#include <netdev.h>
#include <mmc.h>
#include <mxcfb.h>
+#include <video_fb.h>
#include <linux/list.h>
#include <linux/fb.h>
#include <asm/io.h>
int board_init(void)
{
- if (ctrlc()) {
+ if (ctrlc())
printf("CTRL-C detected; safeboot enabled\n");
- return 1;
- }
/* Address of boot parameters */
#ifdef CONFIG_OF_LIBFDT
#ifdef CONFIG_FEC_MXC
#ifdef CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
-#ifdef CONFIG_FEC_MXC_MULTI
+#ifndef CONFIG_TX28_S
#define FEC_MAX_IDX 1
#else
#define FEC_MAX_IDX 0
val = readl(&cust[index * 8 + i]);
mac[i] = val >> shift;
}
- if (!is_valid_ether_addr(mac)) {
+ if (!is_valid_ethaddr(mac)) {
if (index == 0)
printf("No valid MAC address programmed\n");
return 0;
eth_setenv_enetaddr(env_name, mac);
return 0;
}
+
+static inline int tx28_fec1_enabled(void)
+{
+ const char *status;
+ int off;
+
+ if (!gd->fdt_blob)
+ return 0;
+
+ off = fdt_path_offset(gd->fdt_blob, "ethernet1");
+ if (off < 0)
+ return 0;
+
+ status = fdt_getprop(gd->fdt_blob, off, "status", NULL);
+ return status && (strcmp(status, "okay") == 0);
+}
+
+static void tx28_init_mac(void)
+{
+ int ret;
+
+ ret = fec_get_mac_addr(0);
+ if (ret < 0) {
+ printf("Failed to read FEC0 MAC address from OCOTP\n");
+ return;
+ }
+#ifdef CONFIG_TX28_S
+ if (tx28_fec1_enabled()) {
+ ret = fec_get_mac_addr(1);
+ if (ret < 0) {
+ printf("Failed to read FEC1 MAC address from OCOTP\n");
+ return;
+ }
+ }
+#endif
+}
+#else
+static inline void tx28_init_mac(void)
+{
+}
#endif /* CONFIG_GET_FEC_MAC_ADDR_FROM_IIM */
static const iomux_cfg_t tx28_fec_pads[] = {
return ret;
}
-#ifdef CONFIG_FEC_MXC_MULTI
+#ifndef CONFIG_TX28_S
if (getenv("ethaddr")) {
ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
if (ret) {
#endif
return 0;
}
+#else
+static inline void tx28_init_mac(void)
+{
+}
#endif /* CONFIG_FEC_MXC */
enum {
};
#ifdef CONFIG_LCD
-static ushort tx28_cmap[256];
vidinfo_t panel_info = {
/* set to max. size supported by SoC */
.vl_col = 1600,
.vl_row = 1200,
.vl_bpix = LCD_COLOR32, /* Bits per pixel, 0: 1bpp, 1: 2bpp, 2: 4bpp, 3: 8bpp ... */
- .cmap = tx28_cmap,
};
static struct fb_videomode tx28_fb_modes[] = {
{ TX28_LCD_BACKLIGHT_GPIO, GPIOFLAG_OUTPUT_INIT_HIGH, "LCD BACKLIGHT", },
};
-extern void video_hw_init(void *lcdbase);
-
void lcd_ctrl_init(void *lcdbase)
{
int color_depth = 24;
setenv("videomode", vmode);
debug("Initializing LCD controller\n");
- video_hw_init(lcdbase);
+ video_hw_init();
setenv("videomode", NULL);
} else {
debug("Skipping initialization of LCD controller\n");
mxs_iomux_setup_pad(STK5_CAN_XCVR_GPIO);
}
-int tx28_fec1_enabled(void)
-{
- const char *status;
- int off;
-
- if (!gd->fdt_blob)
- return 0;
-
- off = fdt_path_offset(gd->fdt_blob, "ethernet1");
- if (off < 0)
- return 0;
-
- status = fdt_getprop(gd->fdt_blob, off, "status", NULL);
- return status && (strcmp(status, "okay") == 0);
-}
-
-static void tx28_init_mac(void)
-{
- int ret;
-
- ret = fec_get_mac_addr(0);
- if (ret < 0) {
- printf("Failed to read FEC0 MAC address from OCOTP\n");
- return;
- }
-#ifdef CONFIG_FEC_MXC_MULTI
- if (tx28_fec1_enabled()) {
- ret = fec_get_mac_addr(1);
- if (ret < 0) {
- printf("Failed to read FEC1 MAC address from OCOTP\n");
- return;
- }
- }
-#endif
-}
-
int board_late_init(void)
{
int ret = 0;
} else {
printf("WARNING: Unsupported baseboard: '%s'\n",
baseboard);
- ret = -EINVAL;
+ if (!had_ctrlc())
+ ret = -EINVAL;
}
exit:
const char *dlm = "";
printf("Board: Ka-Ro TX28-4%sx%d\n", TX28_MOD_SUFFIX,
- CONFIG_SDRAM_SIZE / SZ_128M +
+ CONFIG_SYS_SDRAM_SIZE / SZ_128M +
CONFIG_SYS_NAND_BLOCKS / 2048 * 2);
printf("POWERUP Source: ");
karo_fdt_enable_node(blob, "stk5led", 0);
fdt_fixup_mtdparts(blob, tx28_nand_nodes, ARRAY_SIZE(tx28_nand_nodes));
- fdt_fixup_ethernet(blob);
karo_fdt_fixup_touchpanel(blob, tx28_touchpanels,
ARRAY_SIZE(tx28_touchpanels));