* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/system.h>
+#include <asm/cache.h>
+#include <linux/compiler.h>
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
-#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
-#define CACHE_SETUP 0x1a
-#else
-#define CACHE_SETUP 0x1e
-#endif
-
DECLARE_GLOBAL_DATA_PTR;
-void __arm_init_before_mmu(void)
+__weak void arm_init_before_mmu(void)
+{
+}
+
+__weak void arm_init_domains(void)
{
}
-void arm_init_before_mmu(void)
- __attribute__((weak, alias("__arm_init_before_mmu")));
-static void cp_delay (void)
+void set_section_dcache(int section, enum dcache_option option)
{
- volatile int i;
+ u32 *page_table = (u32 *)gd->arch.tlb_addr;
+ u32 value;
+
+ value = (section << MMU_SECTION_SHIFT) | (3 << 10);
+ value |= option;
+ page_table[section] = value;
+}
- /* copro seems to need some delay between reading and writing */
- for (i = 0; i < 100; i++)
- nop();
- asm volatile("" : : : "memory");
+__weak void mmu_page_table_flush(unsigned long start, unsigned long stop)
+{
+ debug("%s: Warning: not implemented\n", __func__);
}
-static inline void dram_bank_mmu_setup(int bank)
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
+ enum dcache_option option)
+{
+ u32 *page_table = (u32 *)gd->arch.tlb_addr;
+ unsigned long upto, end;
+
+ end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT;
+ start = start >> MMU_SECTION_SHIFT;
+ debug("%s: start=%pa, size=%zu, option=%d\n", __func__, &start, size,
+ option);
+ for (upto = start; upto < end; upto++)
+ set_section_dcache(upto, option);
+ mmu_page_table_flush((u32)&page_table[start], (u32)&page_table[end]);
+}
+
+__weak void dram_bank_mmu_setup(int bank)
{
- u32 *page_table = (u32 *)gd->tlb_addr;
bd_t *bd = gd->bd;
int i;
debug("%s: bank: %d\n", __func__, bank);
for (i = bd->bi_dram[bank].start >> 20;
- i < (bd->bi_dram[bank].start + bd->bi_dram[bank].size) >> 20;
+ i < (bd->bi_dram[bank].start >> 20) + (bd->bi_dram[bank].size >> 20);
i++) {
- page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP;
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+ set_section_dcache(i, DCACHE_WRITETHROUGH);
+#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
+ set_section_dcache(i, DCACHE_WRITEALLOC);
+#else
+ set_section_dcache(i, DCACHE_WRITEBACK);
+#endif
}
}
/* to activate the MMU we need to set up virtual memory: use 1M areas */
static inline void mmu_setup(void)
{
- u32 *page_table = (u32 *)gd->tlb_addr;
int i;
u32 reg;
arm_init_before_mmu();
/* Set up an identity-mapping for all 4GB, rw for everyone */
for (i = 0; i < 4096; i++)
- page_table[i] = i << 20 | (3 << 10) | 0x12;
+ set_section_dcache(i, DCACHE_OFF);
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
dram_bank_mmu_setup(i);
}
+#ifdef CONFIG_ARMV7
+ /* Set TTBR0 */
+ reg = gd->arch.tlb_addr & TTBR0_BASE_ADDR_MASK;
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+ reg |= TTBR0_RGN_WT | TTBR0_IRGN_WT;
+#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
+ reg |= TTBR0_RGN_WBWA | TTBR0_IRGN_WBWA;
+#else
+ reg |= TTBR0_RGN_WB | TTBR0_IRGN_WB;
+#endif
+ asm volatile("mcr p15, 0, %0, c2, c0, 0"
+ : : "r" (reg) : "memory");
+#else
/* Copy the page table address to cp15 */
asm volatile("mcr p15, 0, %0, c2, c0, 0"
- : : "r" (page_table) : "memory");
+ : : "r" (gd->arch.tlb_addr) : "memory");
+#endif
/* Set the access control to all-supervisor */
asm volatile("mcr p15, 0, %0, c3, c0, 0"
: : "r" (~0));
+
+ arm_init_domains();
+
/* and enable the mmu */
reg = get_cr(); /* get control reg. */
- cp_delay();
set_cr(reg | CR_M);
}
if ((cache_bit == CR_C) && !mmu_enabled())
mmu_setup();
reg = get_cr(); /* get control reg. */
- cp_delay();
set_cr(reg | cache_bit);
}
uint32_t reg;
reg = get_cr();
- cp_delay();
if (cache_bit == CR_C) {
/* if cache isn;t enabled no need to disable */
return;
/* if disabling data cache, disable mmu too */
cache_bit |= CR_M;
- flush_dcache_all();
}
+ reg = get_cr();
+ if (cache_bit == (CR_C | CR_M))
+ flush_dcache_all();
set_cr(reg & ~cache_bit);
}
#endif
projects / karo-tx-uboot.git / blobdiff