ulong monitor_flash_len;
-int __board_flash_wp_on(void)
+__weak int board_flash_wp_on(void)
{
/*
* Most flashes can't be detected when write protection is enabled,
return 0;
}
-int board_flash_wp_on(void)
- __attribute__ ((weak, alias("__board_flash_wp_on")));
-
-void __cpu_secondary_init_r(void)
+__weak void cpu_secondary_init_r(void)
{
}
-void cpu_secondary_init_r(void)
- __attribute__ ((weak, alias("__cpu_secondary_init_r")));
-
static int initr_secondary_cpu(void)
{
/*
static int initr_reloc(void)
{
- gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+ /* tell others: relocation done */
+ gd->flags |= GD_FLG_RELOC | GD_FLG_FULL_MALLOC_INIT;
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
return 0;
{
#ifdef __ARM__
monitor_flash_len = _end - __image_copy_start;
-#elif !defined(CONFIG_SANDBOX)
+#elif !defined(CONFIG_SANDBOX) && !defined(CONFIG_NIOS2)
monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
#endif
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
{
ulong malloc_start;
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+ debug("Pre-reloc malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
+ gd->malloc_ptr / 1024);
+#endif
/* The malloc area is immediately below the monitor copy in DRAM */
malloc_start = gd->relocaddr - TOTAL_MALLOC_LEN;
mem_malloc_init((ulong)map_sysmem(malloc_start, TOTAL_MALLOC_LEN),
return 0;
}
-#ifdef CONFIG_DM
-static int initr_dm(void)
+#ifdef CONFIG_SYS_NONCACHED_MEMORY
+static int initr_noncached(void)
{
- int ret;
-
- ret = dm_init();
- if (ret) {
- debug("dm_init() failed: %d\n", ret);
- return ret;
- }
- ret = dm_scan_platdata();
- if (ret) {
- debug("dm_scan_platdata() failed: %d\n", ret);
- return ret;
- }
-#ifdef CONFIG_OF_CONTROL
- ret = dm_scan_fdt(gd->fdt_blob);
- if (ret) {
- debug("dm_scan_fdt() failed: %d\n", ret);
- return ret;
- }
+ noncached_init();
+ return 0;
+}
#endif
- return 0;
+#ifdef CONFIG_DM
+static int initr_dm(void)
+{
+ /* Save the pre-reloc driver model and start a new one */
+ gd->dm_root_f = gd->dm_root;
+ gd->dm_root = NULL;
+ return dm_init_and_scan(false);
}
#endif
return 0;
}
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+static int initr_manual_reloc_cmdtable(void)
+{
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
+ return 0;
+}
+#endif
+
#if !defined(CONFIG_SYS_NO_FLASH)
static int initr_flash(void)
{
ulong flash_size = 0;
bd_t *bd = gd->bd;
- int ok;
puts("Flash: ");
- if (board_flash_wp_on()) {
+ if (board_flash_wp_on())
printf("Uninitialized - Write Protect On\n");
- /* Since WP is on, we can't find real size. Set to 0 */
- ok = 1;
- } else {
+ else
flash_size = flash_init();
- ok = flash_size > 0;
- }
- if (!ok) {
- puts("*** failed ***\n");
-#ifdef CONFIG_PPC
- /* Why does PPC do this? */
- hang();
-#endif
- return -1;
- }
+
print_size(flash_size, "");
#ifdef CONFIG_SYS_FLASH_CHECKSUM
/*
}
#endif
-#ifdef CONFIG_PPC
+#if defined(CONFIG_PPC) && !defined(CONFIG_DM_SPI)
static int initr_spi(void)
{
/* PPC does this here */
#ifdef CONFIG_CMD_NAND
/* go init the NAND */
-int initr_nand(void)
+static int initr_nand(void)
{
puts("NAND: ");
nand_init();
#if defined(CONFIG_CMD_ONENAND)
/* go init the NAND */
-int initr_onenand(void)
+static int initr_onenand(void)
{
puts("NAND: ");
onenand_init();
#endif
#ifdef CONFIG_GENERIC_MMC
-int initr_mmc(void)
+static int initr_mmc(void)
{
puts("MMC: ");
mmc_initialize(gd->bd);
#endif
#ifdef CONFIG_HAS_DATAFLASH
-int initr_dataflash(void)
+static int initr_dataflash(void)
{
AT91F_DataflashInit();
dataflash_print_info();
return 0;
}
-#ifdef CONFIG_HERMES
-static int initr_hermes(void)
-{
- if ((gd->board_type >> 16) == 2)
- gd->bd->bi_ethspeed = gd->board_type & 0xFFFF;
- else
- gd->bd->bi_ethspeed = 0xFFFF;
- return 0;
-}
-
-static int initr_hermes_start(void)
-{
- if (gd->bd->bi_ethspeed != 0xFFFF)
- hermes_start_lxt980((int) gd->bd->bi_ethspeed);
- return 0;
-}
-#endif
-
#ifdef CONFIG_SC3
/* TODO: with new initcalls, move this into the driver */
extern void sc3_read_eeprom(void);
}
#endif
-#ifdef CONFIG_DISPLAY_BOARDINFO_LATE
-static int show_model_r(void)
-{
- /* Put this here so it appears on the LCD, now it is ready */
-# ifdef CONFIG_OF_CONTROL
- const char *model;
-
- model = (char *)fdt_getprop(gd->fdt_blob, 0, "model", NULL);
- printf("Model: %s\n", model ? model : "<unknown>");
-# else
- checkboard();
-# endif
- return 0;
-}
-#endif
-
/* enable exceptions */
#ifdef CONFIG_ARM
static int initr_enable_interrupts(void)
#if defined(CONFIG_CMD_SCSI)
static int initr_scsi(void)
{
- /* Not supported properly on ARM yet */
-#ifndef CONFIG_ARM
puts("SCSI: ");
scsi_init();
-#endif
return 0;
}
-#endif /* CONFIG_CMD_NET */
+#endif
#if defined(CONFIG_CMD_DOC)
static int initr_doc(void)
{
puts("DOC: ");
doc_init();
+ return 0;
}
#endif
/* Also take the logbuffer into account (pram is in kB) */
pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
# endif
- sprintf(memsz, "%ldk", (gd->ram_size / 1024) - pram);
+ sprintf(memsz, "%ldk", (long int) ((gd->ram_size / 1024) - pram));
setenv("mem", memsz);
return 0;
/* TODO: could x86/PPC have this also perhaps? */
#ifdef CONFIG_ARM
initr_caches,
+#endif
+ initr_reloc_global_data,
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
+ initr_unlock_ram_in_cache,
+#endif
+ initr_barrier,
+ initr_malloc,
+#ifdef CONFIG_SYS_NONCACHED_MEMORY
+ initr_noncached,
+#endif
+ bootstage_relocate,
+#ifdef CONFIG_DM
+ initr_dm,
+#endif
+#ifdef CONFIG_ARM
board_init, /* Setup chipselects */
#endif
/*
#ifdef CONFIG_CLOCKS
set_cpu_clk_info, /* Setup clock information */
#endif
- initr_reloc_global_data,
+ stdio_init_tables,
initr_serial,
initr_announce,
INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ initr_manual_reloc_cmdtable,
+#endif
#ifdef CONFIG_PPC
initr_trap,
#endif
#ifdef CONFIG_SYS_DELAYED_ICACHE
initr_icache_enable,
#endif
-#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
- initr_unlock_ram_in_cache,
-#endif
#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
/*
* Do early PCI configuration _before_ the flash gets initialised,
#endif
#ifdef CONFIG_WINBOND_83C553
initr_w83c553f,
-#endif
- initr_barrier,
- initr_malloc,
- bootstage_relocate,
-#ifdef CONFIG_DM
- initr_dm,
#endif
#ifdef CONFIG_ARCH_EARLY_INIT_R
arch_early_init_r,
initr_flash,
#endif
INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_PPC) || defined(CONFIG_X86)
+#if defined(CONFIG_PPC)
/* initialize higher level parts of CPU like time base and timers */
cpu_init_r,
#endif
#ifdef CONFIG_SC3
initr_sc3_read_eeprom,
#endif
-#ifdef CONFIG_HERMES
- initr_hermes,
-#endif
#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
mac_read_from_eeprom,
#endif
*/
initr_pci,
#endif
- stdio_init,
+ stdio_add_devices,
initr_jumptable,
#ifdef CONFIG_API
initr_api,
#endif
console_init_r, /* fully init console as a device */
#ifdef CONFIG_DISPLAY_BOARDINFO_LATE
- show_model_r,
+ show_board_info,
#endif
#ifdef CONFIG_ARCH_MISC_INIT
arch_misc_init, /* miscellaneous arch-dependent init */
#endif
#ifdef CONFIG_MISC_INIT_R
misc_init_r, /* miscellaneous platform-dependent init */
-#endif
-#ifdef CONFIG_HERMES
- initr_hermes_start,
#endif
INIT_FUNC_WATCHDOG_RESET
#ifdef CONFIG_CMD_KGDB
initr_kgdb,
-#endif
-#ifdef CONFIG_X86
- board_early_init_r,
#endif
interrupt_init,
-#if defined(CONFIG_ARM) || defined(CONFIG_x86)
+#if defined(CONFIG_ARM)
initr_enable_interrupts,
#endif
#ifdef CONFIG_X86
int i;
#endif
-#ifndef CONFIG_X86
+#if !defined(CONFIG_X86) && !defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
gd = new_gd;
#endif
projects / karo-tx-uboot.git / blobdiff