#include <asm/arch/dram.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
-#include <asm/arch/usbc.h>
+#include <asm/arch/usb_phy.h>
+#include <asm/gpio.h>
#include <asm/io.h>
-#include <linux/usb/musb.h>
#include <net.h>
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
int soft_i2c_gpio_sda;
int soft_i2c_gpio_scl;
+
+static int soft_i2c_board_init(void)
+{
+ int ret;
+
+ soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
+ if (soft_i2c_gpio_sda < 0) {
+ printf("Error invalid soft i2c sda pin: '%s', err %d\n",
+ CONFIG_VIDEO_LCD_PANEL_I2C_SDA, soft_i2c_gpio_sda);
+ return soft_i2c_gpio_sda;
+ }
+ ret = gpio_request(soft_i2c_gpio_sda, "soft-i2c-sda");
+ if (ret) {
+ printf("Error requesting soft i2c sda pin: '%s', err %d\n",
+ CONFIG_VIDEO_LCD_PANEL_I2C_SDA, ret);
+ return ret;
+ }
+
+ soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
+ if (soft_i2c_gpio_scl < 0) {
+ printf("Error invalid soft i2c scl pin: '%s', err %d\n",
+ CONFIG_VIDEO_LCD_PANEL_I2C_SCL, soft_i2c_gpio_scl);
+ return soft_i2c_gpio_scl;
+ }
+ ret = gpio_request(soft_i2c_gpio_scl, "soft-i2c-scl");
+ if (ret) {
+ printf("Error requesting soft i2c scl pin: '%s', err %d\n",
+ CONFIG_VIDEO_LCD_PANEL_I2C_SCL, ret);
+ return ret;
+ }
+
+ return 0;
+}
+#else
+static int soft_i2c_board_init(void) { return 0; }
#endif
DECLARE_GLOBAL_DATA_PTR;
/* add board specific code here */
int board_init(void)
{
- int id_pfr1;
+ int id_pfr1, ret;
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
}
- return 0;
+ ret = axp_gpio_init();
+ if (ret)
+ return ret;
+
+ /* Uses dm gpio code so do this here and not in i2c_init_board() */
+ return soft_i2c_board_init();
}
int dram_init(void)
return 0;
}
+#if defined(CONFIG_SPL_NAND_SUNXI) && defined(CONFIG_SPL_BUILD)
+static void nand_pinmux_setup(void)
+{
+ unsigned int pin;
+ for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(6); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
+
+ for (pin = SUNXI_GPC(8); pin <= SUNXI_GPC(22); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_NAND);
+}
+
+static void nand_clock_setup(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ setbits_le32(&ccm->ahb_gate0, (CLK_GATE_OPEN << AHB_GATE_OFFSET_NAND0));
+ setbits_le32(&ccm->nand0_clk_cfg, CCM_NAND_CTRL_ENABLE | AHB_DIV_1);
+}
+#endif
+
#ifdef CONFIG_GENERIC_MMC
static void mmc_pinmux_setup(int sdc)
{
return -1;
#endif
-#if CONFIG_MMC_SUNXI_SLOT == 0 && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
+#if !defined(CONFIG_SPL_BUILD) && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
/*
- * Both mmc0 and mmc2 are bootable, figure out where we're booting
- * from. Try mmc0 first, just like the brom does.
+ * On systems with an emmc (mmc2), figure out if we are booting from
+ * the emmc and if we are make it "mmc dev 0" so that boot.scr, etc.
+ * are searched there first. Note we only do this for u-boot proper,
+ * not for the SPL, see spl_boot_device().
*/
- if (mmc_getcd(mmc0) && mmc_init(mmc0) == 0 &&
- mmc0->block_dev.block_read(0, 16, 1, buf) == 1) {
- buf[12] = 0;
- if (strcmp(&buf[4], "eGON.BT0") == 0)
- return 0;
+ if (!sunxi_mmc_has_egon_boot_signature(mmc0) &&
+ sunxi_mmc_has_egon_boot_signature(mmc1)) {
+ /* Booting from emmc / mmc2, swap */
+ mmc0->block_dev.dev = 1;
+ mmc1->block_dev.dev = 0;
}
-
- /* no bootable card in mmc0, so we must be booting from mmc2, swap */
- mmc0->block_dev.dev = 1;
- mmc1->block_dev.dev = 0;
#endif
return 0;
void i2c_init_board(void)
{
- sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB_TWI0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB_TWI0);
+#ifdef CONFIG_I2C0_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
clock_twi_onoff(0, 1);
-#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
- soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
- soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
+#elif defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
+ clock_twi_onoff(0, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
+ clock_twi_onoff(0, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C1_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
+ clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(15), SUN5I_GPB_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(16), SUN5I_GPB_TWI1);
+ clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
+ clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
+ clock_twi_onoff(1, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C2_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
+ clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(17), SUN5I_GPB_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN5I_GPB_TWI2);
+ clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
+ clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
+ clock_twi_onoff(2, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C3_ENABLE
+#if defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
+ clock_twi_onoff(3, 1);
+#elif defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
+ clock_twi_onoff(3, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C4_ENABLE
+#if defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
+ clock_twi_onoff(4, 1);
+#endif
#endif
}
#ifdef CONFIG_AXP221_POWER
power_failed = axp221_init();
power_failed |= axp221_set_dcdc1(CONFIG_AXP221_DCDC1_VOLT);
- power_failed |= axp221_set_dcdc2(1200); /* A31:VDD-GPU, A23:VDD-SYS */
+ power_failed |= axp221_set_dcdc2(CONFIG_AXP221_DCDC2_VOLT);
power_failed |= axp221_set_dcdc3(1200); /* VDD-CPU */
#ifdef CONFIG_MACH_SUN6I
power_failed |= axp221_set_dcdc4(1200); /* A31:VDD-SYS */
power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT);
#endif
+#ifdef CONFIG_SPL_NAND_SUNXI
+ nand_pinmux_setup();
+ nand_clock_setup();
+#endif
+
printf("DRAM:");
ramsize = sunxi_dram_init();
printf(" %lu MiB\n", ramsize >> 20);
}
#endif
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
-static struct musb_hdrc_config musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 6,
- .ram_bits = 11,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
- .mode = MUSB_HOST,
-#else
- .mode = MUSB_PERIPHERAL,
-#endif
- .config = &musb_config,
- .power = 250,
- .platform_ops = &sunxi_musb_ops,
-};
-#endif
-
#ifdef CONFIG_USB_GADGET
int g_dnl_board_usb_cable_connected(void)
{
- return sunxi_usbc_vbus_detect(0);
+ return sunxi_usb_phy_vbus_detect(0);
+}
+#endif
+
+#ifdef CONFIG_SERIAL_TAG
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+ char *serial_string;
+ unsigned long long serial;
+
+ serial_string = getenv("serial#");
+
+ if (serial_string) {
+ serial = simple_strtoull(serial_string, NULL, 16);
+
+ serialnr->high = (unsigned int) (serial >> 32);
+ serialnr->low = (unsigned int) (serial & 0xffffffff);
+ } else {
+ serialnr->high = 0;
+ serialnr->low = 0;
+ }
}
#endif
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
+ char serial_string[17] = { 0 };
unsigned int sid[4];
+ uint8_t mac_addr[6];
+ int ret;
+
+ ret = sunxi_get_sid(sid);
+ if (ret == 0 && sid[0] != 0 && sid[3] != 0) {
+ if (!getenv("ethaddr")) {
+ /* Non OUI / registered MAC address */
+ mac_addr[0] = 0x02;
+ mac_addr[1] = (sid[0] >> 0) & 0xff;
+ mac_addr[2] = (sid[3] >> 24) & 0xff;
+ mac_addr[3] = (sid[3] >> 16) & 0xff;
+ mac_addr[4] = (sid[3] >> 8) & 0xff;
+ mac_addr[5] = (sid[3] >> 0) & 0xff;
+
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
- if (!getenv("ethaddr") && sunxi_get_sid(sid) == 0 &&
- sid[0] != 0 && sid[3] != 0) {
- uint8_t mac_addr[6];
-
- mac_addr[0] = 0x02; /* Non OUI / registered MAC address */
- mac_addr[1] = (sid[0] >> 0) & 0xff;
- mac_addr[2] = (sid[3] >> 24) & 0xff;
- mac_addr[3] = (sid[3] >> 16) & 0xff;
- mac_addr[4] = (sid[3] >> 8) & 0xff;
- mac_addr[5] = (sid[3] >> 0) & 0xff;
+ if (!getenv("serial#")) {
+ snprintf(serial_string, sizeof(serial_string),
+ "%08x%08x", sid[0], sid[3]);
- eth_setenv_enetaddr("ethaddr", mac_addr);
+ setenv("serial#", serial_string);
+ }
}
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
- musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
+#ifndef CONFIG_MACH_SUN9I
+ ret = sunxi_usb_phy_probe();
+ if (ret)
+ return ret;
#endif
+ sunxi_musb_board_init();
+
return 0;
}
#endif
projects / karo-tx-uboot.git / blobdiff