Merge git://git.denx.de/u-boot-arm

[karo-tx-uboot.git] / board / freescale / mx6sabresd / mx6sabresd.c

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 936f029b4ec88b5e4f9a4fba7fadb29c0bc91293..5db516d5fd92fa07a248c55efcd7267693016c54 100644 (file)
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -18,7 +18,12 @@
 #include <fsl_esdhc.h>
 #include <miiphy.h>
 #include <netdev.h>
-
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/crm_regs.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                  \
@@ -228,6 +233,60 @@ int board_phy_config(struct phy_device *phydev)
        return 0;
 }
 
+#if defined(CONFIG_VIDEO_IPUV3)
+static struct fb_videomode const hdmi = {
+       .name           = "HDMI",
+       .refresh        = 60,
+       .xres           = 1024,
+       .yres           = 768,
+       .pixclock       = 15385,
+       .left_margin    = 220,
+       .right_margin   = 40,
+       .upper_margin   = 21,
+       .lower_margin   = 7,
+       .hsync_len      = 60,
+       .vsync_len      = 10,
+       .sync           = FB_SYNC_EXT,
+       .vmode          = FB_VMODE_NONINTERLACED
+};
+
+int board_video_skip(void)
+{
+       int ret;
+
+       ret = ipuv3_fb_init(&hdmi, 0, IPU_PIX_FMT_RGB24);
+
+       if (ret)
+               printf("HDMI cannot be configured: %d\n", ret);
+
+       imx_enable_hdmi_phy();
+       return ret;
+}
+
+static void setup_display(void)
+{
+       struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+       int reg;
+
+       enable_ipu_clock();
+       imx_setup_hdmi();
+
+       reg = readl(&mxc_ccm->chsccdr);
+       reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+               << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+       writel(reg, &mxc_ccm->chsccdr);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+       return 1;
+}
+
 int board_eth_init(bd_t *bis)
 {
        int ret;
@@ -244,6 +303,9 @@ int board_eth_init(bd_t *bis)
 int board_early_init_f(void)
 {
        setup_iomux_uart();
+#if defined(CONFIG_VIDEO_IPUV3)
+       setup_display();
+#endif
 
        return 0;
 }