static inline void *
flash_map (flash_info_t * info, flash_sect_t sect, uint offset)
{
- unsigned int byte_offset = offset * info->portwidth / info->chipwidth;
- unsigned int addr = (info->start[sect] + byte_offset);
- unsigned int mask = 0xffffffff << (info->portwidth - 1);
+ unsigned int byte_offset = offset * info->portwidth;
- return (void *)(addr & mask);
+ return (void *)(info->start[sect] + byte_offset);
}
static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
#endif
flash_write64(cword.ll, addr);
break;
- default:
- printf("fwc: Unknown port width %d\n", info->portwidth);
}
/* Ensure all the instructions are fully finished */
prompt, info->start[sector],
flash_read_long (info, sector, 0));
flash_write_cmd (info, sector, 0, info->cmd_reset);
+ udelay(1);
return ERR_TIMOUT;
}
udelay (1); /* also triggers watchdog */
static flash_sect_t find_sector (flash_info_t * info, ulong addr)
{
static flash_sect_t saved_sector; /* previously found sector */
+ static flash_info_t *saved_info; /* previously used flash bank */
flash_sect_t sector = saved_sector;
+ if ((info != saved_info) || (sector >= info->sector_count))
+ sector = 0;
+
while ((info->start[sector] < addr)
&& (sector < info->sector_count - 1))
sector++;
sector--;
saved_sector = sector;
+ saved_info = info;
return sector;
}
/* Check if Flash is (sufficiently) erased */
switch (info->portwidth) {
case FLASH_CFI_8BIT:
- debug("%s: 8-bit 0x%02x\n", __func__, cword.c);
flag = ((flash_read8(dstaddr) & cword.c) == cword.c);
break;
case FLASH_CFI_16BIT:
- debug("%s: 16-bit 0x%04x\n", __func__, cword.w);
flag = ((flash_read16(dstaddr) & cword.w) == cword.w);
break;
case FLASH_CFI_32BIT:
- debug("%s: 32-bit 0x%08lx\n", __func__, cword.l);
flag = ((flash_read32(dstaddr) & cword.l) == cword.l);
break;
case FLASH_CFI_64BIT:
flash_sect_t sect;
int st;
- debug("%s: erasing sectors %d to %d\n", __func__, s_first, s_last);
-
if (info->flash_id != FLASH_MAN_CFI) {
puts ("Can't erase unknown flash type - aborted\n");
return 1;
rcode = 1;
else if (flash_verbose)
putc ('.');
- } else {
- debug("\nSector %d is protected.\n",
- info->protect[sect]);
}
}
unsigned int i;
for (i = 0; i < len; i++)
- p[i] = flash_read_uchar(info, start + (i * 2));
+ p[i] = flash_read_uchar(info, start + i);
}
static void __flash_cmd_reset(flash_info_t *info)
{
int cfi_offset;
+ /* Issue FLASH reset command */
+ flash_cmd_reset(info);
+
for (cfi_offset=0;
cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint);
cfi_offset++) {
- /* Issue FLASH reset command */
- flash_cmd_reset(info);
flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset],
FLASH_CMD_CFI);
- if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q') &&
- flash_isequal(info, 0,
- FLASH_OFFSET_CFI_RESP + 2, 'R') &&
- flash_isequal(info, 0,
- FLASH_OFFSET_CFI_RESP + 4, 'Y')) {
+ if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
+ && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
+ && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP,
sizeof(struct cfi_qry));
-#ifdef CONFIG_SYS_FLASH_INTERFACE_WIDTH
- info->interface = CONFIG_SYS_FLASH_INTERFACE_WIDTH;
-#else
info->interface = le16_to_cpu(qry->interface_desc);
- /* Some flash chips can support multiple bus widths.
- * In this case, override the interface width and
- * limit it to the port width.
- */
- if ((info->interface == FLASH_CFI_X8X16) &&
- (info->portwidth == FLASH_CFI_8BIT)) {
- debug("Overriding 16-bit interface"
- " width to 8-bit port width.\n");
- info->interface = FLASH_CFI_X8;
- } else if ((info->interface == FLASH_CFI_X16X32) &&
- (info->portwidth == FLASH_CFI_16BIT)) {
- debug("Overriding 16-bit interface"
- " width to 16-bit port width.\n");
- info->interface = FLASH_CFI_X16;
- }
-#endif
+
info->cfi_offset = flash_offset_cfi[cfi_offset];
debug ("device interface is %d\n",
info->interface);
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
/* calculate command offsets as in the Linux driver */
- info->addr_unlock1 = 0xaaa;
- info->addr_unlock2 = 0x555;
+ info->addr_unlock1 = 0x555;
+ info->addr_unlock2 = 0x2aa;
/*
* modify the unlock address if we are
for (info->chipwidth = FLASH_CFI_BY8;
info->chipwidth <= info->portwidth;
info->chipwidth <<= 1)
- if (__flash_detect_cfi(info, qry)) {
- debug("Found CFI flash, portwidth %d,"
- " chipwidth %d\n",
- info->portwidth, info->chipwidth);
+ if (__flash_detect_cfi(info, qry))
return 1;
- }
}
debug ("not found\n");
return 0;
/* CFI < 1.1, try to guess from device id */
if ((info->device_id & 0x80) != 0)
cfi_reverse_geometry(qry);
- } else if (flash_read_uchar(info, info->ext_addr + 0x1e) == 3) {
+ } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
/* CFI >= 1.1, deduct from top/bottom flag */
/* note: ext_addr is valid since cfi_version > 0 */
cfi_reverse_geometry(qry);
if (flash_detect_cfi (info, &qry)) {
info->vendor = le16_to_cpu(qry.p_id);
- info->ext_addr = le16_to_cpu(qry.p_adr) * 2;
- debug("extended address is 0x%x\n", info->ext_addr);
+ info->ext_addr = le16_to_cpu(qry.p_adr);
num_erase_regions = qry.num_erase_regions;
if (info->ext_addr) {
info->cfi_version = (ushort) flash_read_uchar (info,
- info->ext_addr + 6) << 8;
+ info->ext_addr + 3) << 8;
info->cfi_version |= (ushort) flash_read_uchar (info,
- info->ext_addr + 8);
+ info->ext_addr + 4);
}
#ifdef DEBUG
debug ("device id is 0x%x\n", info->device_id);
debug ("device id2 is 0x%x\n", info->device_id2);
debug ("cfi version is 0x%04x\n", info->cfi_version);
- debug("port width: %d, chipwidth: %d, interface: %d\n",
- info->portwidth, info->chipwidth, info->interface);
size_ratio = info->portwidth / info->chipwidth;
/* if the chip is x8/x16 reduce the ratio by half */
projects / karo-tx-uboot.git / blobdiff