return !strncmp(header.config, "SKU#02", 6);
}
-static int board_is_gp_evm(void)
+static int __maybe_unused board_is_gp_evm(void)
{
return !strncmp("A33515BB", header.name, 8);
}
static void rtc32k_enable(void)
{
- struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE;
+ struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
.datadldiff0 = PHY_DLL_LOCK_DIFF,
};
+static const struct ddr_data ddr3_beagleblack_data = {
+ .datardsratio0 = MT41K256M16HA125E_RD_DQS,
+ .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+ .datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
static const struct ddr_data ddr3_evm_data = {
.datardsratio0 = MT41J512M8RH125_RD_DQS,
.datawdsratio0 = MT41J512M8RH125_WR_DQS,
.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
};
+static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = {
+ .cmd0csratio = MT41K256M16HA125E_RATIO,
+ .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
+ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd1csratio = MT41K256M16HA125E_RATIO,
+ .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
+ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd2csratio = MT41K256M16HA125E_RATIO,
+ .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
+ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+
static const struct cmd_control ddr3_evm_cmd_ctrl_data = {
.cmd0csratio = MT41J512M8RH125_RATIO,
.cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
.sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
.zq_config = MT41J128MJT125_ZQ_CFG,
- .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY,
+ .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
+ PHY_EN_DYN_PWRDN,
+};
+
+static struct emif_regs ddr3_beagleblack_emif_reg_data = {
+ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+ .zq_config = MT41K256M16HA125E_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
};
static struct emif_regs ddr3_evm_emif_reg_data = {
.sdram_tim2 = MT41J512M8RH125_EMIF_TIM2,
.sdram_tim3 = MT41J512M8RH125_EMIF_TIM3,
.zq_config = MT41J512M8RH125_ZQ_CFG,
- .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY,
+ .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY |
+ PHY_EN_DYN_PWRDN,
};
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ return (serial_tstc() && serial_getc() == 'c');
+}
+#endif
+
#endif
/*
*/
void s_init(void)
{
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
+
/* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
gpio_direction_output(GPIO_DDR_VTT_EN, 1);
}
- if (board_is_evm_sk() || board_is_bone_lt())
+ if (board_is_evm_sk())
config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
- &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data);
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+ else if (board_is_bone_lt())
+ config_ddr(400, MT41K256M16HA125E_IOCTRL_VALUE,
+ &ddr3_beagleblack_data,
+ &ddr3_beagleblack_cmd_ctrl_data,
+ &ddr3_beagleblack_emif_reg_data, 0);
else if (board_is_evm_15_or_later())
config_ddr(303, MT41J512M8RH125_IOCTRL_VALUE, &ddr3_evm_data,
- &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data);
+ &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0);
else
config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data,
- &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data);
+ &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
#endif
}
}
#endif
-#ifdef CONFIG_DRIVER_TI_CPSW
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
static void cpsw_control(int enabled)
{
/* VTP can be added here */
};
static struct cpsw_platform_data cpsw_data = {
- .mdio_base = AM335X_CPSW_MDIO_BASE,
- .cpsw_base = AM335X_CPSW_BASE,
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
.mdio_div = 0xff,
.channels = 8,
.cpdma_reg_ofs = 0x800,
int board_eth_init(bd_t *bis)
{
int rv, n = 0;
-#ifdef CONFIG_DRIVER_TI_CPSW
uint8_t mac_addr[6];
uint32_t mac_hi, mac_lo;
- if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
- printf("<ethaddr> not set. Reading from E-fuse\n");
- /* try reading mac address from efuse */
- mac_lo = readl(&cdev->macid0l);
- mac_hi = readl(&cdev->macid0h);
- mac_addr[0] = mac_hi & 0xFF;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
- mac_addr[4] = mac_lo & 0xFF;
- mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+ /* try reading mac address from efuse */
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+ if (!getenv("ethaddr")) {
+ printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ether_addr(mac_addr))
eth_setenv_enetaddr("ethaddr", mac_addr);
- else
- goto try_usbether;
}
+#ifdef CONFIG_DRIVER_TI_CPSW
if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
writel(MII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
printf("Error %d registering CPSW switch\n", rv);
else
n += rv;
+#endif
/*
*
AR8051_RGMII_TX_CLK_DLY);
}
#endif
-try_usbether:
-#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_USB_ETHER) && \
+ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("usbnet_devaddr", mac_addr);
+
rv = usb_eth_initialize(bis);
if (rv < 0)
printf("Error %d registering USB_ETHER\n", rv);
projects / karo-tx-uboot.git / blobdiff