#include <asm/io.h>
#include <asm/cache.h>
#include <asm/mmu.h>
+#include <asm/fsl_errata.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_srio.h>
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
+{
+#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
+ u32 xcvrprg = in_be32(&usb_phy->port1.xcvrprg);
+
+ /* Increase Disconnect Threshold by 50mV */
+ xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
+ INC_DCNT_THRESHOLD_50MV;
+ /* Enable programming of USB High speed Disconnect threshold */
+ xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
+ out_be32(&usb_phy->port1.xcvrprg, xcvrprg);
+
+ xcvrprg = in_be32(&usb_phy->port2.xcvrprg);
+ /* Increase Disconnect Threshold by 50mV */
+ xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
+ INC_DCNT_THRESHOLD_50MV;
+ /* Enable programming of USB High speed Disconnect threshold */
+ xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
+ out_be32(&usb_phy->port2.xcvrprg, xcvrprg);
+#else
+
+ u32 temp = 0;
+ u32 status = in_be32(&usb_phy->status1);
+
+ u32 squelch_prog_rd_0_2 =
+ (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_0)
+ & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
+
+ u32 squelch_prog_rd_3_5 =
+ (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_3)
+ & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
+
+ setbits_be32(&usb_phy->config1,
+ CONFIG_SYS_FSL_USB_HS_DISCNCT_INC);
+ setbits_be32(&usb_phy->config2,
+ CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL);
+
+ temp = squelch_prog_rd_0_2 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0;
+ out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
+
+ temp = squelch_prog_rd_3_5 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3;
+ out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
+#endif
+}
+#endif
+
+
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21));
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006379
+ if (has_erratum_a006379()) {
+ setbits_be32(&cpc->cpchdbcr0,
+ CPC_HDBCR0_SPLRU_LEVEL_EN);
+ }
+#endif
out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
/* Read back to sync write */
}
- printf("Corenet Platform Cache: %d KB enabled\n", size);
+ puts("Corenet Platform Cache: ");
+ print_size(size * 1024, " enabled\n");
}
static void invalidate_cpc(void)
}
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
-#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
int enable_cluster_l2(void)
{
int i = 0;
#endif
#ifdef CONFIG_L2_CACHE
ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
-#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
#endif
#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
extern int spin_table_compat;
const char *spin;
#endif
-
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+ ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
/*
case 0x1:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8555) {
- puts("128 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
+ puts("128 KiB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */
cache_ctl = 0xc4000000;
} else {
- puts("256 KB ");
+ puts("256 KiB ");
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
}
break;
case 0x2:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8555) {
- puts("256 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
+ puts("256 KiB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */
cache_ctl = 0xc8000000;
} else {
- puts ("512 KB ");
+ puts("512 KiB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
}
break;
case 0x3:
- puts("1024 KB ");
+ puts("1024 KiB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
break;
if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
;
- printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
+ print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n");
}
skip_l2:
-#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
if (l2cache->l2csr0 & L2CSR0_L2E)
- printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+ print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024,
+ " enabled\n");
enable_cluster_l2();
#else
fsl_serdes_init();
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+#define MCFGR_AXIPIPE 0x000000f0
+ if (IS_SVR_REV(svr, 1, 0))
+ clrbits_be32(&sec->mcfgr, MCFGR_AXIPIPE);
+#endif
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
if (IS_SVR_REV(svr, 1, 0)) {
int i;
{
struct ccsr_usb_phy __iomem *usb_phy1 =
(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+ if (has_erratum_a006261())
+ fsl_erratum_a006261_workaround(usb_phy1);
+#endif
out_be32(&usb_phy1->usb_enable_override,
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
}
{
struct ccsr_usb_phy __iomem *usb_phy2 =
(void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+ if (has_erratum_a006261())
+ fsl_erratum_a006261_workaround(usb_phy2);
+#endif
out_be32(&usb_phy2->usb_enable_override,
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
}
CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
setbits_be32(&usb_phy->port2.pwrfltcfg,
CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+ if (has_erratum_a006261())
+ fsl_erratum_a006261_workaround(usb_phy);
#endif
+#endif /* CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE */
+
#ifdef CONFIG_FMAN_ENET
fman_enet_init();
#endif
projects / karo-tx-uboot.git / blobdiff