /* need to power down xPU in GPC before turning off PU LDO */
-       reg = readl(&gpc->gpu_ctrl);
-       writel(reg | 0x1, &gpc->gpu_ctrl);
-
-       reg = readl(&gpc->ctrl);
-       writel(reg | 0x1, &gpc->ctrl);
-       while (readl(&gpc->ctrl) & 0x1)
-               ;
-
-       /* Mask the ANATOP brown out interrupt in the GPC. */
-       reg = readl(&gpc->imr4);
-       reg |= 0x80000000;
-       writel(reg, &gpc->imr4);
-
-       /* disable VDDPU */
-       writel(VDDPU_MASK, &anatop->reg_core_clr);
-
-       /* Clear the BO interrupt in the ANATOP. */
-       reg = readl(&anatop->ana_misc1);
-       reg |= 0x80000000;
-       writel(reg, &anatop->ana_misc1);
-}
-
 int arch_cpu_init(void)
 {
        init_aips();
 
        imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
-       imx_set_vddpu_power_down();
 
 #ifdef CONFIG_APBH_DMA
        /* Start APBH DMA */