*/
#include <common.h>
-#include <stdbool.h>
-#include <dm.h>
#include <div64.h>
#include <ipu.h>
-#include <imx_thermal.h>
#include <asm/armv7.h>
#include <asm/bootm.h>
#include <asm/pl310.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/regs-ocotp.h>
#include <asm/arch/clock.h>
-#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/regs-ocotp.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/dma.h>
+#include <stdbool.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/crm_regs.h>
+#include <dm.h>
+#include <imx_thermal.h>
DECLARE_GLOBAL_DATA_PTR;
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
u32 reg = readl(&anatop->digprog_sololite);
u32 type = ((reg >> 16) & 0xff);
- u32 major;
+ u32 major, cfg = 0;
if (type != MXC_CPU_MX6SL) {
reg = readl(&anatop->digprog);
struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
- u32 cfg = readl(&scu->config) & 3;
+ cfg = readl(&scu->config) & 3;
type = ((reg >> 16) & 0xff);
if (type == MXC_CPU_MX6DL) {
if (!cfg)
}
major = ((reg >> 8) & 0xff);
+ if ((major >= 1) &&
+ ((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D))) {
+ major--;
+ type = MXC_CPU_MX6QP;
+ if (cfg == 1)
+ type = MXC_CPU_MX6DP;
+ }
reg &= 0xff; /* mx6 silicon revision */
return (type << 12) | (reg + (0x10 * (major + 1)));
}
struct mx6_ocotp_regs *const ocotp_regs = (void *)OCOTP_BASE_ADDR;
if (!thermal_calib) {
- ocotp_clk_enable();
+ enable_ocotp_clk(1);
writel(1, &ocotp_regs->hw_ocotp_read_ctrl);
thermal_calib = readl(&ocotp_regs->hw_ocotp_ana1);
writel(0, &ocotp_regs->hw_ocotp_read_ctrl);
- ocotp_clk_disable();
+ enable_ocotp_clk(0);
}
if (thermal_calib == 0 || thermal_calib == 0xffffffff)
{
struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
-
-#ifdef CONFIG_MX6SX
struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
- writew(enable, &wdog3->wmcr);
-#endif
+
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
+ writew(enable, &wdog3->wmcr);
/* Write to the PDE (Power Down Enable) bit */
writew(enable, &wdog1->wmcr);
static void clear_mmdc_ch_mask(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ u32 reg;
+ reg = readl(&mxc_ccm->ccdr);
/* Clear MMDC channel mask */
- writel(0, &mxc_ccm->ccdr);
+ reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
+ writel(reg, &mxc_ccm->ccdr);
}
static void init_bandgap(void)
u32 mask528;
u32 reg, periph1, periph2;
- if (is_cpu_type(MXC_CPU_MX6SX))
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
return;
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs