armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate omap_hw_init_context

[karo-tx-uboot.git] / arch / arm / include / asm / arch-am33xx / sys_proto.h

diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 819ea650f00245069f5b93617de43e2d52c8834c..33a82fca98db67e3c89a5dba552b92d22dd89111 100644 (file)
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -5,59 +5,43 @@
  *
  * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
-
-/*
- * AM335x parts define a system EEPROM that defines certain sub-fields.
- * We use these fields to in turn see what board we are on, and what
- * that might require us to set or not set.
- */
-#define HDR_NO_OF_MAC_ADDR     3
-#define HDR_ETH_ALEN           6
-#define HDR_NAME_LEN           8
-
-struct am335x_baseboard_id {
-       unsigned int  magic;
-       char name[HDR_NAME_LEN];
-       char version[4];
-       char serial[12];
-       char config[32];
-       char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
-};
+#include <linux/mtd/omap_gpmc.h>
+#include <asm/ti-common/sys_proto.h>
+#include <asm/arch/cpu.h>
 
 #define BOARD_REV_ID   0x0
 
 u32 get_cpu_rev(void);
 u32 get_sysboot_value(void);
 
-#ifdef CONFIG_DISPLAY_CPUINFO
-int print_cpuinfo(void);
-#endif
-
 extern struct ctrl_stat *cstat;
 u32 get_device_type(void);
+void save_omap_boot_params(void);
 void setup_clocks_for_console(void);
+void mpu_pll_config_val(int mpull_m);
 void ddr_pll_config(unsigned int ddrpll_M);
 
-/*
- * We have three pin mux functions that must exist.  We must be able to enable
- * uart0, for initial output and i2c0 to read the main EEPROM.  We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(struct am335x_baseboard_id *header);
+void sdelay(unsigned long);
+
+struct gpmc_cs;
+void gpmc_init(void);
+void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
+                       u32 size);
+void omap_nand_switch_ecc(uint32_t, uint32_t);
+
+void set_uart_mux_conf(void);
+void set_mux_conf_regs(void);
+void sdram_init(void);
+u32 wait_on_value(u32, u32, void *, u32);
+#ifdef CONFIG_NOR_BOOT
+void enable_norboot_pin_mux(void);
+#endif
+void am33xx_spl_board_init(void);
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev);
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
 #endif