*/
#include <common.h>
+#include <mmc.h>
+#ifdef CONFIG_AXP152_POWER
+#include <axp152.h>
+#endif
+#ifdef CONFIG_AXP209_POWER
+#include <axp209.h>
+#endif
+#ifdef CONFIG_AXP221_POWER
+#include <axp221.h>
+#endif
#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/display.h>
#include <asm/arch/dram.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/usb_phy.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <net.h>
+
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
+int soft_i2c_gpio_sda;
+int soft_i2c_gpio_scl;
+
+static int soft_i2c_board_init(void)
+{
+ int ret;
+
+ soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
+ if (soft_i2c_gpio_sda < 0) {
+ printf("Error invalid soft i2c sda pin: '%s', err %d\n",
+ CONFIG_VIDEO_LCD_PANEL_I2C_SDA, soft_i2c_gpio_sda);
+ return soft_i2c_gpio_sda;
+ }
+ ret = gpio_request(soft_i2c_gpio_sda, "soft-i2c-sda");
+ if (ret) {
+ printf("Error requesting soft i2c sda pin: '%s', err %d\n",
+ CONFIG_VIDEO_LCD_PANEL_I2C_SDA, ret);
+ return ret;
+ }
+
+ soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
+ if (soft_i2c_gpio_scl < 0) {
+ printf("Error invalid soft i2c scl pin: '%s', err %d\n",
+ CONFIG_VIDEO_LCD_PANEL_I2C_SCL, soft_i2c_gpio_scl);
+ return soft_i2c_gpio_scl;
+ }
+ ret = gpio_request(soft_i2c_gpio_scl, "soft-i2c-scl");
+ if (ret) {
+ printf("Error requesting soft i2c scl pin: '%s', err %d\n",
+ CONFIG_VIDEO_LCD_PANEL_I2C_SCL, ret);
+ return ret;
+ }
+
+ return 0;
+}
+#else
+static int soft_i2c_board_init(void) { return 0; }
+#endif
DECLARE_GLOBAL_DATA_PTR;
/* add board specific code here */
int board_init(void)
{
- int id_pfr1;
+ int id_pfr1, ret;
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
}
- return 0;
+ ret = axp_gpio_init();
+ if (ret)
+ return ret;
+
+ /* Uses dm gpio code so do this here and not in i2c_init_board() */
+ return soft_i2c_board_init();
}
int dram_init(void)
return 0;
}
+#if defined(CONFIG_SPL_NAND_SUNXI) && defined(CONFIG_SPL_BUILD)
+static void nand_pinmux_setup(void)
+{
+ unsigned int pin;
+ for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(6); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
+
+ for (pin = SUNXI_GPC(8); pin <= SUNXI_GPC(22); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_NAND);
+}
+
+static void nand_clock_setup(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ setbits_le32(&ccm->ahb_gate0, (CLK_GATE_OPEN << AHB_GATE_OFFSET_NAND0));
+ setbits_le32(&ccm->nand0_clk_cfg, CCM_NAND_CTRL_ENABLE | AHB_DIV_1);
+}
+#endif
+
#ifdef CONFIG_GENERIC_MMC
static void mmc_pinmux_setup(int sdc)
{
unsigned int pin;
+ __maybe_unused int pins;
switch (sdc) {
case 0:
- /* D1-PF0, D0-PF1, CLK-PF2, CMD-PF3, D3-PF4, D4-PF5 */
+ /* SDC0: PF0-PF5 */
for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUNXI_GPF0_SDC0);
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPF_SDC0);
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
break;
case 1:
- /* CMD-PH22, CLK-PH23, D0~D3-PH24~27 : 5 */
- for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUN4I_GPH22_SDC1);
+ pins = sunxi_name_to_gpio_bank(CONFIG_MMC1_PINS);
+
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ if (pins == SUNXI_GPIO_H) {
+ /* SDC1: PH22-PH-27 */
+ for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN4I_GPH_SDC1);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+ } else {
+ /* SDC1: PG0-PG5 */
+ for (pin = SUNXI_GPG(0); pin <= SUNXI_GPG(5); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN4I_GPG_SDC1);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+ }
+#elif defined(CONFIG_MACH_SUN5I)
+ /* SDC1: PG3-PG8 */
+ for (pin = SUNXI_GPG(3); pin <= SUNXI_GPG(8); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN5I_GPG_SDC1);
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
+#elif defined(CONFIG_MACH_SUN6I)
+ /* SDC1: PG0-PG5 */
+ for (pin = SUNXI_GPG(0); pin <= SUNXI_GPG(5); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPG_SDC1);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+#elif defined(CONFIG_MACH_SUN8I)
+ if (pins == SUNXI_GPIO_D) {
+ /* SDC1: PD2-PD7 */
+ for (pin = SUNXI_GPD(2); pin <= SUNXI_GPD(7); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN8I_GPD_SDC1);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+ } else {
+ /* SDC1: PG0-PG5 */
+ for (pin = SUNXI_GPG(0); pin <= SUNXI_GPG(5); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN8I_GPG_SDC1);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+ }
+#endif
break;
case 2:
- /* CMD-PC6, CLK-PC7, D0-PC8, D1-PC9, D2-PC10, D3-PC11 */
+ pins = sunxi_name_to_gpio_bank(CONFIG_MMC2_PINS);
+
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ /* SDC2: PC6-PC11 */
for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUNXI_GPC6_SDC2);
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+#elif defined(CONFIG_MACH_SUN5I)
+ if (pins == SUNXI_GPIO_E) {
+ /* SDC2: PE4-PE9 */
+ for (pin = SUNXI_GPE(4); pin <= SUNXI_GPD(9); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN5I_GPE_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+ } else {
+ /* SDC2: PC6-PC15 */
+ for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+ }
+#elif defined(CONFIG_MACH_SUN6I)
+ if (pins == SUNXI_GPIO_A) {
+ /* SDC2: PA9-PA14 */
+ for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+ } else {
+ /* SDC2: PC6-PC15, PC24 */
+ for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
+ }
+#elif defined(CONFIG_MACH_SUN8I)
+ /* SDC2: PC5-PC6, PC8-PC16 */
+ for (pin = SUNXI_GPC(5); pin <= SUNXI_GPC(6); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
+
+ for (pin = SUNXI_GPC(8); pin <= SUNXI_GPC(16); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+#endif
break;
case 3:
- /* CMD-PI4, CLK-PI5, D0~D3-PI6~9 : 2 */
+ pins = sunxi_name_to_gpio_bank(CONFIG_MMC3_PINS);
+
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ /* SDC3: PI4-PI9 */
for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUN4I_GPI4_SDC3);
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPI_SDC3);
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
+#elif defined(CONFIG_MACH_SUN6I)
+ if (pins == SUNXI_GPIO_A) {
+ /* SDC3: PA9-PA14 */
+ for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_SDC3);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+ } else {
+ /* SDC3: PC6-PC15, PC24 */
+ for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPC_SDC3);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUN6I_GPC_SDC3);
+ sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
+ }
+#endif
break;
default:
int board_mmc_init(bd_t *bis)
{
+ __maybe_unused struct mmc *mmc0, *mmc1;
+ __maybe_unused char buf[512];
+
mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT);
- sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
-#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA)
+ mmc0 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
+ if (!mmc0)
+ return -1;
+
+#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA);
- sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
+ mmc1 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
+ if (!mmc1)
+ return -1;
+#endif
+
+#if !defined(CONFIG_SPL_BUILD) && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
+ /*
+ * On systems with an emmc (mmc2), figure out if we are booting from
+ * the emmc and if we are make it "mmc dev 0" so that boot.scr, etc.
+ * are searched there first. Note we only do this for u-boot proper,
+ * not for the SPL, see spl_boot_device().
+ */
+ if (!sunxi_mmc_has_egon_boot_signature(mmc0) &&
+ sunxi_mmc_has_egon_boot_signature(mmc1)) {
+ /* Booting from emmc / mmc2, swap */
+ mmc0->block_dev.dev = 1;
+ mmc1->block_dev.dev = 0;
+ }
#endif
return 0;
}
#endif
+void i2c_init_board(void)
+{
+#ifdef CONFIG_I2C0_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
+ clock_twi_onoff(0, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
+ clock_twi_onoff(0, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
+ clock_twi_onoff(0, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C1_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
+ clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(15), SUN5I_GPB_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(16), SUN5I_GPB_TWI1);
+ clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
+ clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
+ clock_twi_onoff(1, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C2_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
+ clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(17), SUN5I_GPB_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN5I_GPB_TWI2);
+ clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
+ clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
+ clock_twi_onoff(2, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C3_ENABLE
+#if defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
+ clock_twi_onoff(3, 1);
+#elif defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
+ clock_twi_onoff(3, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C4_ENABLE
+#if defined(CONFIG_MACH_SUN7I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
+ clock_twi_onoff(4, 1);
+#endif
+#endif
+}
+
#ifdef CONFIG_SPL_BUILD
void sunxi_board_init(void)
{
+ int power_failed = 0;
unsigned long ramsize;
+#ifdef CONFIG_AXP152_POWER
+ power_failed = axp152_init();
+ power_failed |= axp152_set_dcdc2(1400);
+ power_failed |= axp152_set_dcdc3(1500);
+ power_failed |= axp152_set_dcdc4(1250);
+ power_failed |= axp152_set_ldo2(3000);
+#endif
+#ifdef CONFIG_AXP209_POWER
+ power_failed |= axp209_init();
+ power_failed |= axp209_set_dcdc2(1400);
+ power_failed |= axp209_set_dcdc3(1250);
+ power_failed |= axp209_set_ldo2(3000);
+ power_failed |= axp209_set_ldo3(2800);
+ power_failed |= axp209_set_ldo4(2800);
+#endif
+#ifdef CONFIG_AXP221_POWER
+ power_failed = axp221_init();
+ power_failed |= axp221_set_dcdc1(CONFIG_AXP221_DCDC1_VOLT);
+ power_failed |= axp221_set_dcdc2(CONFIG_AXP221_DCDC2_VOLT);
+ power_failed |= axp221_set_dcdc3(1200); /* VDD-CPU */
+#ifdef CONFIG_MACH_SUN6I
+ power_failed |= axp221_set_dcdc4(1200); /* A31:VDD-SYS */
+#else
+ power_failed |= axp221_set_dcdc4(0); /* A23:unused */
+#endif
+ power_failed |= axp221_set_dcdc5(1500); /* VCC-DRAM */
+ power_failed |= axp221_set_dldo1(CONFIG_AXP221_DLDO1_VOLT);
+ power_failed |= axp221_set_dldo4(CONFIG_AXP221_DLDO4_VOLT);
+ power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT);
+ power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT);
+ power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT);
+ power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT);
+#endif
+
+#ifdef CONFIG_SPL_NAND_SUNXI
+ nand_pinmux_setup();
+ nand_clock_setup();
+#endif
+
printf("DRAM:");
ramsize = sunxi_dram_init();
printf(" %lu MiB\n", ramsize >> 20);
if (!ramsize)
hang();
+
+ /*
+ * Only clock up the CPU to full speed if we are reasonably
+ * assured it's being powered with suitable core voltage
+ */
+ if (!power_failed)
+ clock_set_pll1(CONFIG_SYS_CLK_FREQ);
+ else
+ printf("Failed to set core voltage! Can't set CPU frequency\n");
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET
+int g_dnl_board_usb_cable_connected(void)
+{
+ return sunxi_usb_phy_vbus_detect(0);
+}
+#endif
+
+#ifdef CONFIG_SERIAL_TAG
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+ char *serial_string;
+ unsigned long long serial;
+
+ serial_string = getenv("serial#");
+
+ if (serial_string) {
+ serial = simple_strtoull(serial_string, NULL, 16);
+
+ serialnr->high = (unsigned int) (serial >> 32);
+ serialnr->low = (unsigned int) (serial & 0xffffffff);
+ } else {
+ serialnr->high = 0;
+ serialnr->low = 0;
+ }
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ char serial_string[17] = { 0 };
+ unsigned int sid[4];
+ uint8_t mac_addr[6];
+ int ret;
+
+ ret = sunxi_get_sid(sid);
+ if (ret == 0 && sid[0] != 0 && sid[3] != 0) {
+ if (!getenv("ethaddr")) {
+ /* Non OUI / registered MAC address */
+ mac_addr[0] = 0x02;
+ mac_addr[1] = (sid[0] >> 0) & 0xff;
+ mac_addr[2] = (sid[3] >> 24) & 0xff;
+ mac_addr[3] = (sid[3] >> 16) & 0xff;
+ mac_addr[4] = (sid[3] >> 8) & 0xff;
+ mac_addr[5] = (sid[3] >> 0) & 0xff;
+
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
+
+ if (!getenv("serial#")) {
+ snprintf(serial_string, sizeof(serial_string),
+ "%08x%08x", sid[0], sid[3]);
+
+ setenv("serial#", serial_string);
+ }
+ }
+
+#ifndef CONFIG_MACH_SUN9I
+ ret = sunxi_usb_phy_probe();
+ if (ret)
+ return ret;
+#endif
+ sunxi_musb_board_init();
+
+ return 0;
}
#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_VIDEO_DT_SIMPLEFB
+ return sunxi_simplefb_setup(blob);
+#endif
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
projects / karo-tx-uboot.git / blobdiff