karo: tx6ul: add pad settings for FT5x06 and USB pads on STK5

[karo-tx-uboot.git] / board / karo / tx6 / tx6ul.c

diff --git a/board/karo/tx6/tx6ul.c b/board/karo/tx6/tx6ul.c
index d8595b23b27d55e6b53866f4ee6d59d34a6d8097..6a21c3b1b8a5997fd72a3a94e215b04ff17e4d8c 100644 (file)
--- a/board/karo/tx6/tx6ul.c
+++ b/board/karo/tx6/tx6ul.c
@@ -693,20 +693,19 @@ static const iomux_v3_cfg_t stk5_pads[] = {
 
        /* TSC200x PEN IRQ */
        MX6_PAD_JTAG_TMS__GPIO1_IO11 | MUX_PAD_CTRL(TX6_GPIO_IN_PAD_CTRL),
-#if 0
+
        /* EDT-FT5x06 Polytouch panel */
-       MX6_PAD_NAND_CS2__GPIO6_IO15 | MUX_PAD_CTRL(TX6_GPIO_IN_PAD_CTRL), /* IRQ */
-       MX6_PAD_EIM_A16__GPIO2_IO22 | MUX_PAD_CTRL(TX6_GPIO_OUT_PAD_CTRL), /* RESET */
-       MX6_PAD_EIM_A17__GPIO2_IO21 | MUX_PAD_CTRL(TX6_GPIO_OUT_PAD_CTRL), /* WAKE */
+       MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(TX6_GPIO_IN_PAD_CTRL), /* IRQ */
+       MX6_PAD_SNVS_TAMPER3__GPIO5_IO03 | MUX_PAD_CTRL(TX6_GPIO_OUT_PAD_CTRL), /* RESET */
+       MX6_PAD_SNVS_TAMPER8__GPIO5_IO08 | MUX_PAD_CTRL(TX6_GPIO_OUT_PAD_CTRL), /* WAKE */
 
        /* USBH1 */
-       MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(TX6_GPIO_OUT_PAD_CTRL), /* VBUSEN */
-       MX6_PAD_EIM_D30__GPIO3_IO30 | MUX_PAD_CTRL(TX6_GPIO_IN_PAD_CTRL), /* OC */
+       MX6_PAD_GPIO1_IO02__USB_OTG2_PWR | MUX_PAD_CTRL(TX6_GPIO_OUT_PAD_CTRL), /* VBUSEN */
+       MX6_PAD_GPIO1_IO03__USB_OTG2_OC | MUX_PAD_CTRL(TX6_GPIO_IN_PAD_CTRL), /* OC */
+
        /* USBOTG */
-       MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(TX6_GPIO_IN_PAD_CTRL), /* USBOTG ID */
-       MX6_PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(TX6_GPIO_OUT_PAD_CTRL), /* VBUSEN */
-       MX6_PAD_GPIO_8__GPIO1_IO08 | MUX_PAD_CTRL(TX6_GPIO_IN_PAD_CTRL), /* OC */
-#endif
+       MX6_PAD_UART3_CTS_B__GPIO1_IO26 | MUX_PAD_CTRL(TX6_GPIO_OUT_PAD_CTRL), /* VBUSEN */
+       MX6_PAD_UART3_RTS_B__GPIO1_IO27 | MUX_PAD_CTRL(TX6_GPIO_IN_PAD_CTRL), /* OC */
 };
 
 static const struct gpio stk5_gpios[] = {
@@ -1294,6 +1293,15 @@ int board_late_init(void)
                        printf("WARNING: Unsupported STK5 board rev.: %s\n",
                                baseboard + 4);
                }
+       } else if (strncmp(baseboard, "ulmb-", 5) == 0) {
+                       const char *otg_mode = getenv("otg_mode");
+
+                       if (otg_mode && strcmp(otg_mode, "host") == 0) {
+                               printf("otg_mode='%s' is incompatible with baseboard %s; setting to 'none'\n",
+                                       otg_mode, baseboard);
+                               setenv("otg_mode", "none");
+                       }
+                       stk5_board_init();
        } else {
                printf("WARNING: Unsupported baseboard: '%s'\n",
                        baseboard);