static inline void *
flash_map (flash_info_t * info, flash_sect_t sect, uint offset)
{
- unsigned int byte_offset = offset * info->portwidth;
+ unsigned int byte_offset = offset * info->portwidth / info->chipwidth;
+ unsigned int addr = (info->start[sect] + byte_offset);
+ unsigned int mask = 0xffffffff << (info->portwidth - 1);
- return (void *)(info->start[sect] + byte_offset);
+ return (void *)(uintptr_t)(addr & mask);
}
static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
#endif
flash_write64(cword.ll, addr);
break;
+ default:
+ printf("fwc: Unknown port width %d\n", info->portwidth);
}
/* Ensure all the instructions are fully finished */
prompt, info->start[sector],
flash_read_long (info, sector, 0));
flash_write_cmd (info, sector, 0, info->cmd_reset);
- udelay(1);
return ERR_TIMOUT;
}
udelay (1); /* also triggers watchdog */
*/
static flash_sect_t find_sector (flash_info_t * info, ulong addr)
{
- static flash_sect_t saved_sector = 0; /* previously found sector */
- static flash_info_t *saved_info = 0; /* previously used flash bank */
+ static flash_sect_t saved_sector; /* previously found sector */
flash_sect_t sector = saved_sector;
- if ((info != saved_info) || (sector >= info->sector_count))
- sector = 0;
-
while ((info->start[sector] < addr)
&& (sector < info->sector_count - 1))
sector++;
sector--;
saved_sector = sector;
- saved_info = info;
return sector;
}
/* Check if Flash is (sufficiently) erased */
switch (info->portwidth) {
case FLASH_CFI_8BIT:
+ debug("%s: 8-bit 0x%02x\n", __func__, cword.c);
flag = ((flash_read8(dstaddr) & cword.c) == cword.c);
break;
case FLASH_CFI_16BIT:
+ debug("%s: 16-bit 0x%04x\n", __func__, cword.w);
flag = ((flash_read16(dstaddr) & cword.w) == cword.w);
break;
case FLASH_CFI_32BIT:
+ debug("%s: 32-bit 0x%08lx\n", __func__, cword.l);
flag = ((flash_read32(dstaddr) & cword.l) == cword.l);
break;
case FLASH_CFI_64BIT:
void *src = cp;
void *dst = (void *)dest;
void *dst2 = dst;
- int flag = 0;
+ int flag = 1;
uint offset = 0;
unsigned int shift;
uchar write_cmd;
cnt = len >> shift;
- while ((cnt-- > 0) && (flag == 0)) {
+ while ((cnt-- > 0) && (flag == 1)) {
switch (info->portwidth) {
case FLASH_CFI_8BIT:
flag = ((flash_read8(dst2) & flash_read8(src)) ==
flash_sect_t sect;
int st;
+ debug("%s: erasing sectors %d to %d\n", __func__, s_first, s_last);
+
if (info->flash_id != FLASH_MAN_CFI) {
puts ("Can't erase unknown flash type - aborted\n");
return 1;
for (sect = s_first; sect <= s_last; sect++) {
+ if (ctrlc()) {
+ printf("\n");
+ return 1;
+ }
+
if (info->protect[sect] == 0) { /* not protected */
+#ifdef CONFIG_SYS_FLASH_CHECK_BLANK_BEFORE_ERASE
+ int k;
+ int size;
+ int erased;
+ u32 *flash;
+
+ /*
+ * Check if whole sector is erased
+ */
+ size = flash_sector_size(info, sect);
+ erased = 1;
+ flash = (u32 *)info->start[sect];
+ /* divide by 4 for longword access */
+ size = size >> 2;
+ for (k = 0; k < size; k++) {
+ if (flash_read32(flash++) != 0xffffffff) {
+ erased = 0;
+ break;
+ }
+ }
+ if (erased) {
+ if (flash_verbose)
+ putc(',');
+ continue;
+ }
+#endif
switch (info->vendor) {
case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_STANDARD:
AMD_CMD_ERASE_START);
flash_unlock_seq (info, sect);
flash_write_cmd (info, sect, 0,
- AMD_CMD_ERASE_SECTOR);
+ info->cmd_erase_sector);
break;
#ifdef CONFIG_FLASH_CFI_LEGACY
case CFI_CMDSET_AMD_LEGACY:
}
if (use_flash_status_poll(info)) {
- cfiword_t cword = (cfiword_t)0xffffffffffffffffULL;
+ cfiword_t cword;
void *dest;
+ cword.ll = 0xffffffffffffffffULL;
dest = flash_map(info, sect, 0);
st = flash_status_poll(info, &cword, dest,
info->erase_blk_tout, "erase");
rcode = 1;
else if (flash_verbose)
putc ('.');
+ } else {
+ debug("\nSector %d is protected.\n",
+ info->protect[sect]);
}
}
printf(info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X",
info->device_id2);
}
+ if ((info->vendor == CFI_CMDSET_AMD_STANDARD) && (info->legacy_unlock))
+ printf("\n Advanced Sector Protection (PPB) enabled");
printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n",
info->erase_blk_tout,
info->write_tout);
src += i;
cnt -= i;
FLASH_SHOW_PROGRESS(scale, dots, digit, i);
+ /* Only check every once in a while */
+ if ((cnt & 0xFFFF) < buffered_size && ctrlc())
+ return ERR_ABORTED;
}
#else
while (cnt >= info->portwidth) {
wp += info->portwidth;
cnt -= info->portwidth;
FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth);
+ /* Only check every once in a while */
+ if ((cnt & 0xFFFF) < info->portwidth && ctrlc())
+ return ERR_ABORTED;
}
#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
return flash_write_cfiword (info, wp, cword);
}
+static inline int manufact_match(flash_info_t *info, u32 manu)
+{
+ return info->manufacturer_id == ((manu & FLASH_VENDMASK) >> 16);
+}
+
/*-----------------------------------------------------------------------
*/
#ifdef CONFIG_SYS_FLASH_PROTECTION
+static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot)
+{
+ if (manufact_match(info, INTEL_MANUFACT)
+ && info->device_id == NUMONYX_256MBIT) {
+ /*
+ * see errata called
+ * "Numonyx Axcell P33/P30 Specification Update" :)
+ */
+ flash_write_cmd(info, sector, 0, FLASH_CMD_READ_ID);
+ if (!flash_isequal(info, sector, FLASH_OFFSET_PROTECT,
+ prot)) {
+ /*
+ * cmd must come before FLASH_CMD_PROTECT + 20us
+ * Disable interrupts which might cause a timeout here.
+ */
+ int flag = disable_interrupts();
+ unsigned short cmd;
+
+ if (prot)
+ cmd = FLASH_CMD_PROTECT_SET;
+ else
+ cmd = FLASH_CMD_PROTECT_CLEAR;
+ flash_write_cmd(info, sector, 0,
+ FLASH_CMD_PROTECT);
+ flash_write_cmd(info, sector, 0, cmd);
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+ }
+ return 1;
+ }
+ return 0;
+}
+
int flash_real_protect (flash_info_t * info, long sector, int prot)
{
int retcode = 0;
case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
- /*
- * see errata called
- * "Numonyx Axcell P33/P30 Specification Update" :)
- */
- flash_write_cmd (info, sector, 0, FLASH_CMD_READ_ID);
- if (!flash_isequal (info, sector, FLASH_OFFSET_PROTECT,
- prot)) {
- /*
- * cmd must come before FLASH_CMD_PROTECT + 20us
- * Disable interrupts which might cause a timeout here.
- */
- int flag = disable_interrupts ();
- unsigned short cmd;
-
+ if (!cfi_protect_bugfix(info, sector, prot)) {
+ flash_write_cmd(info, sector, 0,
+ FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd(info, sector, 0,
+ FLASH_CMD_PROTECT);
if (prot)
- cmd = FLASH_CMD_PROTECT_SET;
+ flash_write_cmd(info, sector, 0,
+ FLASH_CMD_PROTECT_SET);
else
- cmd = FLASH_CMD_PROTECT_CLEAR;
+ flash_write_cmd(info, sector, 0,
+ FLASH_CMD_PROTECT_CLEAR);
- flash_write_cmd (info, sector, 0,
- FLASH_CMD_PROTECT);
- flash_write_cmd (info, sector, 0, cmd);
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
}
break;
case CFI_CMDSET_AMD_EXTENDED:
case CFI_CMDSET_AMD_STANDARD:
/* U-Boot only checks the first byte */
- if (info->manufacturer_id == (uchar)ATM_MANUFACT) {
+ if (manufact_match(info, ATM_MANUFACT)) {
if (prot) {
flash_unlock_seq (info, 0);
flash_write_cmd (info, 0,
0, ATM_CMD_UNLOCK_SECT);
}
}
+ if (info->legacy_unlock) {
+ int flag = disable_interrupts();
+ int lock_flag;
+
+ flash_unlock_seq(info, 0);
+ flash_write_cmd(info, 0, info->addr_unlock1,
+ AMD_CMD_SET_PPB_ENTRY);
+ lock_flag = flash_isset(info, sector, 0, 0x01);
+ if (prot) {
+ if (lock_flag) {
+ flash_write_cmd(info, sector, 0,
+ AMD_CMD_PPB_LOCK_BC1);
+ flash_write_cmd(info, sector, 0,
+ AMD_CMD_PPB_LOCK_BC2);
+ }
+ debug("sector %ld %slocked\n", sector,
+ lock_flag ? "" : "already ");
+ } else {
+ if (!lock_flag) {
+ debug("unlock %ld\n", sector);
+ flash_write_cmd(info, 0, 0,
+ AMD_CMD_PPB_UNLOCK_BC1);
+ flash_write_cmd(info, 0, 0,
+ AMD_CMD_PPB_UNLOCK_BC2);
+ }
+ debug("sector %ld %sunlocked\n", sector,
+ !lock_flag ? "" : "already ");
+ }
+ if (flag)
+ enable_interrupts();
+
+ if (flash_status_check(info, sector,
+ info->erase_blk_tout,
+ prot ? "protect" : "unprotect"))
+ printf("status check error\n");
+
+ flash_write_cmd(info, 0, 0,
+ AMD_CMD_SET_PPB_EXIT_BC1);
+ flash_write_cmd(info, 0, 0,
+ AMD_CMD_SET_PPB_EXIT_BC2);
+ }
break;
#ifdef CONFIG_FLASH_CFI_LEGACY
case CFI_CMDSET_AMD_LEGACY:
static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry)
{
info->cmd_reset = AMD_CMD_RESET;
+ info->cmd_erase_sector = AMD_CMD_ERASE_SECTOR;
cmdset_amd_read_jedec_ids(info);
flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+#ifdef CONFIG_SYS_FLASH_PROTECTION
+ if (info->ext_addr) {
+ /* read sector protect/unprotect scheme (at 0x49) */
+ if (flash_read_uchar(info, info->ext_addr + 9) == 0x8)
+ info->legacy_unlock = 1;
+ }
+#endif
+
return 0;
}
unsigned int i;
for (i = 0; i < len; i++)
- p[i] = flash_read_uchar(info, start + i);
+ p[i] = flash_read_uchar(info, start + (i * 2));
}
-void __flash_cmd_reset(flash_info_t *info)
+static void __flash_cmd_reset(flash_info_t *info)
{
/*
* We do not yet know what kind of commandset to use, so we issue
{
int cfi_offset;
- /* Issue FLASH reset command */
- flash_cmd_reset(info);
-
for (cfi_offset=0;
cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint);
cfi_offset++) {
+ /* Issue FLASH reset command */
+ flash_cmd_reset(info);
flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset],
FLASH_CMD_CFI);
- if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
- && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
- && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
+ if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q') &&
+ flash_isequal(info, 0,
+ FLASH_OFFSET_CFI_RESP + 2, 'R') &&
+ flash_isequal(info, 0,
+ FLASH_OFFSET_CFI_RESP + 4, 'Y')) {
flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP,
sizeof(struct cfi_qry));
+#ifdef CONFIG_SYS_FLASH_INTERFACE_WIDTH
+ info->interface = CONFIG_SYS_FLASH_INTERFACE_WIDTH;
+#else
info->interface = le16_to_cpu(qry->interface_desc);
-
+ /* Some flash chips can support multiple bus widths.
+ * In this case, override the interface width and
+ * limit it to the port width.
+ */
+ if ((info->interface == FLASH_CFI_X8X16) &&
+ (info->portwidth == FLASH_CFI_8BIT)) {
+ debug("Overriding 16-bit interface"
+ " width to 8-bit port width.\n");
+ info->interface = FLASH_CFI_X8;
+ } else if ((info->interface == FLASH_CFI_X16X32) &&
+ (info->portwidth == FLASH_CFI_16BIT)) {
+ debug("Overriding 16-bit interface"
+ " width to 16-bit port width.\n");
+ info->interface = FLASH_CFI_X16;
+ }
+#endif
info->cfi_offset = flash_offset_cfi[cfi_offset];
debug ("device interface is %d\n",
info->interface);
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
/* calculate command offsets as in the Linux driver */
- info->addr_unlock1 = 0x555;
- info->addr_unlock2 = 0x2aa;
+ info->addr_unlock1 = 0xaaa;
+ info->addr_unlock2 = 0x555;
/*
* modify the unlock address if we are
for (info->chipwidth = FLASH_CFI_BY8;
info->chipwidth <= info->portwidth;
info->chipwidth <<= 1)
- if (__flash_detect_cfi(info, qry))
+ if (__flash_detect_cfi(info, qry)) {
+ debug("Found CFI flash, portwidth %d,"
+ " chipwidth %d\n",
+ info->portwidth, info->chipwidth);
return 1;
+ }
}
debug ("not found\n");
return 0;
/* CFI < 1.1, try to guess from device id */
if ((info->device_id & 0x80) != 0)
cfi_reverse_geometry(qry);
- } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
+ } else if (flash_read_uchar(info, info->ext_addr + 0x1e) == 3) {
/* CFI >= 1.1, deduct from top/bottom flag */
/* note: ext_addr is valid since cfi_version > 0 */
cfi_reverse_geometry(qry);
}
}
+static void flash_fixup_sst(flash_info_t *info, struct cfi_qry *qry)
+{
+ /*
+ * SST, for many recent nor parallel flashes, says they are
+ * CFI-conformant. This is not true, since qry struct.
+ * reports a std. AMD command set (0x0002), while SST allows to
+ * erase two different sector sizes for the same memory.
+ * 64KB sector (SST call it block) needs 0x30 to be erased.
+ * 4KB sector (SST call it sector) needs 0x50 to be erased.
+ * Since CFI query detect the 4KB number of sectors, users expects
+ * a sector granularity of 4KB, and it is here set.
+ */
+ if (info->device_id == 0x5D23 || /* SST39VF3201B */
+ info->device_id == 0x5C23) { /* SST39VF3202B */
+ /* set sector granularity to 4KB */
+ info->cmd_erase_sector=0x50;
+ }
+}
+
+static void flash_fixup_num(flash_info_t *info, struct cfi_qry *qry)
+{
+ /*
+ * The M29EW devices seem to report the CFI information wrong
+ * when it's in 8 bit mode.
+ * There's an app note from Numonyx on this issue.
+ * So adjust the buffer size for M29EW while operating in 8-bit mode
+ */
+ if (((qry->max_buf_write_size) > 0x8) &&
+ (info->device_id == 0x7E) &&
+ (info->device_id2 == 0x2201 ||
+ info->device_id2 == 0x2301 ||
+ info->device_id2 == 0x2801 ||
+ info->device_id2 == 0x4801)) {
+ debug("Adjusted buffer size on Numonyx flash"
+ " M29EW family in 8 bit mode\n");
+ qry->max_buf_write_size = 0x8;
+ }
+}
+
/*
* The following code cannot be run from FLASH!
*
if (flash_detect_cfi (info, &qry)) {
info->vendor = le16_to_cpu(qry.p_id);
- info->ext_addr = le16_to_cpu(qry.p_adr);
+ info->ext_addr = le16_to_cpu(qry.p_adr) * 2;
+ debug("extended address is 0x%x\n", info->ext_addr);
num_erase_regions = qry.num_erase_regions;
if (info->ext_addr) {
info->cfi_version = (ushort) flash_read_uchar (info,
- info->ext_addr + 3) << 8;
+ info->ext_addr + 6) << 8;
info->cfi_version |= (ushort) flash_read_uchar (info,
- info->ext_addr + 4);
+ info->ext_addr + 8);
}
#ifdef DEBUG
case 0x0020:
flash_fixup_stm(info, &qry);
break;
+ case 0x00bf: /* SST */
+ flash_fixup_sst(info, &qry);
+ break;
+ case 0x0089: /* Numonyx */
+ flash_fixup_num(info, &qry);
+ break;
}
debug ("manufacturer is %d\n", info->vendor);
debug ("device id is 0x%x\n", info->device_id);
debug ("device id2 is 0x%x\n", info->device_id2);
debug ("cfi version is 0x%04x\n", info->cfi_version);
+ debug("port width: %d, chipwidth: %d, interface: %d\n",
+ info->portwidth, info->chipwidth, info->interface);
size_ratio = info->portwidth / info->chipwidth;
/* if the chip is x8/x16 reduce the ratio by half */
FLASH_OFFSET_PROTECT,
FLASH_STATUS_PROTECT);
break;
+ case CFI_CMDSET_AMD_EXTENDED:
+ case CFI_CMDSET_AMD_STANDARD:
+ if (!info->legacy_unlock) {
+ /* default: not protected */
+ info->protect[sect_cnt] = 0;
+ break;
+ }
+
+ /* Read protection (PPB) from sector */
+ flash_write_cmd(info, 0, 0,
+ info->cmd_reset);
+ flash_unlock_seq(info, 0);
+ flash_write_cmd(info, 0,
+ info->addr_unlock1,
+ FLASH_CMD_READ_ID);
+ info->protect[sect_cnt] =
+ flash_isset(
+ info, sect_cnt,
+ FLASH_OFFSET_PROTECT,
+ FLASH_STATUS_PROTECT);
+ break;
default:
/* default: not protected */
info->protect[sect_cnt] = 0;
projects / karo-tx-uboot.git / blobdiff