karo: tx6: set TX6_REV=0x1 where appropriate to eliminate code for unused PMIC chips

[karo-tx-uboot.git] / configs / tx6u-8011_mfg_defconfig

diff --git a/configs/tx6u-8011_mfg_defconfig b/configs/tx6u-8011_mfg_defconfig
index 5e1b5cf478f1ef566e96a6a127350bce4fdcdb88..28f59a402985569a45c6a45c4410b1cefb3944d4 100644 (file)
--- a/configs/tx6u-8011_mfg_defconfig
+++ b/configs/tx6u-8011_mfg_defconfig
@@ -1,28 +1,35 @@
-CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_BUS_WIDTH=32"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_BUS_WIDTH=32,TX6_REV=0x1"
 CONFIG_ARM=y
-CONFIG_SOC_MX6DL=y
+CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TX6=y
 CONFIG_TARGET_TX6U_8011=y
 CONFIG_TX6_UBOOT_MFG=y
-CONFIG_CMD_MII=y
+CONFIG_BOOTP_DNS=y
+CONFIG_BOOTP_GATEWAY=y
+CONFIG_BOOTP_SUBNETMASK=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCE=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_CACHE=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MII=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_PING=y
-CONFIG_BOOTP_SUBNETMASK=y
-CONFIG_BOOTP_GATEWAY=y
-CONFIG_BOOTP_DNS=y
+CONFIG_CMD_TIME=y
+CONFIG_DOS_PARTITION=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_FEC_MXC=y
+CONFIG_FEC_MXC_PHYADDR=0
+CONFIG_IMX_WATCHDOG=y
 CONFIG_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_FSL_USDHC=y
 CONFIG_NET=y
 CONFIG_NETDEVICES=y
-CONFIG_FEC_MXC=y
-CONFIG_IMX_WATCHDOG=y
-CONFIG_CMD_I2C=y
-CONFIG_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_DOS_PARTITION=y
-CONFIG_FEC_MXC_PHYADDR=0
-CONFIG_MXC_OCOTP=y
-CONFIG_CMD_FUSE=y
 CONFIG_PHY_SMSC=y
+CONFIG_SYS_PROMPT="TX6DL U-Boot > "